Yang Chen | Hangzhou Microquanta Semiconductor: How can a 14% efficient perovskite panel outproduce a 21% silicon panel by 30% in real-world field conditions?
07:48 - 08:55
Other snippets from this talk
Summary of the clip:
How can a 14% efficient perovskite panel outproduce a 21% silicon panel by 30% in real-world field conditions?
Standard testing conditions (STC) in the lab often mislead system planners because they do not account for dynamic outdoor variables like temperature fluctuations and changing spectral irradiance. In a year-long rooftop side-by-side study in Suzhou, China, 14% efficient perovskite modules were compared directly with 21% efficient silicon PERC modules using a normalized equivalent-full-hours metric to ensure a fair comparison.
The results revealed that the perovskite system generated 30% more energy per installed kilowatt than the silicon baseline, despite silicon having a much higher nominal efficiency. This outperformance peaked in warmer, sunny months, with the perovskite modules producing up to 32% more energy than silicon.
The material physics driving this massive yield advantage are twofold: perovskites possess a highly favorable (near-zero or positive) temperature coefficient compared to silicon, meaning their efficiency does not degrade as temperature rises, and they maintain an exceptionally strong photovoltaic response under low-light diffuse conditions.
In this short video, you can learn:
* Why nominal laboratory efficiency ratings fail to predict real-world energy yields of solar technologies.
* The details of a year-long field study comparing 14% perovskite modules with 21% silicon PERC modules.
* The specific physics of temperature coefficients and low-light responses that give perovskite a 30% energy-yield advantage.
📋 **Clip Abstract** This clip presents comparative field data from rooftop installations demonstrating that perovskite modules can generate up to 30% more energy per kilowatt than silicon. It attributes this real-world performance advantage to the superior temperature coefficients and low-light sensitivity of perovskite materials.
#PerovskiteModules, #TemperatureCoefficient, #SiliconPERC, #LowLightHarvesting, #ThinFilmSolar, #NextGenerationPV
This is a highlight of the presentation:
22-23 October 2025
Organised By:
More Highlights from the same talk.
04:07 - 05:01
Which efficiency split lets a semi-transparent perovskite top cell and a silicon bottom cell reach 26.63%?
Which efficiency split lets a semi-transparent perovskite top cell and a silicon bottom cell reach 26.63%?
The panel is a stack: a semi-transparent perovskite cell on top and silicon underneath. The efficiencies are reported separately — perovskite contributes 16.86%, silicon contributes 9.77% — and combined they give 26.63%. That split, with the perovskite carrying the larger share of the total, is the headline number for the stacked architecture rather than a single-junction result.
The motivation is spectral: sunlight covers a very broad spectrum, and no single material can utilize all of it. That is why the industry arrived at the tandem idea decades ago — split the spectrum between two absorbers instead of asking one junction to carry the whole range.
Perovskite became the promising partner for silicon in that pairing. Perovskite takes over the higher potentials, while silicon takes over the longer-wavelength energies. The two absorbers are therefore assigned different parts of the incident spectrum rather than competing for the same photons.
In this short video, you can learn:
* Perovskite contributes 16.86% and silicon 9.77%, summing to 26.63% in the stacked panel.
* A tandem is used because the solar spectrum is too broad for one single material to utilize fully.
* Perovskite takes over the higher potentials while silicon handles the longer-wavelength energies.
📋 **Clip Abstract** The stacked panel pairs a semi-transparent perovskite top cell with a silicon bottom cell, perovskite contributing 16.86% and silicon 9.77% for 26.63% combined. The rationale is spectral coverage: no single material spans the full solar spectrum, so perovskite absorbs the higher-potential portion and silicon the longer wavelengths.
About the speaker:
* Speaker: Yang Chen
* Company: Microquanta
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#SemiTransparentPerovskite, #PerovskiteSiliconTandem, #FourTerminalTandem, #SpectrumSplitting, #PerovskitePV, #SolarCells
08:32 - 10:04
How does four-terminal tandem compare on annual energy yield and LCOE against two-terminal?
How does four-terminal tandem compare on annual energy yield and LCOE against two-terminal?
A model compared three cities using their spectrum data across the whole year, including albedo factors. In that annual analysis, the four-terminal architecture delivered a slightly better energy yield than the two-terminal design throughout the year. The comparison uses city-specific spectra and albedo over the full annual cycle.
