EcoPCBs on Wood: Sustainable Printed Electronics on Wood
Sustainable Electronics RESHAPED 2026 Berlin
22 October 2026
Berlin, Germany
Estrel Berlin Hotel & Convention Center:
Sonnenallee 225, 12057 Berlin
In the EU-funded HyPELignum project, wood and wood-based materials are investigated as a substrate for printed electronics. Among the key outcomes of this project are PCBs (Printed Circuit Boards) based on wood (ecoPCBs). Conductive paths are printed onto the wood substrate, using either inkjet or screen-printing technologies. The main idea of the plywood ecoPCB is to print the desired circuitry in each veneer layer of the plywood before gluing them together. The different layers are connected using vias, thus mimicking the structure of a conventional multilayer PCB. Waterborne primers are used to homogenize the penetration behavior and fill out pores of the birch wood used for this purpose. The technology of screen-printing is also investigated for its application in timber construction (moisture and strain sensing) and in furniture (touch sensing, VOC measurements using a novel biomimetic smell sensors).
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


