Steliyan Vasilev | 3E Smart Solutions: Can textile-based dry electrodes ever match the signal quality of traditional wet gel electrodes, especially when dealing with motion artifacts?
19:13 - 20:39
Other snippets from this talk
Summary of the clip:
Can textile-based dry electrodes ever match the signal quality of traditional wet gel electrodes, especially when dealing with motion artifacts?
This clip addresses the critical performance of embroidered dry electrodes compared to the clinical gold-standard, wet gel electrodes. The speaker confirms their 3D "moss" embroidered electrodes are designed for dry use and have been benchmarked against other dry electrodes, showing superior performance. In some applications, such as ECG monitoring via a chest strap, their performance is almost identical to that of gel electrodes, a significant achievement for a comfortable, reusable textile solution.
The analysis provides crucial data on skin-electrode impedance and motion artifacts, two key challenges for wearable sensors. In dynamic tests involving motion, the embroidered textile electrodes were found to actively reduce motion artifacts compared to existing commercial products. This is attributed to the soft, three-dimensional structure of the electrode, which conforms well to the skin and maintains a more stable contact during movement, leading to a cleaner signal.
Beyond the inherent properties of the electrode, the speaker discusses strategies for further performance enhancement. The signal stability can be further improved by integrating materials like silicone into the textile structure around the electrodes. This addition helps to minimize the relative motion between the electrode and the skin, offering a practical engineering solution to prevent motion artifacts even more effectively in demanding, real-world athletic or medical monitoring scenarios.
In this short video, you can learn:
* How embroidered dry electrodes compare to traditional wet gel electrodes in signal quality.
* The performance of these textile electrodes in reducing motion artifacts during ECG measurements.
* Advanced strategies, like adding silicone, to further improve signal stability and skin contact.
π **Clip Abstract** Get a direct technical comparison between 3D embroidered dry electrodes and conventional gel electrodes for biomedical sensing. The analysis covers key performance metrics, including skin impedance and a surprising reduction in motion artifacts, validating their use in real-world wearable applications.
π Link in comments π
#EmbroideredElectrodes, #DryElectrodes, #MotionArtifactReduction, #SiliconeIntegration, #WearableElectronics, #BiomedicalSensing
This is a highlight of the presentation:
Driving Reliability and Scalability in E-Textiles and Wearables via Embroidery Technology
More Highlights from the same talk.
03:53 - 05:00
How can single embroidery machines transition from standard sewing to advanced wire routing and 3D electrode fabrication?
How can single embroidery machines transition from standard sewing to advanced wire routing and 3D electrode fabrication?
Computerized embroidery has evolved into a highly automated CNC process using specialized machine heads to integrate electronics into flexible substrates. This technical overview highlights ZSK's development system, which combines three distinct tooling heads to handle different manufacturing steps. By understanding how these heads operate, engineers can selectively apply different functional materials to a single fabric.
The F-head handles standard logo design and places conductive traces, while utilizing automated attachments to mount functional sequins and micro-PCBs. For biosignal acquisition and stimulation, the K-head produces three-dimensional moss or "nu" embroidery, maximizing active surface area to form high-performance textile electrodes. Finally, the W-head provides dedicated layout control for placing continuous wires, optic fibers, and micro-tubes.
Combining these specialized processes within a single production step enables the rapid prototyping and scaling of multi-functional e-textiles. Developers can seamlessly transition designs from single-head development tools up to high-volume multi-head industrial machines.
In this short video, you can learn:
* How the F, K, and W heads partition electrical, structural, and wiring tasks in e-textile fabrication.
* The mechanics of using moss embroidery to maximize surface area for dry textile electrodes.
* Methods for automating the placement of continuous wires, fibers, and tubes using computer-controlled heads.
π **Clip Abstract** This clip details the functional breakdown of ZSK's multi-head embroidery systems, explaining how F, K, and W heads handle distinct tasks like conductive trace placement, 3D electrode creation, and continuous wire routing. It shows how computerized CNC embroidery achieves high automation and scalability for complex smart textiles.
#DryTextileElectrodes, #TailoredWirePlacement, #MossEmbroidery, #CNCEmbroidery, #ETextiles, #FlexibleElectronics
13:11 - 14:44
Printed electronics versus smart embroidery: which technique is best for high-volume e-textile production?
Printed electronics versus smart embroidery: which technique is best for high-volume e-textile production?
When designing next-generation smart garments, engineers often face a strategic choice between printed electronics and computerized embroidery. Both technologies offer distinct physical and electrical advantages depending on the application's performance targets. Analyzing these tradeoffs is essential for choosing the correct manufacturing pipeline.
Embroidery excels in harsh environments, offering superior washability, direct monolithic integration of rigid surface-mount components, and breathable, 3D tactile structures ideal for electrodes. On the other hand, printed electronics provide sub-millimeter line resolution, the ability to build multi-layer insulated circuits, and higher cost-efficiency when covering large surface areas that would otherwise require millions of needle punctures.
Ultimately, commercial strategy shouldn't treat these processes as mutually exclusive competitors. The most advanced smart garments leverage a hybrid approach, combining the fine resolution of printed circuits with the robust structural interconnects and wire routing of automated embroidery.
In this short video, you can learn:
* The key performance tradeoffs between embroidered and printed conductive pathways in washability and durability.
* Why printing offers superior resolution and multi-layer insulation for complex circuit designs.
* How to strategically select or combine these technologies to optimize manufacturing speed, material costs, and textile breathability.
π **Clip Abstract** This clip compares the core technological advantages of computerized embroidery and printed electronics for e-textile fabrication. It highlights how balancing embroidery's durability and 3D structuring with printing's high resolution leads to optimized, hybrid product designs.
#SmartEmbroidery, #PrintedElectronics, #HybridETextiles, #ConductivePathways, #WearableElectronics, #FlexibleElectronics
06:22 - 08:36
How do you overcome the electrical resistance of conductive silver threads and the fragility of PCB-to-fabric interconnects?
How do you overcome the electrical resistance of conductive silver threads and the fragility of PCB-to-fabric interconnects?
Developing reliable e-textiles requires addressing the mechanical mismatch between rigid PCBs and soft fabrics. To secure these fragile transition zones, engineers must optimize stitch placement and establish specific geometric guidelines for the PCBs. Standardizing board parameters such as edge profiles, hole shapes, and substrate thicknesses allows automated embroidery systems to mount components without damaging the electrical paths.
Conductive yarns, such as silver-coated polymethyl lines, present a significant electrical challenge due to their high inherent resistivity of up to 200 ohms per meter. To mitigate this drop in voltage across long traces, the embroidery process can be programmed to lay down multiple overlapping passes. This multi-pass stitching technique acts as a parallel resistor circuit, effectively driving down the overall line resistance.
By leveraging specialized punching and programming software, engineers can pre-calculate and visualize trace geometries with up to four or more passes. This programmatic control over thread density ensures robust electrical performance while maintaining the natural drape and flexibility of the host textile.
In this short video, you can learn:
* How to design PCB geometries and holes specifically optimized for computerized needle penetration.
* The physics of reducing silver thread line resistance through programmatic multi-pass parallel routing.
* Software-driven trace design techniques using specialized industrial punching tools.
π **Clip Abstract** This clip addresses the critical engineering challenges of interconnect reliability and high thread resistivity in e-textiles. It explains how specialized PCB design guidelines and multi-pass parallel embroidery paths dramatically improve electrical performance and mechanical robustness.
#PCBtoFabricInterconnects, #ConductiveYarns, #MultiPassRouting, #EmbroideryElectronics, #SmartTextiles, #FlexibleElectronics