top of page

Victor Thenot

Tageos

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Victor Thenot | Tageos: Which paper RFID designs cut footprint 35%, and where does copper still fail against silver?

09:35 - 11:56

Other snippets from this talk

Summary of the clip:

Which paper RFID designs cut footprint 35%, and where does copper still fail against silver?

Copper-based formulations and silver-plated copper are being qualified as alternatives to silver, which is widely adopted but expensive and sometimes difficult to recycle. Copper offers better disposability, biodegradability and a much lower price, yet challenges remain: additional curing steps are not easy to implement in roll-to-roll, and reliability, adhesion and aging issues still need resolution.

A thick-paper smart-card converting process uses a paper-based inlay, printed antenna and paper front material, laminated and delivered as sheets that can be die-cut into hotel key cards or gift cards. The EO0 product family combines antenna manufacturing technologies to reduce emissions and impact; replacing PET inlays with paper inlays removes layers and cuts footprint by about 35%.

The newest EO0 release is a laser-cut aluminum antenna on paper with a printed conductive bridge using silver ink and an ultra-low carbon footprint flex IC from Pragmatic. This example shows how material substitution, antenna design and assembly choices are being combined in a printable, paper-based RFID and NFC path rather than relying solely on silver.

In this short video, you can learn:
* Paper inlays replacing PET inlays remove layers and reduce footprint by about 35%.
* Copper and silver-plated copper lower cost and improve disposability versus silver, but additional curing, adhesion, reliability and aging issues remain.
* The latest EO0 product pairs a laser-cut aluminum antenna on paper with a silver-ink printed conductive bridge and Pragmatic’s ultra-low carbon footprint flex IC.

📋 **Clip Abstract** This clip examines copper-based and silver-plated copper formulations as lower-cost, more disposable alternatives to silver for paper electronics, while flagging roll-to-roll curing, adhesion, reliability and aging hurdles. It also details a thick-paper smart-card converting route and an EO0 laser-cut aluminum antenna on paper with a silver-ink printed bridge, reporting about 35% footprint reduction when paper inlays replace PET.

About the speaker:
* Speaker: Victor Thenot
* Company: Tageos
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#PaperBasedInlay, #SilverPlatedCopper, #LaserCutAluminumAntenna, #PrintedConductiveBridge, #SustainableRFID, #PrintedElectronics

This is a highlight of the presentation:

Printed Electronics Meets Paper: Scalable Paths to Sustainable RFID and NFC

Sustainable Electronics RESHAPED 2026 | Berlin

​

20-21 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

05:07 - 06:51

Can printed electronics survive industrial RFID quality, or does the hybrid chip-on-flex approach win?

Can printed electronics survive industrial RFID quality, or does the hybrid chip-on-flex approach win?

The additive approach places material only where it is necessary, which is also a sustainability advantage. Early in printed electronics, the question was whether everything could be printed; the answer was mostly yes. Transistors and chipless RFID can be printed, and many applications are reported in the literature and in labs. Industrial production then imposes a reality check on fully printed systems.

Fully printed systems do not always meet customers' strong quality expectations. Printed antennas can suffer lower conductivity than bulk metal, bad resolution in the bonding area of very small chips, oxidation and cracks. Multi-layer production adds registration-accuracy issues. These are the practical failure modes that separate lab demonstrations from industrial RFID and NFC quality.

The hybrid approach is considered more relevant: print what can be easily printed, then bond a silicone-based component into the flexible substrate to add functionality. This hybrid route is the core business. Whatever the RFID frequency, a silicone component must be bonded at the end to give the product all its functionality.

In this short video, you can learn:
* Additive processing reduces material use by placing material only where necessary, supporting sustainability.
* Fully printed antennas and multi-layer RFID structures face conductivity, bonding-resolution, oxidation, crack and registration limits.
* Hybrid production prints what is easy and bonds a silicone-based component into the flexible substrate to deliver full RFID functionality at any frequency.

📋 **Clip Abstract** Additive printing offers material efficiency and can produce transistors and chipless RFID, but fully printed systems struggle with industrial quality: lower conductivity than bulk metal, bonding-area resolution, oxidation, cracks and multi-layer registration. The hybrid route prints what is easy and bonds a silicone-based component into the flexible substrate, with a bonded silicone component required at every RFID frequency to deliver full functionality.

