top of page

Takatoshi Abe

Panasonic

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Takatoshi Abe | Panasonic: How does a four-in-one tough film replace multiple layers to thin display stacks and cut processes?

04:44 - 05:40

Other snippets from this talk

Summary of the clip:

How does a four-in-one tough film replace multiple layers to thin display stacks and cut processes?

In this clip, Toughtelon is presented as a multifunctional shock-absorbing film. Its stated properties include stability across a wide range of temperature and shock, absorbance effectiveness and light blocking. The product development concept is built on four ideas: thinner displays, bending drivability, more functions and reliability. Material function and performance are discussed first through the goal of thinner displays.

Conventional construction is described as having many films, so customers need many processes and are fighting thickness. The tough film instead has a four-in-one structure. Its adhesive and double adhesive layers are said to provide light sealing and cushioning. This structure leads to the benefit of fewer processes and reduced thickness. The customer need is fewer processes and less thickness.

So the material function and performance start with thinner displays. The four development concepts are thinner displays, bending drivability, more functions and reliability. Stability across a wide temperature range, shock absorbance and light blocking are the stated properties. The four-in-one tough film combines adhesive, double adhesive, light sealing and cushioning. This is how the film targets thinner display stacks while adding functions.

In this short video, you can learn:
* Toughtelon targets thinner displays through a four-in-one structure.
* The film combines adhesive, double adhesive, light sealing and cushioning.
* Stated properties include wide-temperature shock stability, absorbance effectiveness and light blocking.

📋 **Clip Abstract** Toughtelon is a multifunctional shock-absorbing film with four development concepts: thinner displays, bending drivability, more functions and reliability. Its four-in-one structure combines adhesive and double adhesive layers for light sealing and cushioning, reducing processes and thickness versus conventional many-film construction.

About the speaker:
* Speaker: Takatoshi Abe
* Company: Panasonic
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#Toughtelon, #FourInOneStructure, #LightSealingAdhesive, #ShockAbsorbingFilm, #DisplayMaterials, #FlexibleDisplays

This is a highlight of the presentation:

Multifunctional Shock Absorb Film Material, Toughtelon

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

05:51 - 06:43

How many bending cycles at minus 20°C can Toughtelon survive versus conventional foam?

How many bending cycles at minus 20°C can Toughtelon survive versus conventional foam?

The Toughtelon shock-absorbing polymer resisted over 250 K bending cycles at minus 20 degrees C. The bending test used equipment shown in an actual picture, with a bending radius of 1.55 millimeters and a speed measured in RPM. This low-temperature bending test placed the polymer under repeated flexing, while the temperature was held at minus 20 C. The result is a cycle count beyond 250 K under those conditions.

Compared with standard conventional foam, the Toughtelon polymer showed a different failure point. After 125 K cycles, the conventional foam was tearing, described as completely tearing. The test therefore contrasted a shock-absorbing polymer that resisted over 250 K cycles against a conventional foam that tore after 125 K cycles. Both were evaluated under the same bending radius of 1.55 millimeters and minus 20 C temperature.

The bending test method used the equipment shown, with a bending radius of 1.55 millimeters. Speed is stated in RPM in the clip, though no numeric RPM value is given. The temperature was minus 20 C. The polymer's over 250 K bending cycles and the conventional foam's complete tearing after 125 K cycles are the key comparison reported. This supports shock-absorbing film performance under repeated bending at low temperature.

In this short video, you can learn:
* Toughtelon, a shock-absorbing polymer, resisted over 250 K bending cycles at minus 20 C.
* The bending test used a 1.55 millimeter bending radius at minus 20 C, with speed given in RPM.
* Conventional foam showed complete tearing after 125 K cycles under the same comparison.

📋 **Clip Abstract** Toughtelon, a shock-absorbing polymer, survived over 250 K bending cycles at minus 20 C in a bending test with a 1.55 millimeter bending radius. In the same comparison, conventional foam completely tore after 125 K cycles.

About the speaker:
* Speaker: Takatoshi Abe
* Company: Panasonic
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#ShockAbsorbingPolymer, #BendingCycleTest, #Minus20C, #ConventionalFoamTearing, #FlexibleElectronics, #PolymerMaterials

08:06 - 09:47

What do a 100 g steel-ball drop and accelerometer data reveal about Toughtelon shock absorption?

What do a 100 g steel-ball drop and accelerometer data reveal about Toughtelon shock absorption?

In the steel-ball drop test, a 100 g steel ball is dropped from 20 cm or 50 cm onto the shock-absorbing film, with glass underneath. The comparison material shows glass fracture even at the 20 cm drop. Toughtelon completely absorbs the shock from the 50 cm height, leaving the glass intact. That is the qualitative, pass/fail side of the evaluation.

The second evaluation uses accelerometers. A 14 g steel ball is dropped from 10 cm, and the normalized shock-absorption ratio is calculated with the formula shown. The vertical axis is normalized shock absorption ratio; the horizontal axis is thickness. Across that plot, Toughtelon showed the best shock absorption performance over a wide range of thicknesses. This turns a pass/fail drop test into a quantitative, thickness-dependent metric.

Together the two tests bracket performance. The steel-ball drop sets a go/no-go threshold at 20 cm and 50 cm, while the 14 g accelerometer test maps the normalized ratio against thickness. Toughtelon's advantage appears in both: full shock absorption at the 50 cm drop and the best shock absorption across a wide thickness range. The thickness sweep gives the more directly usable engineering number.

In this short video, you can learn:
* A 100 g steel ball from 20 cm fractures glass under the comparison film, while Toughtelon fully absorbs a 50 cm drop.
* Accelerometer testing with a 14 g ball from 10 cm produces a normalized shock-absorption ratio plotted against thickness.
* Toughtelon showed the best shock absorption performance over a wide range of thicknesses.

📋 **Clip Abstract** Toughtelon's shock absorption was tested two ways: a 100 g steel-ball drop from 20 cm or 50 cm onto a film backed by glass, and a 14 g ball drop from 10 cm measured with accelerometers. The comparison material fractured glass at 20 cm, while Toughtelon fully absorbed the 50 cm drop and gave the best normalized shock-absorption ratio across a wide thickness range.

About the speaker:
* Speaker: Takatoshi Abe
* Company: Panasonic
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#SteelBallDropTest, #NormalizedShockAbsorptionRatio, #AccelerometerDropTest, #ThicknessSweep, #ShockAbsorbingMaterials, #FlexibleElectronics


Other talks by Takatoshi Abe

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page