Sustainability-to-Scalability in FHE: Screening LCA Insights and AI/ML-Enabled Manufacturing
Wearables RESHAPED USA 2026
10 June 2026
Mountain View, California
Computer History Museum:
1401 N. Shoreline Blvd.
Mountain View, CA 94043
Flexible hybrid electronics (FHE) can enable scalable, high-yield production while supporting environmentally sustainable manufacturing. This talk presents a screening life cycle assessment (LCA) comparing conventional flex circuitry with additively manufactured (printed) flex and outlines an AI/ML-enabled path to faster qualification and scale-up. The screening LCA indicates printed flex can deliver 33–71% lower impacts across manufacturing stages and 45–80% lower impacts during circuitry fabrication than conventional flex. Conventional flex is dominated by energy-intensive processing (laser use, UV exposure, thermal curing), while printed flex is dominated by materials impacts, especially silver-based inks and conductive adhesives. Improvement scenarios show that switching to copper-based ink reduces impacts by up to 38%, and low-temperature solder pastes have ~85% lower impacts than silver-based conductive adhesives while improving assembly control. Results are demonstrated using a printed vital sign monitoring (VSM) patch with high-resolution lines and filled vias comparable in footprint to conventional flex. AI/ML will further accelerate adoption via application-specific design rules, process-window optimization, and in-line defect detection with closed-loop feedback to boost yield and shorten cycles.
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.




