top of page

Gregory Berube

Director of Innovations Americas

Heraeus

​

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

New PTC Printed Carbon Resistor Pastes for Self-regulating Heaters

Innovations Festival: Printed, Flexible, Hybrid, 3D, Wearable, & Textile Electronics 2023

​

22 June 2023

Online

TechBlick Platform

For decades, polymer thick-film (PTF) systems have provided a low-cost option for screen-printing simple electronic circuits, especially on temperature sensitive substrates. The ability to apply PTF pastes on a wide variety of substrates has facilitated numerous applications, for instance membrane touch-switch keypads, buss bars for touch screens, various types of sensors, and flexible circuitry. PTF is also commonly used in the rapidly emerging Printed Electronic market, where flexible, stretchable, durable materials are paramount to the success of these technologies. These pastes include silver pastes for conductors, carbon pastes for resistive applications, shielding and biosensors; silver-silver chloride pastes for glucose and other biosensors, and dielectric pastes.


Carbon based PTF resistors are a low cost and easily scalable option for low temperature polymer-based heaters, especially since they may be printed on any type of surface. However, PTF heaters normally require complex control circuitry that add to the cost of the heater. Without these controls, the heater may overheat, resulting in injury or a fire. These types of risks are especially unacceptable in automotive applications, where occupant safety is paramount. However, it is possible to design a carbon paste that will print a resistor with the ability to self-regulate by dramatically increasing in resistance at and above the target operating temperature. This effect is called “positive temperature coefficient (of resistance),” or the PTC effect. Elimination of the control circuitry in PTC heaters results in lower cost and fewer potential failure modes.

In our presentation, we will demonstrate a new line of self-regulating carbon resistor pastes that have target operating temperatures at approximately 60, 80, and 100oC. We will describe how the pastes are formulated, printed, and cured into a resistive trace. We will demonstrate how the sheet resistance can be tailored with blending allowing for more circuit design flexibility. Finally, we present data that will show the PTC effect and that the heater is self-regulating at the desired temperature while being robust against possible runaway conditions. These properties make the PTC heaters especially appropriate for in-cabin passenger comfort and other automotive low temperature heating applications.

Watch the 5-minute excerpt from the talk

Video highlights and other talks by this speaker appear here.

More presentations from
Heraeus

Electronics RESHAPED USA 2026

10 June 2026

Ag Inks for Stretchable Electronics

Sai Vijayaraghavan

Computer History Museum:
1401 N. Shoreline Blvd.
Mountain View, CA 94043

Mountain View, California

Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025

10 December 2025

How altering drying properties affects conductive ink performance

Jessica Waite

TechBlick Platform

Online

The Future of Electronics RESHAPED 2025

22 October 2025

Bridging the Gap Between Additive and Subtractive Technologies: the Solderable Polymer Revolution.

Ryan Banfield

Estrel

Berlin, Germany

Perovskites Innovation Day 2025

3 April 2025

Optimizing Design Principles for PTC Heater Circuits

Zach Kelly

TechBlick Platform

Online

Printed Electronics Innovation Day | Winter 2024

10 December 2024

Fully Established Turnkey Solution for Selective Inkjet Printing in Semiconductor Mass Production

Urs Neudecker

TechBlick Platform

Online

The Future of Electronics RESHAPED 2024 USA

11 June 2024

Functional electronic inks as an enabler for the latest advancements in healthcare

Ryan Banfield

UMass Boston

Boston, USA

The Future of Electronics RESHAPED | Berlin 2023

17 October 2023

Redefining Coatings in Electronic Packaging: Turnkey Digital Production Process for Selective Metallic Coating

Franz Vollman

Estrel

Berlin, Germany

The Future of Electronics RESHAPED 2022

12 October 2022

Selective inkjet printing of particle-free conductive metal ink in large scale production

Franz Vollmann

High Tech Campus, Conference Centre

Eindhoven, Netherlands

Printed, Flexible, Hybrid, & InMold Electronics 2021

9 March 2021

Conformal EMI Shielding - Heraeus Intergrated Solution Platform

Franz Vollman

TechBlick Platform

Online

The TechBlick Platform: Why Join?

Onsite Admission

With your Hybrid Individual or Group Pass, you can attend one or more of our world-class conferences and exhibitions around the world, including Electronics RESHAPED USA or Europe, MicroLED Connect, AR/VR Connect, Perovskite Connect, Sustainable Electronics RESHAPED, and more…

CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page