top of page

Tommy Höglund

DP Patterning

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Tommy Höglund | DP Patterning: What feature-size limits force a hybrid approach combining mechanical substrate patterning with printed electronics for fan-out?

18:26 - 19:21

Other snippets from this talk

Summary of the clip:

What feature-size limits force a hybrid approach combining mechanical substrate patterning with printed electronics for fan-out?

DP Patterning's mechanical material scraping process operates within defined physical resolution limits. Current capabilities constrain feature sizes to 300 micron lines and 100 micron gaps. Because material is mechanically removed from the substrate, the process cannot achieve ultra-fine pitch structures on its own. Consequently, this mechanical subtraction method is not suitable for every electronic pattern requirement, establishing a clear threshold for where additional manufacturing techniques become necessary.

The resolution constraints of mechanical patterning highlight the strategic need for industry partnerships. When applications require much finer trace geometry to mount microchips or delicate electronic components, relying solely on mechanical removal is insufficient. Collaboration allows manufacturers to integrate complementary processes, combining the high-volume economic and environmental benefits of mechanical substrate processing with fine-line manufacturing methods without attempting to push mechanical scraping beyond its fundamental capabilities.

A practical hybrid approach utilizes the mechanically patterned substrate as a cost-efficient and sustainable base layer. For high-density chip placement requiring narrow trace spacing, additive printed electronics are applied directly onto the base structure to create the required fan-out. This combined architecture leverages the low-cost bulk conductivity of mechanically scraped circuits alongside the precise resolution of printed electronics for localized fine-pitch interconnects.

In this short video, you can learn:
* Mechanical scraping processes face feature size limits of 300 micron lines and 100 micron gaps.
* Fine-pitch chip placement requires hybrid manufacturing partnerships to overcome mechanical resolution limits.
* Printed electronics can add fine-line fan-out structures directly onto a mechanically patterned base substrate.

📋 **Clip Abstract** Mechanical substrate removal techniques face resolution limits of 300 micron lines and 100 micron gaps, rendering them unsuitable for fine-pitch chip placement on their own. Combining this cost-efficient base layer with printed electronics for fan-out structures provides a practical hybrid manufacturing strategy.

About the speaker:
* Speaker: Tommy Höglund
* Company: DP Patterning
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#MechanicalScraping, #PrintedElectronics, #FanOutInterconnects, #FeatureSizeLimits, #FlexibleElectronics, #SustainableElectronics

This is a highlight of the presentation:

Sustainable Meets Cost-Efficient: A New Standard for Flexible Electronics Manufacturing

Sustainable Electronics RESHAPED 2026 | Berlin

​

20-21 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

06:26 - 07:56

How can a purely mechanical roll-to-roll cutter and printing plate pattern a single-layer flex laminate?

How can a purely mechanical roll-to-roll cutter and printing plate pattern a single-layer flex laminate?

The input is a flex laminate bought on the open market, run through a mechanical roll-to-roll process. A cutter sits on one side; on the other side a cylinder carries a printing plate. At selected places the plate protrudes the foil into the cutter, so the metal backs away into the cavities and hides from the cutting edge. What remains is the pattern on a roll.

The demonstration part is a distributed antenna from Ericsson, produced on a roll. The material cut away is what gets protruded into the cutter, which is why it reads as very simple at first glance. It nevertheless demands real process knowledge, and that is why the step was taken all the way to production to best support customers.

Scope is deliberately narrow: single-layer flex PCB production, positioned on cost efficiency and sustainability at the same time. The claim is that the hardware is mostly process — a machine and a process sold together as the invented asset, not a machine alone. The two benefits are illustrated side by side in a single comparison.

In this short video, you can learn:
* Selected areas are protruded by a printing plate into the cutter, letting the metal back into cavities and hide from the blade.
* What stays on the roll is the finished pattern, shown in the clip as an Ericsson distributed antenna.
* The apparent simplicity is deceptive: it needs process knowledge, which is why production support was added.

📋 **Clip Abstract** A mechanical roll-to-roll tool pairs a cutter with a printing plate on a counter-cylinder, protruding chosen foil areas into the blade so the metal retreats into cavities and the pattern stays on the roll. The demonstrated output is an Ericsson distributed antenna on single-layer flex laminate, pitched on cost efficiency and sustainability together.

