top of page

Pradeep Lall

Macfarlane Endowed Distinguished Professor, Director, Cave3, Nextflex Technical-governing Council

Auburn University

​

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Additively Printed In-Mold Electronics Circuits and Sensors for Automotive

The Future of Electronics RESHAPED 2025

​

23 October 2025

Berlin, Germany

Estrel

Wire harnesses account for a significant portion of the vehicle's weight. The integration of advanced driver assistance systems into automotive platforms has seen the emergence of a number of safety features, including lane departure warning, driver alertness monitoring, cross- traffic alert, guidance, navigation, and control. Touch surfaces in the automotive platform are presently used for little more than aesthetic appeal. However, the integration of human-machine
interfaces on the touch surfaces requires additively printed in-mold electronics. The processes for the printing of sensors, in addition to the integration of surface mount electronics for signal processing, are not yet known for additively printed conformal electronics. The proliferation of advanced driver assistance systems (ADAS) has contributed to the rise in cabling on the automotive platform to connect numerous sensors and surfaces to control units. Modern cars have thousands of wires that can total several kilometers in length, and the wire harnesses in some models can weigh as much as 36 kg. This increase in weight has become problematic for automakers, particularly given stricter CO 2 emission standards. There is now a strong interest in developing lighter and cheaper wire harnesses to reduce the carbon footprint of cars. However, conventional wire harnesses possess design limitations that necessitate the use of connectors and receptacles to integrate them into the automobile's body and link them to the control units. 3D printed in-mold electronics (IME) is a cutting-edge technology that is gaining traction in the electronics industry owing to its ability to minimize wire harnesses and carbon footprint. In this paper, a number of additive print processes have been studied for their process-performance interactions in thermo-formed in-mold electronics. Specifically, printed circuits with surface-mounted components have been explored with direct write printing and gravure offset printing. There are several substrates which are compatible with the thermoforming process required for the creation of in-mold-electronics such as polyethylene terephthalate glycol (PETG), polycarbonate (PC), high impact polystyrene (HIPS). Applications examined include signal processing and electrodermal sensors for the measurement of the galvanic skin response. Electrodermal sensors measure the surface conductance of the skin to determine the state of the autonomic nervous system. These wearables could acquire biosignals with high accuracy, which makes them beneficial in scenarios like assessing a driver's emotional and medical condition during various driving scenarios. Components have been attached using electrically conductive adhesives, low-temperature solders, and ultra-low-temperature solders. Signal process performance has been demonstrated through the fabrication and characterization of AC-DC converters. Performance parity has been assessed through comparison of the thermoformed circuits with conventional rigid circuits with identical design. Impact of variables including print speed, print pressure, nozzle temperatures, platen temperatures, sintering temperature, sintering time, reflow profile or curing profile on the realized circuit performance has been assessed. For the electrodermal sensors, the in-mold sensor response has been compared with that of the medical grade sensor to demonstrate the sensor accuracy, repeatability, sensitivity, and long-term stability.

Biography:
Pradeep Lall is the MacFarlane Endowed Distinguished Professor and Alumni Professor with the Department of Mechanical Engineering and Director of the Auburn University Electronics Packaging Research Institute. He holds a Joint Courtesy Appointment in the Department of Electrical and Computer Engineering. He is a member of the technical council and academic co-
lead of automotive and asset monitoring TWGs of NextFlex Manufacturing Institute. Prior to joining Auburn University, Dr. Lall worked for Motorola, focusing on various aspects of wireless communications products. He is the author and co-author of 2-books, 15 book chapters, and over 1000 journal and conference papers in the field of electronics reliability, manufacturing, and survivability. He holds three U.S. Patents, Three-Motorola Outstanding Innovation Awards, and Five-Motorola Engineering Awards. His publications have garnered over 13,000 citations, an H- index of 53, and an i10-index of 317. Dr. Lall is ranked in the highest quantile amongst the top 2
percent of Scientific Researchers worldwide, based on data compiled by Stanford University. The ranking system includes scientists in 20 fields and 174 sub-fields. On ranking by field and sub-field, based on career publications, Dr. Lall is ranked in the top 0.3 percent out of 143,311 scientists in the subfield of mechanical engineering & transportation. Dr. Lall is a fellow of the ASME, a fellow of the IEEE, a fellow of the NextFlex National Manufacturing Institute, and a
fellow of the Alabama Academy of Science. He is the recipient of the SMTA Founder’s Award in 2024 for exceptional contributions to Electronics Manufacturing, SEMI R&D Achievements Award for landmark contributions to Additive Manufactured Electronics in 2023, ASME Avram Bar-Cohen Memorial Medal in 2022, IEEE Biedenbach Outstanding Engineering Educator
Award in 2020, Auburn University Research Advisory Board’s Advancement of Research and Scholarship Achievement Award in 2018, IEEE Sustained Outstanding Technical Contributions Award in 2018, NSF’s Alex Schwarzkopf Award for Technology Innovation in 2016, Alabama Academy of Science Wright A, Gardner Award in 2016, IEEE Exceptional Technical Achievement Award in 2014, ASME-EPPD Applied Mechanics Award in 2013, SMTA’s
Member of Technical Distinction Award in 2013, Auburn University’s Creative Research and Scholarship Award in 2013, SEC Faculty Achievement Award in 2013, Samuel Ginn College of Engineering Senior Faculty Research Award in 2007 and 2016, and over Fifty Best-Paper Awards at national and international conferences. Dr. Lall has served in several distinguished roles at the national and international level including serving as a member of the National Academies Committee on Electronic Vehicle Controls, IEEE Electronics Packaging Society Board-of-Governors, Member of the IEEE Reliability Society AdCom, IEEE Electronics Packaging Society Representative on the IEEE-USA Artificial Intelligence Policy Committee, IEEE Reliability Society Representative on the IEEE-USA Government Relations Council for R&D Policy, Chair of Congress Steering Committee for the ASME Congress, Member of the technical committee of the European Simulation Conference EuroSIME, Associate Editor for the IEEE Access Journal, and Associate Editor for the IEEE Transactions on Components and Packaging Technologies. Dr. Lall is the founding faculty advisor for the SMTA student chapter at Auburn University and a member of the editorial advisory board for SMTA Journal. He received the M.S. and Ph.D. degrees in Mechanical Engineering from the University of Maryland and the M.B.A. from Northwestern University.

Watch the 5-minute excerpt from the talk

Read the summary

How does the technology maturation process bridge the gap between fundamental research and practical application in automotive systems?

00:00:27 - 00:00:44

Read the summary

How do direct-write printing parameters, such as pressure and speed, influence the electrical resistance of printed circuits, and what is the optimal balance for achieving desired performance?

00:06:37 - 00:06:50

Read the summary

What is the potential impact of flexible electronics on reducing vehicle weight, and how does this translate into value for the automotive industry?

00:01:10 - 00:01:38

Video highlights and other talks by this speaker appear here.

More presentations from
Auburn University

The TechBlick Platform: Why Join?

Onsite Admission

With your Hybrid Individual or Group Pass, you can attend one or more of our world-class conferences and exhibitions around the world, including Electronics RESHAPED USA or Europe, MicroLED Connect, AR/VR Connect, Perovskite Connect, Sustainable Electronics RESHAPED, and more…

CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page