Chip-first active-matrix micro LED displays using low temperature OTFT backplanes
Mini- & Micro-LED Displays: Markets, Manufacturing Innovations, Applications, Promising Start-ups 2023
29 November 2023
Online
TechBlick Platform
Micro-LED technology provides a route to high brightness, high contrast, low power consumption displays with a superior lifetime to OLED. Deposition and patterning of the LEDs is performed separately from the active-matrix backplane, unlike in OLED, therefore joining of the LEDs and TFTs must be achieved, sometimes with millions of devices to generate the final display. Mass-transfer techniques have therefore been the subject of intense R&D work in the past few years. In this paper we present a mass-transfer-free approach where an organic thin-film-transistor (OTFT) backplane can be deposited and patterned on top of the source wafer using low temperature processing. Such an approach can yield high resolution and high brightness displays with good uniformity and stability due to the OSC materials in the device. Effective planarization of the LED wafer is achieved using a specially designed UV cross-linkable organic polymer. This allows an OTFT device to be solution processed on top of the LED, achieving charge mobilities of 2 cm2/Vs at channel lengths of 3.7um with on/off ratios of >108. Displays with pixel spacings of 1mm, 300um and 100um were demonstrated in arrays of 16x16 and 48x48, with brightness of over 100K nits for the 254ppi version. Ultimate brightness of 200K nits was achieved with the larger pixel size and optimized designs show potential for >500K nits soon. This approach to processing monolithic micro-LED displays can be used with source wafers (for small sized displays), but also could be applied to LEDs on a transfer sheet (where LEDs have been removed from the sapphire onto an intermediate substrate, with the pitch adjusted for the final display format). Processing on the wafer is perhaps suited for very high ppi AR/VR displays at >1000ppi. In the second case, the usage of the micro-LED is much more efficient and hence this could permit a much wider range of displays to be made with good yield and performance. It does require a mass transfer from the source wafer to an intermediate substrate, but the yield of this transfer can be higher than for the final transfer from transfer sheet to backplane since the metal pads must be joined in a eutectic bond. In our scheme, the metallization is formed in the same way as a conventional via process (coating a metal on another metal) and therefore it is a much more established process with high yield
Watch the 5-minute excerpt from the talk
Video highlights and other talks by this speaker appear here.




