top of page

Valentin Storz

NanoDimension

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Valentin Storz | NanoDimension: How do you build a PCB without a substrate, using only dielectric and silver-nano inks?

01:26 - 03:12

Other snippets from this talk

Summary of the clip:

How do you build a PCB without a substrate, using only dielectric and silver-nano inks?

Additively manufactured electronics, delivered in a machine the size of two refrigerators, uses two inks: a photopolymer dielectric ink and a conductive silver nano ink. Together they produce three-dimensional electromechanical structures — a printed circuit board or something else. Essentially all the steps of PCB production are compressed into that single machine footprint.

The key point is that nothing is printed on a substrate. The machine starts with an empty plate made of glass or plastics and then builds up a three-dimensional structure out of the two materials, dielectric and silver nano ink. Whatever the target — antenna, board, electromechanical device — the printed structure is the part itself.

Standard Gerber files drive the process, uploaded by the machine — the computer sits on the right — via a USB stick or over the internet. Drill guides, STL files or any kind of picture file also feed it, letting the same tool print antennas, boards, electromechanical devices or 3D MID. The machine carries a price tag of about €400,000–450,000.

In this short video, you can learn:
* Two inks — a photopolymer dielectric and a silver nano ink — are the only materials needed to build a three-dimensional electromechanical structure.
* Because nothing is printed on a substrate, the machine begins from an empty glass or plastics plate and adds the structure itself.
* Standard Gerber, drill guide, STL or picture files feed the machine, which sells for roughly €400,000–450,000.

📋 **Clip Abstract** Additively manufactured electronics replaces substrate-based PCB production with a two-ink additive process: a photopolymer dielectric and a conductive silver nano ink. Standard Gerber, drill guide, STL or image files drive a refrigerator-sized machine that prints antennas, boards and 3D MID from an empty glass or plastics plate.

About the speaker:
* Speaker: Valentin Storz
* Company: NanoDimension
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#SilverNanoInk, #PhotopolymerDielectric, #GerberFiles, #3DMID, #AdditiveElectronics, #PrintedElectronics

This is a highlight of the presentation:

Current Applications and Outlook of 3D Printed Electronics

Printed, Flexible, Hybrid & InMold Electronics 2021

​

10-11 March 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

13:12 - 15:41

How do 36-micron dots, 2.8 dielectric constant and two reflows constrain 3D-printed PCB design rules?

How do 36-micron dots, 2.8 dielectric constant and two reflows constrain 3D-printed PCB design rules?

The material differs from FR4 and needs a lower reflow temperature; its glass temperature is about 140°C. Because it is also the structural material and has no fiber reinforcement, it may warp, especially through two reflow passes. Its dielectric constant is around 2.8 over the given frequency range, with dielectric loss also displayed.

Dimensional design rules span 160 by 160 millimeters with a 3-millimeter set height. A signal layer needs about 70 microns and a dielectric layer about 35 microns. That lets a 3-millimeter structure build 50 to 60 layers very easily. These rules are not the mechanical limits of the system.

The system prints with a 36-micron dot size, so traces should be multiples of 36 microns—72, 108 or 144. A 90-micron design forces the algorithm to choose two or three pixels; two pixels, at 72 or 75 microns, usually work. On diagonals with only 17-micron trace thickness, three pixels are needed to guarantee high yields.

In this short video, you can learn:
* The printed material needs a lower reflow temperature than FR4 and may warp through two reflows because it is unreinforced structural material with a glass temperature near 140°C.
* Design rules allow 160 by 160 millimeters and 3 millimeters height, with 70-micron signal and 35-micron dielectric layers enabling 50 to 60 layers.
* A 36-micron dot size makes 72-, 108- or 144-micron traces natural, while diagonal 17-micron traces need three pixels for high yields.

📋 **Clip Abstract** The clip details how an unreinforced structural material with roughly 140°C glass temperature, dielectric constant near 2.8 and no fiber reinforcement demands lower reflow temperatures and risks warpage across two passes. It then maps 160 by 160 millimeter, 3-millimeter-high design rules, 70-micron signal and 35-micron dielectric layers, and 36-micron dot-size constraints to 50–60 layers and yield-driven trace widths.

About the speaker:
* Speaker: Valentin Storz
* Company: NanoDimension
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#36MicronDotSize, #TwoReflowWarpage, #DielectricConstant28, #ThreePixelTraceYield, #3DPrintedElectronics, #PrintedCircuitBoards

17:03 - 19:24

How does 3D-printed packaging beat wire bonding and cut PCB prototyping from months to weeks?

How does 3D-printed packaging beat wire bonding and cut PCB prototyping from months to weeks?

At IIT, a government-sponsored research institute, the system supports a stable process for biosensors in and around the body: biochemical, ultrasound, flow and piezoelectric sensors. For a flow sensor, conventional packaging used wire bonding with four small wires at the corners, which was not durable in flow. The alternative is a complete sealed package: print the base, insert the bare die, then overprint it.

Hensoldt’s example is a 10-layer HDI board, populated on both sides, used for rapid prototyping in-house. Gerber files go onto the system; you push a button, launch a print job, and depending on size and quantity the finished board is in your hands a couple of hours later for circuit assembly. That reduced conventional prototyping time, because a huge list of boards must be produced, from months to weeks.

For piezo skin, an energy-harvester foil, earlier packaging broke due to movement. Several packaging solutions were examined; a classical 3D-printed solution did not lead to the right result. The final packaging, realized with the DragonFly system, prints the base plate, inserts the piezoelectric foil and completely overprints it. This addresses the durability problem caused by foil movement.

In this short video, you can learn:
* For an IIT flow sensor, wire bonding with four corner wires was not durable in flow, whereas a printed base, inserted bare die and overprint formed a complete sealed package.
* Hensoldt’s 10-layer HDI board, populated on both sides, went from Gerber files to a finished in-house board in a couple of hours depending on size and quantity, reducing prototyping from months to weeks.
* For piezo skin, a classical 3D-printed package failed, but a DragonFly process printing the base plate, inserting the piezoelectric foil and completely overprinting it addressed movement-induced breakage.

📋 **Clip Abstract** The clip contrasts wire-bonded flow-sensor packaging with a sealed printed package where a bare die is inserted and overprinted, and shows a 10-layer HDI board prototyped in-house from Gerber files in hours, cutting months to weeks. It also reports that a classical 3D-printed package failed for a piezoelectric energy-harvester foil, while a DragonFly process with printed base plate and complete overprint addressed movement-induced breakage.

About the speaker:
* Speaker: Valentin Storz
* Company: NanoDimension
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#WireBonding, #OverprintedPackaging, #HDIPrototyping, #PiezoelectricFoil, #PrintedElectronics, #AdditiveElectronics


About this talk

→ Current Applications and Outlook of 3D Printed Electronics · Valentin Storz · Printed, Flexible, Hybrid, & InMold Electronics 2021

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page