top of page

Adam Lorenz

CubicPV

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Adam Lorenz | CubicPV: How does Arrhenius-based acceleration physics accurately map a 1,000-hour laboratory test to a 30-year outdoor solar lifetime?

00:06:50 - 00:09:00

Other snippets from this talk

Summary of the clip:

How does Arrhenius-based acceleration physics accurately map a 1,000-hour laboratory test to a 30-year outdoor solar lifetime?

Perovskite degradation mechanisms are primarily thermally activated, meaning they strictly follow Arrhenius behavior where the reaction rates depend exponentially on temperature. By measuring the time it takes for a cell to degrade to 90% of its initial performance across varying temperatures, researchers can determine the material's specific activation energy (Ea). Literature values for these activation energies typically range from 0.5 eV to 1.0 eV, dictating the slope of the degradation rate over temperature.

To translate these laboratory parameters into real-world lifetimes, engineers map the accelerated aging data against geographical solar exposure models. For instance, in an aggressive climate with five hours of direct sunlight per day, a module accumulates roughly 1,826 hours of direct solar exposure annually. Over a 30-year target lifetime, this equates to roughly 50,000 hours of real-world exposure, a duration that is impossible to test sequentially during product development cycles.

By leveraging Arrhenius relationships, developers can compress this 50,000-hour requirement into much shorter testing windows by elevating the stress temperature. A thousand-hour test conducted at 90°C can effectively simulate decades of wear in moderate climates, though extremely hot desert environments where module temperatures routinely exceed 70°C present a significantly higher degradation bar that requires even more robust molecular engineering.

In this short video, you can learn:
* The role of Arrhenius activation energy in modeling the thermal degradation of perovskite materials.
* How localized climate profiles and solar exposure hours are mathematically converted into laboratory testing targets.
* The engineering significance of high-temperature testing at 90°C for predicting long-term reliability in desert versus temperate climates.

📋 **Clip Abstract** Adam Lorenz explains the mathematical framework of using Arrhenius equations to relate accelerated thermal aging to real-world solar module lifetimes. He details how degradation slopes and activation energies allow developers to compress a 30-year climate exposure profile into practical lab testing intervals.

#ArrheniusModeling, #PerovskiteDegradation, #AcceleratedThermalAging, #ActivationEnergy, #PerovskitePhotovoltaics, #SolarReliabilityTesting

This is a highlight of the presentation:

Enabling Durable Perovskite Tandems with Scalable Architecture and Manufacturing Methods

Perovskite Connect 2025

​

22-23 October 2025

Estrel Congress Centre, Berlin (Co-located with TechBlick's Future of Electronics RESHAPED show)

Organised By:

TechBlick

Perovskite-Info.com

More Highlights from the same talk.

05:22 - 07:52

Does a 2% Jsc drop over three months prove perovskite degradation — or just seasonal spectral shift?

Does a 2% Jsc drop over three months prove perovskite degradation — or just seasonal spectral shift?

Field data from a 400 mm module on a Massachusetts rooftop is plotted using daily efficiency — a metric developed by PAX in Colorado and Sandia National Labs in New Mexico. You add up the kilowatt hours generated across the day, measure irradiance with a pyranometer, and average the day's performance, so odd morning behaviour shows up. The colour bar separates sunny from cloudy days; the lower trace is peak module temperature.

At a Southeast Asian site module temperatures exceed 70 °C, and a full year of that performance was demonstrated with less than 1% degradation. The acceleration factor for perovskites between a very hot climate and a more modest one — or Berlin — can be more than 10X. So when someone quotes a degradation rate, ask which environment it corresponds to.

Jsc typically doesn't change much for perovskites, yet over three months this module showed a 2% drop — entirely due to spectral change, with fewer photons in the portion of the spectrum the perovskite absorbs. The AM1.5 spectrum shifts significantly between January and July: counting photons hitting perovskite versus silicon, physics alone gives a five to 10% current change, and summer to fall yields about 2% in Jsc.

In this short video, you can learn:
* A year at module temperatures above 70 °C in Southeast Asia produced less than 1% degradation, but the perovskite acceleration factor versus a modest climate such as Berlin can exceed 10X.
* Daily efficiency, used by PAX and Sandia, integrates the whole day's kWh against pyranometer irradiance so that anomalous morning behaviour is captured.
* The 2% Jsc drop over three months traced entirely to AM1.5 spectral shift, not to cell degradation.