About the speaker:
* Speaker: Victor Thenot
* Company: Tageos
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#PrintedAntennaConductivity, #SiliconeComponentBonding, #ChiplessRFID, #MultiLayerRegistration, #FlexibleElectronics, #SustainableElectronics

15:19 - 16:40

When does a primary zinc-on-paper battery beat rechargeable power for smart labels?

When does a primary zinc-on-paper battery beat rechargeable power for smart labels?

The first answer is duty cycle. In logistics and sensor tracking, labels often need to report for only a few days or a few weeks, and collecting them at end of life is difficult. For that window, a primary printed battery removes the collection burden entirely: the label does not have to come back to be recharged, it only has to survive the measurement period.

The chemistry is the second argument. A zinc-based printed battery contains no lithium, no heavy metals and no harmful components. Combined with a paper substrate, the end-of-life route is plausible rather than theoretical: the label can be repulped and the components separated, so the printed power source does not block paper recycling.

The crossover is lifetime. For products with a longer service life the answer reverses: a rechargeable battery charged by NFC harvesting becomes the better option, and that route is under active evaluation. What is not yet fixed is who builds it, since the path forward may run through a partner or stay internal.

In this short video, you can learn:
* Primary printed batteries fit logistics sensors that need tracking for only a few days or weeks, where collecting labels afterwards is impractical.
* Zinc-based cells avoid lithium, heavy metals and harmful components, and on paper they can be repulped so the components are separated.
* For longer-lifetime products, rechargeable cells topped up by NFC harvesting are the better option and are being evaluated.

📋 **Clip Abstract** Primary printed zinc batteries are positioned as the right power source for labels that sense for only days or weeks and cannot be collected at end of life, because the chemistry carries no lithium, heavy metals or harmful components and can be repulped with paper. Where product lifetime is longer, the argument flips to rechargeable cells topped up by NFC harvesting, a route still under evaluation alongside the decision to build internally or with a partner.

About the speaker:
* Speaker: Victor Thenot
* Company: Tageos
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#ZincPrintedBattery, #PaperRepulping, #NFCHarvestingRecharge, #PrimaryCellLogistics, #PrintedElectronics, #SustainableElectronics

07:42 - 09:41

Should every function be printed, and which three value tests decide where additive processing wins?

Should every function be printed, and which three value tests decide where additive processing wins?

The starting question shifts from “Can we print it?” to “Why should we print it?” Only functions that pass at least one of three tests should be printed: technical value, where printing enables stretchable electronics or other difficult functionalities; environmental value, where printed electronics coupled with paper reduce impact; and business value, through lower cost, faster speed to market or product differentiation. Life cycle assessment across every product and overall operation guides that selection.

High conductivity is the counterexample: printing is sometimes not enough, and bulk metal such as aluminum or copper is better. Stretchable electronics on TPU is the opposing case, where commercially available stretchable inks are a good solution. For local sensing or autonomous systems, printing the sensor and printing the battery on the same device can make sense. The decision is function-specific, not a blanket printing rule.

For sustainability, coupling paper substrates with printed electronics is described as a nice combination, and the talk moves into case studies on paper electronics. The practical filter is: print only where technical, environmental or business value is created; use bulk aluminum or copper where very high conductivity is required; use stretchable ink on TPU where stretchability is required; print sensors and batteries where local sensing or autonomy is required.

In this short video, you can learn:
* Printing should be reserved for functions that pass at least one of three value tests: technical, environmental or business.
* High conductivity can favor bulk aluminum or copper, while stretchable TPU applications can favor commercially available stretchable inks.
* Life cycle assessment per product and across overall operations guides selection to reduce environmental impact.

📋 **Clip Abstract** The clip reframes printing from a capability question to a value test: print only when a function delivers technical, environmental or business value. It contrasts high-conductivity cases where bulk aluminum or copper wins with stretchable TPU, local sensing, printed batteries and paper substrates, using product-level life cycle assessment to guide selection.

About the speaker:
* Speaker: Victor Thenot
* Company: Tageos
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped

#LifeCycleAssessment, #PaperSubstrates, #StretchableInk, #BulkMetalConductivity, #PrintedElectronics, #SustainableElectronics


About this talk

→ Printed Electronics Meets Paper: Scalable Paths to Sustainable RFID and NFC · Victor Thenot · Sustainable Electronics RESHAPED 2026 Berlin

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page