Thomas Tombs | Energy Materials Corporation: Why does 30 m/min roll-to-roll leave only 30 seconds for drying and annealing?
03:56 - 04:49
Other snippets from this talk
Summary of the clip:
Why does 30 m/min roll-to-roll leave only 30 seconds for drying and annealing?
High-speed perovskite deposition changes crystallization kinetics: material is deposited on a fast-moving web, dried, then annealed in a length-limited oven. A 15-metre oven at 30 metres per minute leaves only 30 seconds for drying and annealing. The speaker says most of the industry is not looking at this, and as far as he knows, they are the only ones.
The constraint is not confined to the perovskite absorber. All layers must be processed at high speed, which the transcript breaks into deposition of electrodes, scribing of interconnects, and deposition of barrier layers. That means the high-speed web and limited oven length impose requirements across the complete layer stack, not just on the perovskite deposition and drying step.
With a fixed oven length, line speed sets the available drying and annealing time. At 15 metres and 30 metres per minute, the budget is 30 seconds. Because crystallization kinetics differ vastly at high speed, the perovskite material and drying/annealing approach must be designed around that 30-second window rather than assuming slower deposition conditions.
In this short video, you can learn:
* A 15-metre oven at 30 metres per minute gives 30 seconds for drying and annealing.
* High-speed perovskite deposition has vastly different crystallization kinetics from slower processes.
* Every layer must be high-speed: electrodes, interconnect scribing and barrier layers.
📋 **Clip Abstract** High-speed roll-to-roll perovskite deposition changes crystallization kinetics and forces drying and annealing into a fixed oven length: 15 metres at 30 metres per minute equals 30 seconds. The same speed requirement extends to electrode deposition, interconnect scribing and barrier layers.
About the speaker:
* Speaker: Thomas Tombs
* Company: Energy Materials Corporation
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteDeposition, #RollToRollDrying, #CrystallizationKinetics, #BarrierLayerDeposition, #PerovskitePV, #RollToRollManufacturing
This is a highlight of the presentation:
Realizing the full potential of Perovskite PV with High-Speed Roll-to-Roll Production
21 and 22 OCT 2026
Estrel, Berlin
Organised By:
More Highlights from the same talk.
05:02 - 06:50
How much lower is roll-to-roll CapEx than CdTe, silicon or perovskite batch production?
How much lower is roll-to-roll CapEx than CdTe, silicon or perovskite batch production?
Equipment quotes worldwide show CapEx scaling with factory output. At Kodak, high-speed roll-to-roll exceeded 100 meters per minute; in solar, “high speed” can mean faster than two meters per minute. Capacity rises sharply once lines run fast, but small factories push equipment costs and cost per watt upward. Starting at high speed is essential and difficult: a niche 20 million square meters per year is not the entry point.
At three to four gigawatts, quoted CapEx for CdTe is about six times higher than roll-to-roll. Silicon is about 15 times higher, excluding silicon production itself. U.S. perovskite estimates are about five times higher—less than CdTe—though these estimates might be off slightly. The benefit is vastly lower cost of capital than any other solar production method.
The reason is tool architecture: a single roll-to-roll tool replaces all the batch-mode tools used for the other technologies. That changes the capital equation but it also forces high-speed operation from the start. Low-speed or small-scale entry does not protect cost per watt; it inflates the equipment burden. High production capacity is the payoff once the speed challenge is met.
In this short video, you can learn:
* At three to four gigawatts, roll-to-roll CapEx is about six times lower than CdTe, 15 times lower than silicon excluding silicon production, and about five times lower than U.S. perovskite estimates.
* High-speed roll-to-roll was above 100 meters per minute at Kodak, while solar industry high speed can mean faster than two meters per minute.
* A single roll-to-roll tool replaces batch-mode tools used by other technologies, so small factories raise equipment costs and cost per watt.
📋 **Clip Abstract** Worldwide equipment quotes show CapEx scaling with factory output, and high-speed roll-to-roll capacity only becomes cost-effective at large scale. At three to four gigawatts, roll-to-roll capital is about six times below CdTe, 15 times below silicon excluding silicon production, and about five times below U.S. perovskite estimates.
