Shalu Agarwal | Yole: When does solid-state commercialization start, how big is the market by 2027, and where does it land first?
13:19 - 14:16
Other snippets from this talk
Summary of the clip:
When does solid-state commercialization start, how big is the market by 2027, and where does it land first?
Commercialization is being held back by more than cell chemistry. Analysts point to the scaling of manufacturing capacity for today's available lithium-ion batteries, together with supply-chain management for solid-state production, as factors slowing the transition. The forecast weighs both accelerating and decelerating factors across a dual development path, so timing depends as much on industrial capacity and supply-chain readiness as on the solid-state stack itself.
On the current status of the solid-state battery and its supply chain, commercialization is expected to start from 2025. By 2027 the market is forecast to reach 2.5 gigawatt-hours. That volume is a launch figure rather than the destination: mass production is expected to follow after 2027, when output moves beyond early lines into genuine volume.
Electric vehicles are the entry point. Initially the solid-state battery will be used in electric-vehicle applications, and only once commercialization is established does deployment widen — after mass production the battery is expected to appear in many other areas. The 2.5 gigawatt-hour 2027 figure therefore understates the eventual footprint; it marks the first commercial channel, not the full addressable demand.
In this short video, you can learn:
* Solid-state commercialization is expected to start from 2025, with the market reaching 2.5 gigawatt-hours by 2027.
* Mass production is forecast to follow after 2027, widening deployment beyond the first application.
* Scaling lithium-ion manufacturing capacity and solid-state supply-chain management are the named factors slowing commercialization.
📋 **Clip Abstract** Commercialization of solid-state batteries is forecast to begin in 2025 and to reach a 2.5 gigawatt-hour market by 2027, with mass production following after that. Deceleration comes from scaling today's lithium-ion manufacturing capacity and from solid-state supply-chain management, while electric vehicles serve as the first application before wider deployment.
About the speaker:
* Speaker: Shalu Agarwal
* Company: Yole
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#SolidStateBattery, #GigawattHourScale, #LithiumIonCapacityScaling, #EVPowertrain, #BatterySupplyChain, #NextGenCellChemistry
This is a highlight of the presentation:
Solid-state battery – the next-generation battery system
More Highlights from the same talk.
05:04 - 06:27
Which solid electrolyte chemistry is the industry actually betting on — and why sulfide over oxide?
Which solid electrolyte chemistry is the industry actually betting on — and why sulfide over oxide?
In a solid-state battery it is the electrolyte that makes the battery solid-state, so the electrolyte is the most important part of the system. Developers generally work with three families: inorganic-based, organic-based, and composites, which are mixtures of inorganic and organic electrolytes. Different developers have chosen different technology routes — a few companies work on organic electrolytes, others on inorganic, and others on composite formulations.
The first chart shows where developer interest actually sits: most companies are now making interest in inorganic-based solid-state battery electrolytes. Organic and composite approaches remain minority activities among the developers surveyed. So the broad direction of the industry is toward inorganic chemistries rather than organic or hybrid composite systems.
Within inorganics the field splits again, mainly into sulfide-based and oxide-based electrolytes, with other electrolytes also present. The second chart shows most companies — big names such as LG, Samsung and Toyota, plus startups like Solid Power and Ampacera — are mainly taking interest in sulfide-type electrolytes. The conclusion: many solid electrolytes exist, but most companies work on sulfide-based inorganic.
In this short video, you can learn:
* Solid electrolytes divide into inorganic-based, organic-based and composite families, and developers are split across all three routes.
* Most companies analysed are focusing on inorganic-based solid-state electrolytes rather than organic or composite ones.
* Among inorganic options, sulfide chemistries attract the largest group, including LG, Samsung, Toyota, Solid Power and Ampacera, ahead of oxide-based systems.
📋 **Clip Abstract** Because the electrolyte is what makes a battery solid-state, the developer landscape splits into inorganic, organic and composite approaches, with most interest concentrated on inorganic. Within inorganics, sulfide-based electrolytes draw the largest share — from LG, Samsung and Toyota to startups such as Solid Power and Ampacera — over oxide chemistries.
About the speaker:
* Speaker: Shalu Agarwal
* Company: Yole
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#SulfideElectrolyte, #InorganicElectrolyte, #CompositeElectrolyte, #OxideVsSulfide, #SolidStateBatteries, #BatteryMaterials
09:29 - 11:27
Why is a better battery the hardest sell — and what does that mean for solid-state cost pressure?
Why is a better battery the hardest sell — and what does that mean for solid-state cost pressure?
The decelerating factors start with unresolved technical challenges: several electrolytes cannot work at lower temperatures, and solid electrolytes have lower ionic conductivity than the liquid electrolytes they would replace. Companies are working to resolve these issues, but the status of solid-state batteries today shows many challenges still remaining rather than a solved materials stack.
Most companies are working on sulfide-based inorganic electrolytes, but that route is not easy to develop. During development, sulfide-based electrolytes can release H2S gas, which is toxic, and there are many more challenges alongside it — making the most popular materials choice also one of the hardest to bring forward.
Cost pressure works differently here. With any new technology the cost starts high, but solid-state must beat an incumbent that already performs well: lithium-ion works across most applications, including electric vehicles, so car OEMs, battery makers and consumers are not in a panic situation. Lithium-ion costs are also decreasing gradually, so a commercialised solid-state cell has to compete with today's available lithium-ion batteries.
In this short video, you can learn:
* Solid electrolytes give up the higher ionic conductivity of liquid electrolytes, and some cannot work at lower temperatures.
* Sulfide-based inorganic electrolytes, the dominant development route, can release toxic H2S gas during development.
* Unlike typical new technologies, solid-state batteries must displace a lithium-ion cell that already works well in EVs and is gradually getting cheaper.
📋 **Clip Abstract** The clip sets out the decelerating factors behind solid-state battery commercialisation, from low-temperature electrolyte limits and lower ionic conductivity to toxic H2S release in sulfide-based development. It then explains why cost pressure is unusual: lithium-ion already serves electric vehicles well and keeps getting cheaper, so solid-state must compete rather than fill a gap.
About the speaker:
* Speaker: Shalu Agarwal
* Company: Yole
* Event: Solid-State Batteries: Innovations, Promising Start-ups, Future Roadmap
* Location: Online
Join TechBlick to learn about the state of the art in solid state batteries, Si anode, advanced cathodes, sodium batteries, and beyond
https://www.techblick.com/
#SulfideElectrolyte, #IonicConductivity, #H2SRelease, #LithiumIonIncumbency, #SolidStateBatteries, #BatteryMaterials
About this talk
→ Solid-state battery – the next-generation battery system · Shalu Agarwal · Battery Materials: Next-Gen & Beyond Lithium Ion 2022


