top of page

Witold Nawrot

XTPL

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Witold Nawrot | XTPL: Why is the synergy between dispensing system and material so critical for XTPL's technology?

00:03:39 - 00:03:56

Other snippets from this talk

Summary of the clip:

Why is the synergy between dispensing system and material so critical for XTPL's technology?

The materials are the "heartbeat" of XTPL's technology, playing a crucial role in the overall performance and capabilities of the dispensing system. It is essential that the materials are well-suited and optimized for the specific dispensing system being used. This compatibility ensures that the materials can be dispensed accurately and reliably, achieving the desired feature sizes and resolutions.

XTPL places a strong emphasis on controlling both the dispensing system and the materials, recognizing that this synergy is key to unlocking the full potential of the technology. By developing and optimizing materials specifically for their dispensing systems, XTPL can achieve superior performance compared to using off-the-shelf materials. This control allows for fine-tuning of material properties to meet the specific demands of the dispensing process.

This synergistic approach enables XTPL to offer a complete and integrated solution, where the dispensing system and materials are designed to work together seamlessly. This results in improved process control, higher precision, and ultimately, better performance in printed electronics applications. The focus on material development and optimization is a key differentiator for XTPL, allowing them to push the boundaries of what is possible with additive manufacturing.

In this short video, you can learn:
* The importance of material compatibility with the dispensing system.
* How controlling both the system and materials leads to superior performance.
* The benefits of a synergistic approach in printed electronics.
📋 **Clip Abstract** This segment emphasizes the critical synergy between XTPL's dispensing system and its proprietary materials. It highlights the importance of controlling both aspects to achieve optimal performance and precision in printed electronics applications.
🔗 Link in comments 👇

#SystemMaterialSynergy, #ProprietaryMaterials, #PrecisionDispensing, #ProcessControl, #PrintedElectronics, #AdditiveManufacturing

This is a highlight of the presentation:

Additive Manufacturing for Next-Generation Microelectronics

The Future of Electronics RESHAPED 2025

​

22-23 October 2025

Estrel Congress Centre, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

02:09 - 04:21

How can dispensing achieve 1 µm features and spacing with high-viscosity materials and no overspray?

How can dispensing achieve 1 µm features and spacing with high-viscosity materials and no overspray?

Ultra-precise dispensing combines its own devices and own materials to reach one-micron features with one-micron spacing. Because the process uses highly viscous materials, there is no risk of overspray and therefore no short-circuit risk. The one-micron figure is repeatable under manufacturing conditions; in the lab the picture shows submicron capability, but one micron is what is guaranteed at production rate in real manufacturing scenarios.

The dispenser delivers one-micron features on any topography—steps, edges and wrap-arounds—and specializes in metallic connections while also working with non-metallic materials such as functional dielectrics. Dimensions can scale from one micron to five, 10, up to 50 or 100 microns and beyond. Printing micro dots demonstrates this: micron-diameter dots with single-micron positioning accuracy, shown as an image composed of dots.

That positioning accuracy enables real-life applications: micro bumps, high aspect-ratio pillars, filling microvials or vias in different substrates, and solder-paste dots. Without proper accuracy, the dot-composed image could not be produced. The same dispensing approach can address both fine metallic connections and larger dimensions, linking lab demonstrations to manufacturing-relevant structures.

In this short video, you can learn:
* One-micron features are repeatable in manufacturing, while submicron capability is shown only in the lab.
* Highly viscous materials eliminate overspray risk, removing a short-circuit pathway.
* Single-micron positioning accuracy underpins micro dots, micro bumps, high-aspect-ratio pillars, microvial/via filling and solder-paste dots.

📋 **Clip Abstract** Ultra-precise dispensing combines proprietary devices and materials to produce one-micron features and spacing with highly viscous materials, avoiding overspray and short-circuit risk. The process is repeatable at manufacturing rate, works on steps, edges and wrap-arounds, and supports metallic or functional dielectric materials from one micron to 50–100 microns and beyond.

