Exploring Printed Electronics Applications of a Piezoelectric Bend‑Mode Inkjet Printhead for High‑Viscosity Inks
The Future of Electronics RESHAPED 2026 Berlin
22 October 2026
Berlin, Germany
Estrel Berlin Hotel & Convention Center:
Sonnenallee 225, 12057 Berlin
Inkjet technology has recently attracted increasing attention as a promising alternative to conventional manufacturing processes across a variety of industrial fields, including printed electronics. For functional materials such as conductive, insulating, and structural inks, the presence of dispersed particles as well as binder and polymer components often leads to higher viscosity and non‑Newtonian behavior, resulting in a broader diversity of ink rheology and more stringent jetting requirements.
In response to these material trends and technical demands, a piezoelectric bend‑mode inkjet printhead architecture has been developed to enable stable ejection of high‑viscosity inks while maintaining key advantages such as high resolution and high nozzle density. By combining a high‑output actuator design based on piezoelectric ceramics with an optimized internal flow‑path design, stable ejection of the required droplet volume from a large number of nozzles has been confirmed even under high driving‑frequency operation.
In an initial evaluation, a non‑Newtonian ink exhibiting a viscosity exceeding 50 mPa·s at a shear rate of 1000 s⁻¹ was successfully jetted at room temperature, suggesting that bend‑mode piezoelectric actuation is effective for high‑viscosity functional materials. Future work will further investigate the applicability to printed electronics and clarify the feasible operating window and effective conditions.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.


