Zahir Alpaslan | GlobalFounderies: How much cost can a foundry remove by collapsing the microLED display supply chain?
06:05 - 07:50
Other snippets from this talk
Summary of the clip:
How much cost can a foundry remove by collapsing the microLED display supply chain?
The clip contrasts two foundry business models with an a la carte route. In the fragmented route, an LED is designed, the substrate is put together and the LED is fabricated in a fab to create the front plane. CMOS is designed and fabricated separately, a back plane is created and packaged, and integration happens in a different place. Each step adds margin before the display maker, light engine, OEM and consumer.
With foundry involvement, the foundry can fabricate the CMOS, which it already does, fabricate the microLED front plane and put them together. Under that model, the supply chain collapses significantly, and the additional margins reduce significantly. This margin reduction is presented separately from yield and scale benefits, so foundry involvement is argued to lower cost even before those manufacturing improvements are counted.
The result is a supply-chain argument for foundry manufacturing of microLED microdisplays: fabrication of CMOS and the microLED front plane, plus integration, replaces a sequence that otherwise runs through separate design, fabrication, packaging, display maker, light engine and OEM stages. The clip notes additional benefits from scale and yield improvements when the foundry is involved, but its first claim is that collapsing the chain reduces the additional margins.
In this short video, you can learn:
* In the a la carte model, LED front-plane fabrication, CMOS back-plane fabrication, packaging and integration occur at separate steps, each adding margin.
* Foundry involvement combines CMOS fabrication, microLED front-plane fabrication and integration, collapsing the supply chain significantly.
* The clip separates margin reduction from scale and yield benefits, arguing cost falls even before those foundry advantages are counted.
📋 **Clip Abstract** A fragmented microLED microdisplay supply chain adds margin at LED design, substrate assembly, front-plane fabrication, CMOS design and fabrication, back-plane packaging, integration, display packaging, light-engine assembly and OEM glasses assembly. Foundry involvement can fabricate CMOS and the microLED front plane and integrate them, collapsing the chain and reducing additional margins before scale and yield benefits are counted.
About the speaker:
* Speaker: Zahir Alpaslan
* Company: GlobalFounderies
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands
Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/
#MicroLEDFrontPlane, #CMOSBackPlane, #FoundryIntegration, #SupplyChainCollapse, #MicroLEDMicrodisplays, #AugmentedReality
This is a highlight of the presentation:
Addressing Manufacturing Challenges in MicroLED Microdisplays for Augmented Reality
More Highlights from the same talk.
03:20 - 05:32
If ALCO is good enough on brightness, color and form factor, what must microLED prove to justify its AR market?
If ALCO is good enough on brightness, color and form factor, what must microLED prove to justify its AR market?
The clip frames AR glasses as a system-architecture contest: the incumbent 'ALCO' is already described as good enough on brightness, color and form factor, so microLED cannot win by being merely different. The speaker notes 51% of all AR glasses are made with micro, yet technology alone is insufficient. Device cost, application usability and a clear advantage over existing approaches must all be addressed for success.
The speaker calls for applications for microLED that can be easily addressed by ALCO or Micro, but deliberately does not name them; he says the audience must identify the application and come to him to manufacture it. He also insists the choice must make financial sense for everyone involved, not just demonstrate the best technical result.
Consumer payment is the final filter. The speaker says $5,000 glasses probably will not be paid for, but $200–$300 glasses with microLED that ALCO or microLED cannot do might be. He warns that if nobody is paying a few years later, you will be doing something else, and the first product does not have to use the best technology at the beginning.
In this short video, you can learn:
* MicroLED must beat incumbent 'ALCO' on more than brightness, color and form factor because good-enough alternatives already exist.
* The speaker says 51% of AR glasses use micro, but device cost, application usability and financial sense still determine adoption.
* A $200–$300 microLED product that does what ALCO or Micro cannot may be paid for, even if it is not the best technology at first.
📋 **Clip Abstract** MicroLED microdisplays for AR must justify themselves against an incumbent described as good enough on brightness, color and form factor, with 51% of AR glasses already using micro. The clip argues that device cost, application usability, a clear application and consumer willingness to pay—tested at $200–$300 versus $5,000—matter as much as technical superiority.
About the speaker:
* Speaker: Zahir Alpaslan
* Company: GlobalFounderies
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands
Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/
#MicroLEDARGlasses, #SystemArchitectureTradeoffs, #DeviceCostUsability, #HolographicDisplays, #AugmentedRealityDisplays, #MicroLEDManufacturing
10:33 - 12:15
Why replace TFT backplanes with micro-ICs for microLED AR displays?
Why replace TFT backplanes with micro-ICs for microLED AR displays?
TFT backplanes such as LTPS and LTPO look attractive because the structures and fabs already exist, making them an easy demonstrator route. But the speaker questions whether that is the best possible way of using microLED — whether the emitter can actually be driven to its hardest, best level to show its benefits. Pixel processing and micro-IC creation, he notes, can both still be done in a foundry.
For transparent displays, putting micro-ICs right next to the pixels might be a much better way of doing it. You don't have to carry those huge TFT transistors, and a small micro-IC sitting next to each pixel can perhaps deliver a much more transparent display. It is a different way of asking what microLEDs are actually best at.
Moving from the TFT transistor model to the micro-IC model changes the architecture. Instead of reusing existing driver ICs, you have to create new ones, because there is no longer a need to drive 30 volts to switch a TFT: just send five volts and drive the microLED as fast as you want. TFT speed stalls around 120, 240, even 480 hertz; microLED switching reaches nanoseconds.
In this short video, you can learn:
* LTPS and LTPO backplanes are an easy demonstrator route because the fabs exist, but they may not drive microLEDs to their best possible level.
* A small micro-IC beside each pixel removes the need for huge TFT transistors, which can make the display much more transparent.
* Dropping the 30-volt TFT drive for a five-volt micro-IC removes the roughly 120 to 480 hertz speed ceiling and opens nanosecond switching.
📋 **Clip Abstract** LTPS and LTPO backplanes already exist and are easy to demo, but they may cap what microLEDs can do. Micro-ICs beside each pixel promise more transparent displays, new five-volt driver ICs instead of 30-volt TFT drive, and nanosecond switching beyond the 120 to 480 hertz TFT ceiling.
About the speaker:
* Speaker: Zahir Alpaslan
* Company: GlobalFounderies
* Event: MicroLED Connect 2024
* Location: High Tech Campus, Eindhoven, Netherlands
Join the most event MicroLED, AR/VR display and Optical I/O Connect event of the year
Learn more https://www.microledconnect.com/
#MicroICPixelDriver, #LTPSBackplane, #TransparentDisplayPixels, #FiveVoltDriverIC, #MicroLEDDisplays, #ARMicrodisplays
About this talk
→ Addressing Manufacturing Challenges in MicroLED Microdisplays for Augmented Reality · Zahir Alpaslan · MicroLED Connect 2024