About the speaker:
* Speaker: Thomas Tombs
* Company: Energy Materials Corporation
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#RollToRollCapEx, #HighSpeedRollToRoll, #PerovskiteCapEx, #BatchModeTools, #PerovskitePV, #SolarManufacturing
10:51 - 11:44
Can a 15-year perovskite module still win on customer ROI versus glass-based PV?
Can a 15-year perovskite module still win on customer ROI versus glass-based PV?
Durability is an issue for perovskites. Moving from glass to polymers is not expected to be quite as long-lasting. The question becomes whether a viable product exists when durability is less. A 15-year perovskite product is framed as acceptable if the cost is low enough for customers.
With a low-cost product, customers can calculate the return on invested capital and find that it goes up. That is what customers really care about: they want to make more money on their investment. The metric they focus on is how much energy they get out based on how much they invest.
Low-cost perovskite PV is presented as the way to deliver that customer outcome. The argument does not rely on matching glass-based lifetime; it relies on economics. If the lower durability product is cheap enough, the customer return can still improve, and that is the stated basis for a viable perovskite PV offer.
In this short video, you can learn:
* Perovskite durability is identified as an issue, and moving from glass to polymers is not expected to be quite as long-lasting.
* A 15-year perovskite product can still be viable if its cost is low enough, because customers calculate return on invested capital and see it go up.
* Customers care about how much energy they get out based on how much they invest, so low-cost perovskite PV is the stated way to meet that demand.
📋 **Clip Abstract** The clip addresses whether lower perovskite durability can still support a viable product when moving from glass to polymers. It argues that a 15-year perovskite module with low cost can improve customer return on invested capital, because customers prioritize energy output relative to investment.
About the speaker:
* Speaker: Thomas Tombs
* Company: Energy Materials Corporation
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteDurability, #GlassToPolymers, #ReturnOnInvestedCapital, #LowCostPerovskitePV, #PerovskitePV, #SolarCellEconomics
07:05 - 08:32
Why does cost per watt flatten above 30 m/min, and what then dominates module cost?
Why does cost per watt flatten above 30 m/min, and what then dominates module cost?
Roll-to-roll carries a CapEx challenge: it has to be fast, or it becomes expensive. Above 20 to 30 metres per minute the cost curve levels out, even though roll-to-roll can run at 1,000 metres per minute. The chart is built on material and equipment quotes from suppliers in the US and Europe.
The levelling off happens because cost becomes the cost of materials. Labour, energy and equipment costs go close to zero once speeds get really high. What remains is fixed: glass encapsulation materials, frames and the junction box account for most of the module cost, so pushing speed further buys little.
Removing the glass and substituting a low-cost barrier is the next lever. With a low-cost polymer encapsulation the cost falls further, because so much of the total sits in the glass and the frame. The same approach can be applied to tandems.
In this short video, you can learn:
* Roll-to-roll throughput beyond roughly 20 to 30 metres per minute stops reducing cost per watt, even though the process itself can reach 1,000 metres per minute.
* At high speed the labour, energy and equipment contributions approach zero, leaving materials as the dominant cost driver.
* Glass encapsulation, frames and junction boxes are fixed costs, so a low-cost polymer barrier removes them, and the same route applies to tandems.
📋 **Clip Abstract** Cost-per-watt curves for roll-to-roll production flatten above roughly 20 to 30 metres per minute, according to material and equipment quotes from US and European suppliers. Because labour, energy and equipment costs approach zero at high throughput, fixed glass encapsulation, frame and junction-box costs dominate, and swapping glass for a low-cost polymer barrier pushes module cost lower, with the same logic applicable to tandems.
About the speaker:
* Speaker: Thomas Tombs
* Company: Energy Materials Corporation
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#RollToRollCoating, #LowCostPolymerEncapsulation, #GlassFreeModules, #JunctionBoxCost, #PerovskitePV, #TandemSolar
About this talk
→ Realizing the full potential of Perovskite PV with High-Speed Roll-to-Roll Production · Thomas Tombs · Perovskite Connect 2026
Other talks by Thomas Tombs
- Commercializing High-speed Production of Perovskite Solar Panels · The Future of Electronics RESHAPED 2024 USA