On LCOE, the chart shows that with a larger degradation rate, the four-terminal approach makes somewhat better sense for energy cost. If degradation reaches 0.4% and even lower, the two-terminal approach behaves much better. The LCOE result is therefore tied to the degradation rate rather than only the annual energy yield.
The stated view is that two-terminal has a better future and is a perfect solution, but for now, for practical purposes, four-terminal is the product that can be provided to the market. The discussion extends to space solar, where work has been done since as early as 2020.
In this short video, you can learn:
* Across three cities and a full year including albedo, four-terminal tandem gave slightly higher energy yield than two-terminal.
* At larger degradation rates, four-terminal made better LCOE sense, while at 0.4% and lower two-terminal behaved much better.
* The practical market product is four-terminal now, while two-terminal is seen as the better long-term solution; space solar work dates to 2020.
📋 **Clip Abstract** A full-year, three-city spectrum and albedo model found four-terminal tandem slightly ahead of two-terminal on energy yield. LCOE depends on degradation: four-terminal makes more sense at larger degradation rates, but at 0.4% and below two-terminal behaves much better, so four-terminal is the near-term market product while two-terminal is seen as the better future solution.
About the speaker:
* Speaker: Yang Chen
* Company: Microquanta
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FourTerminalTandem, #AnnualEnergyYield, #LCOEDegradationRate, #SpectralAlbedoModel, #PerovskiteTandem, #SpaceSolarPhotovoltaics
05:01 - 06:19
Why choose a four-terminal tandem when the two-terminal design is more elegant and compact?
Why choose a four-terminal tandem when the two-terminal design is more elegant and compact?
Perovskite can take over for the higher potentials while silicon takes over for the longer-wavelength energies, which is the division of labour behind the tandem stack. The architecture choice then turns on wiring: the four-terminal is electrically connected in parallel, the two-terminal is electrically connected in series. That single difference, not elegance, drives the practical case.
The speaker concedes the two-terminal is a very elegant and compact design and says he very much agrees with Adam from QPPV on the practical side. But at this stage the four-terminal is fairly easy to manufacture, a decisive advantage given the circumstance that perovskite is advancing and scaling every day.
The commercial logic follows directly. A four-terminal node does not ask the entire industry or supply chain to adopt the new technology, which makes it easier to introduce that technology to the market. The speaker presents this as what the four-terminal technology node delivers at this stage, as perovskite scaling continues.
In this short video, you can learn:
* Four-terminal tandems are electrically connected in parallel, while two-terminal tandems are electrically connected in series.
* Perovskite takes over for the higher potentials and silicon takes over for the longer-wavelength energies.
* Two-terminal is called elegant and compact, but four-terminal is fairly easy to manufacture now and avoids asking the whole supply chain to adopt the new technology.
📋 **Clip Abstract** The clip weighs two-terminal against four-terminal perovskite-silicon tandem architectures, noting that the four-terminal version is wired in parallel and the two-terminal in series. Although the two-terminal design is described as elegant and compact, four-terminal is presented as easy to manufacture today and simpler to introduce to a market without wholesale supply-chain change.
About the speaker:
* Speaker: Yang Chen
* Company: Microquanta
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FourTerminalTandem, #PerovskiteSiliconTandem, #ParallelInterconnection, #TandemManufacturability, #PerovskitePhotovoltaics, #TandemSolarCells
Other talks by Yang Chen
- Outlook for Four-Terminal Perovskite Tandem Technology · Perovskite Connect 2026
- Advancing Perovskite BIPV and Real-World Deployments · Perovskites Innovation Day 2025
- · The Future of Electronics RESHAPED 2025
More highlights from Yang Chen
- ▶ Which efficiency split lets a semi-transparent perovskite top cell and a silicon bottom cell reach 26.63%? · Perovskite Connect 2026 | Berlin
- ▶ Why choose a four-terminal tandem when the two-terminal design is more elegant and compact? · Perovskite Connect 2026 | Berlin
- ▶ How does four-terminal tandem compare on annual energy yield and LCOE against two-terminal? · Perovskite Connect 2026 | Berlin
- ▶ Does a 9% silicon bottom cell undermine the business case for adding a perovskite boost layer? · Perovskite Connect 2026 | Berlin
- ▶ Why does a 27% efficient perovskite cell fail when scaled up, and how do we fix it? · Berlin 2025
- ▶ Why is vacuum-flash drying secretly destroying your perovskite module's long-term UV stability? · Berlin 2025
