Vladimir Popok | FOM Technologies: Why does perovskite tandem power conversion efficiency drop from 35% on one square centimeter to 15β20% at industrial scale?
00:55 - 03:12
Other snippets from this talk
Summary of the clip:
Why does perovskite tandem power conversion efficiency drop from 35% on one square centimeter to 15β20% at industrial scale?
The initial idea for the machinery was to coat perovskite materials used in solar cell production. Silicon-based solar cells face the fundamental Shockley-Queisser limit in power conversion. Coating silicon with a perovskite absorption layer, which has a wide band gap, can increase the PCE. The blue diagrams show progress over time, with tandem cells reported close to 35% efficiency.
The problem is that these devices are fabricated on a very small area, essentially one square centimeter. For larger scale or industrial scale, the power conversion efficiency is much lower, typically like 15 or 20%. Another diagram plots PCE as a function of active area. It includes different coating methods that can be used for perovskites: slot die, blade coating, evaporation, inkjet printing, et cetera.
The general tendency is that if you increase the coating area, the PCE typically decreases. Three bars in different colors are very important; they show the conversion to production scale. These bars sit alongside the methods that can be used for perovskites: slot die, blade coating, evaporation, inkjet printing, et cetera. This directly connects active area to production-scale conversion.
In this short video, you can learn:
* Tandem cells with perovskite on silicon have been reported close to 35% efficiency, but these devices are fabricated on about one square centimeter.
* At larger or industrial scale, perovskite power conversion efficiency is much lower, typically like 15 or 20%.
* PCE plotted as a function of active area shows that increasing coating area typically decreases efficiency across slot die, blade coating, evaporation and inkjet printing.
π **Clip Abstract** Perovskite coating can increase silicon solar cell PCE by adding a wide-band-gap absorption layer, with tandem reports near 35% on one square centimeter. Scaling to larger or industrial areas lowers PCE, typically to 15β20%, and PCE generally decreases as coating area increases across slot die, blade coating, evaporation and inkjet printing.
About the speaker:
* Speaker: Vladimir Popok
* Company: FOM Technologies
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#PerovskiteAbsorptionLayer, #SlotDieCoating, #InkjetPrinting, #PowerConversionEfficiency, #PerovskiteSolarCells, #TandemPhotovoltaics
This is a highlight of the presentation:
Production scale coating solution for the processing of large-area perovskite-based devices
More Highlights from the same talk.
06:16 - 08:20
How do you coat multiple wafers at once without them moving during the coating process?
How do you coat multiple wafers at once without them moving during the coating process?
A patent, registered about three years ago, covers coating a number of wafers simultaneously. Wafers sit on a conveyor with a supporting adhesive foil. That foil prevents them from moving under the coating process. They proceed to the coating unit, become coated, and afterward can be quenched and dried.
The concept was implemented within a European Horizon Project pilot line for production of perovskite silicon tandem modules, the PEPPERONI project. Stage one is wafer loading. Then wafers are sealed to the carrier foil, which is adhesive. Next comes coating, followed by quenching and drying. To take the foils back from the adhesive material, it must be deactivated.
Deactivation is done with UV light. On the right-hand side, a picture shows unloading the wafer, with blue light coming from the machine. The machine was built and its functionality tested successfully. After deactivation, the wafers can be transferred to the next production process.
In this short video, you can learn:
* An adhesive carrier foil holds multiple wafers in place during conveyor-based coating.
* Sealing, coating, quenching, drying and UV deactivation are sequential pilot-line stages.
* The pilot line targets perovskite silicon tandem modules and the machine passed functional testing.
π **Clip Abstract** A registered patent describes coating multiple wafers at once on a conveyor, using an adhesive foil to stop movement during coating. This concept became a pilot line for perovskite silicon tandem modules, with wafer loading, sealing, coating, quenching, drying, UV deactivation, and successful machine testing.
About the speaker:
* Speaker: Vladimir Popok
* Company: FOM Technologies
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#AdhesiveCarrierFoil, #UVDeactivation, #ConveyorCoatingUnit, #SuccessfulMachineTesting, #PerovskiteSolarCells, #TandemPhotovoltaics
About this talk
β Production scale coating solution for the processing of large-area perovskite-based devices Β· Vladimir Popok Β· TechBlick Innovations Festival July 2026