About the speaker:
* Speaker: Tommy Höglund
* Company: DP Patterning
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#RollToRollCutting, #FlexLaminatePatterning, #PrintingPlateProtrusion, #DistributedAntenna, #FlexibleElectronics, #SustainableElectronics

19:37 - 20:59

Can aluminum flex processing move to copper or FR4, and what foil constraints remain?

Can aluminum flex processing move to copper or FR4, and what foil constraints remain?

Aluminum is the material under discussion, and copper is on development: there are really nice pilot samples with copper, but the process is not at industrial scale yet. To solder onto aluminum, the material used is copper clad aluminum, with 150 nanometers of copper on top of the aluminum. That copper layer makes soldering onto aluminum possible.

If PET is used as base substrate, low-temperature soldering is needed, so the substrate choice changes the soldering process. For FR4, the speaker did not know; the suggestion was to come to the booth, explain, and then have a look. No FR4 result was given.

Very thin FR4 was proposed as a way to get very close to existing PCB technology. The speaker did not confirm it; the requirement is that the material must be very flexible for the process. It must follow the shape of the cylinder and duck away in the cavities from the cutter.

In this short video, you can learn:
* Copper processing has produced really nice pilot samples but is not yet at industrial scale.
* Copper clad aluminum uses 150 nanometers of copper on top of aluminum to enable soldering.
* PET substrates require low-temperature soldering, while the FR4 question remains open because the foil must be very flexible and follow the cylinder and cutter cavities.

📋 **Clip Abstract** The discussion compares aluminum processing with copper and FR4 options. Copper has really nice pilot samples but no industrial scale, copper clad aluminum with 150 nanometers of copper enables soldering, PET needs low-temperature soldering, and FR4 remains open pending a very flexible foil that follows the cylinder and ducks away from cutter cavities.

About the speaker:
* Speaker: Tommy Höglund
* Company: DP Patterning
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#CopperCladAluminum, #150nmCopper, #LowTemperatureSoldering, #PETSubstrate, #FlexibleElectronics, #PrintedElectronics

10:48 - 12:16

Fraunhofer LCA: can an aluminum heater process cut etching waste from 1.5 kg/m² to 12 g?

Fraunhofer LCA: can an aluminum heater process cut etching waste from 1.5 kg/m² to 12 g?

A company using chemical etching compared one square metre of aluminum etching with the alternative process. Etching generated a bit more than 1.5 kg of waste per square metre; the alternative left 12 g of aluminum flakes for a local recycling company. The speaker stressed that this material difference matters, but it is not the main source of the sustainability benefit.

The larger impact comes from process efficiency, not only waste mass. The process uses little water and little energy, which the speaker says creates a big impact versus etching. A Fraunhofer Institute life cycle assessment of a heater product quantified this: the clip cites a 99% emission reduction and a 98–99% result as evidence.

The speaker concludes that the sustainability result pays off while the process remains cost-efficient and cost-competitive with even Asian producers. That pairing—environmental performance plus manufacturing cost—is the core commercial message. The LCA and waste comparison are presented as evidence that sustainable production can also be cost-efficient.

In this short video, you can learn:
* Chemical etching of one square metre of aluminum produces a bit more than 1.5 kg of waste, while the alternative leaves 12 g of aluminum flakes for local recycling.
* A Fraunhofer Institute life cycle assessment of a heater product cites a 99% emission reduction and a 98–99% result.
* The main sustainability benefit is attributed to low water and energy use, and the process is described as cost-competitive with even Asian producers.

📋 **Clip Abstract** A chemical-etching comparison shows more than 1.5 kg of waste per square metre versus 12 g of aluminum flakes from the alternative process. A Fraunhofer life cycle assessment of a heater product cites a 99% emission reduction and a 98–99% result, attributed mainly to low water and energy use and paired with cost competitiveness against Asian producers.

About the speaker:
* Speaker: Tommy Höglund
* Company: DP Patterning
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#AluminumEtching, #FraunhoferLCA, #EmissionReduction, #AluminumFlakesRecycling, #SustainableElectronics, #FlexibleElectronicsManufacturing


About this talk

→ Sustainable Meets Cost-Efficient: A New Standard for Flexible Electronics Manufacturing · Tommy Höglund · Sustainable Electronics RESHAPED 2026 Berlin


Other talks by Tommy Höglund

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page