About the speaker:
* Speaker: Witold Nawrot
* Company: XTPL
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#UltraPreciseDispensing, #HighViscosityMaterials, #SingleMicronAccuracy, #MicroViaFilling, #PrintedElectronics, #AdditiveElectronics

07:08 - 09:00

How do you repair opens on ultra-high-density organic substrates without creating shorts or visible profiles?

How do you repair opens on ultra-high-density organic substrates without creating shorts or visible profiles?

Open defect repair is a yield-management application: the aim is to repair every broken line or other feature on substrates, including flat panel displays and advanced packaging. As interconnects get denser and processes become stricter, yield becomes an important issue. It is also a sustainability matter, minimizing scrap for customers.

In advanced packaging, the example is repair on ultra-high-density interconnect PCB on organic substrate. This can decrease the number of X-outs, the circuits eliminated from the substrate. The repair can be used on any feature and any pitch—not only traces, but also pads and bumps—at very fine resolution.

Critically, there is no risk of overspray, so you do not risk creating a short circuit in place of the open defect. Profile matching is also performed: at low magnification, you would have a hard time noticing the repair. That is profile matching in practice.

In this short video, you can learn:
* Open defect repair targets every broken line or other feature across flat panel displays and advanced packaging.
* On ultra-high-density interconnect PCB on organic substrate, repair reduces X-outs and works on traces, pads and bumps at any pitch.
* No overspray avoids short circuits, and profile matching makes repairs hard to notice at low magnification.

📋 **Clip Abstract** Open defect repair addresses yield loss by repairing broken lines and features on flat panel displays and advanced packaging substrates, with scrap reduction as a sustainability driver. In ultra-high-density interconnect PCB on organic substrate, the approach reduces X-outs, repairs traces, pads and bumps at any pitch, avoids overspray shorts and uses profile matching for low-visibility repairs.

About the speaker:
* Speaker: Witold Nawrot
* Company: XTPL
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#OpenDefectRepair, #UltraHighDensityInterconnect, #ProfileMatching, #XOutReduction, #AdvancedPackaging, #PrintedElectronics

04:51 - 07:15

Can ultra-precise dispensing replace wire bonding for thinner HBM packages and 3D interconnects?

Can ultra-precise dispensing replace wire bonding for thinner HBM packages and 3D interconnects?

A micro-map of Wrocław, where every street is a one-micrometer line, compresses 16 by 16 kilometres into 16 by 16 millimetres — a million times smaller. It demonstrates printing any shape or path from a CAD design, which maps onto RDL prototyping. Ultra-precise dispensing works not only on flat surfaces but on 3D topographies, with the stated aim of outplacing wire bonding in some applications.

Fine pitch delivers a smaller footprint, and a thinner package follows because wire bonding must rise before it runs sideways, while dispensing goes straight to the side. That matters for memory, specifically high bandwidth memory interconnects. The process prints on vertical walls, steps and substrate edges, and the highest step printed so far is over one millimetre.

In the live process each interconnection is just one move — fairly quick and very repeatable. Wraparound interconnections extend the same capability, which matters when you need to route out of the area for vias, or when a substrate is not convenient for putting interconnects directly through it.

In this short video, you can learn:
* One-micrometer lines let a 16 by 16 kilometre area be reproduced as a 16 by 16 millimetre map, proving that any CAD path can be dispensed.
* Dispensing goes straight to the side instead of up and over, so fine-pitch interconnects cut both footprint and package thickness for high bandwidth memory.
* Interconnects print across vertical walls, steps over one millimetre high and substrate edges, including wraparound routes where through-substrate vias are impractical.

📋 **Clip Abstract** A micro-map of Wrocław drawn in one-micrometer lines shows that ultra-precise dispensing can follow any CAD path, flat or on 3D topography. Because each interconnect is a single, repeatable sideways move, the approach targets fine-pitch RDL prototyping and thinner high bandwidth memory packages as an alternative to wire bonding.

About the speaker:
* Speaker: Witold Nawrot
* Company: XTPL
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#UltraPreciseDispensing, #WraparoundInterconnects, #HighBandwidthMemory, #OneMicrometerLines, #PrintedElectronics, #AdvancedPackaging

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page