📋 **Clip Abstract** Field data from a 400 mm rooftop module in Massachusetts shows how daily efficiency, peak module temperature and irradiance separate sunny from cloudy days. A Southeast Asian site above 70 °C delivered under 1% degradation over a year, while a 2% Jsc loss over three months traced entirely to seasonal AM1.5 spectral shift.

About the speaker:
* Speaker: Adam Lorenz
* Company: CubicPV
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#DailyEfficiencyMetric, #AM15SpectralShift, #JscSpectralLoss, #ModuleTemperatureAcceleration, #PerovskiteStability, #EnergyYieldAnalysis

11:40 - 14:06

How can accelerated light-dark cycling identify ion migration issues and drive perovskite stack improvements?

How can accelerated light-dark cycling identify ion migration issues and drive perovskite stack improvements?

The test compares two stacks over 120 hours of degradation, with a zoom on 100–105 hours. Instead of 12 hours on and 12 hours off, light cycling is accelerated at 90°C: a couple of hours at sunlight, then dark annealing or dark soaking for about half an hour, equivalent to a full night at lower temperature. Every light-off event produces a voltage drop as ions move inside the material.

A stack change was made to mitigate that ion-driven response. Looking only at the top line of the two stacks shows very little difference, but more sophisticated analysis reveals behavior inside the device. Data gaps every 15 cycles mark temperature drops and room-temperature re-measurement, where voltage drops significantly from charge barriers building up at the interface—effects that can influence daily outdoor performance.

Outdoor module data use time of day on the x-axis: as modules spend longer in the field, temperatures change and a daily wake-up performance appears. Implementing the changed stack in the field maintains higher voltage throughout the day, including early morning. With irradiance on the x-axis, the same stacks show higher voltage and higher fill factor under lower irradiance over a few months.

In this short video, you can learn:
* Accelerated light-dark cycling at 90°C uses short dark soaking to emulate a full night and exposes ion-driven voltage drops when light is switched off.
* A stack modification that looks nearly identical in top-line degradation can be distinguished through room-temperature re-measurement every 15 cycles and analysis of interface charge barriers.
* Field modules with the changed stack sustain higher voltage through the day, including early morning, and higher voltage and fill factor at lower irradiance over a few months.

📋 **Clip Abstract** Accelerated light-dark cycling at 90°C compares two stacks over 120 hours and uses room-temperature re-measurement every 15 cycles to expose ion migration and interface charge-barrier effects hidden in top-line degradation. The stack change mitigating these effects is linked to outdoor module data with higher daytime voltage and higher voltage and fill factor at lower irradiance over a few months.

About the speaker:
* Speaker: Adam Lorenz
* Company: CubicPV
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#LightDarkCycling, #IonMigration, #ChargeBarrierAnalysis, #EnergyYieldAnalysis, #PerovskiteSolarCells, #PerovskitePhotovoltaics

09:38 - 11:40

How can indoor light soaking, five-sun UV, and independent electrical bias reveal perovskite degradation?

How can indoor light soaking, five-sun UV, and independent electrical bias reveal perovskite degradation?

Indoor testing uses a bank of PV bake ovens—light-soaking chambers combining one-sun illumination with heat. Aggressive runs sit at 90 °C; variable-temperature testing spans up to 105 °C and back to room temperature. Best devices retain 95% of power after 1,000 hours at 90 °C, which translates to 10 or 20 years depending on climate.

The chambers control illumination for day/night cycles and white light; because the platform is a four-terminal tandem, spectral match matters less when studying only the perovskite. A UV component reaches up to five suns. The stage now uses Peltier temperature cycling instead of a pad heater, enabling up-and-down temperature control.

Custom measurement boards monitor up to 216 independent channels. With 50 mm coupons, 36 samples each carrying six pixels can be tracked independently. Some pixels are held at maximum power point, some at open-circuit voltage, and some at short circuit, revealing how electrical bias interacts with degradation conditions.

In this short video, you can learn:
* Best devices retained 95% of power after 1,000 hours at 90 °C, translating to 10–20 years depending on climate.
* Testing can apply one-sun white light, day/night cycles, up to five suns of UV, and Peltier-driven temperature cycling from room temperature to 105 °C.
* Custom boards track up to 216 channels across 50 mm coupons, holding pixels at maximum power point, open-circuit voltage, or short circuit to study bias-degradation interactions.

📋 **Clip Abstract** Indoor light-soaking chambers combine one-sun illumination, 90–105 °C heat, day/night cycling, up to five-sun UV, and Peltier temperature control. Custom boards monitor 216 independent channels on 50 mm coupons, comparing maximum-power, open-circuit, and short-circuit biases to link electrical stress with perovskite degradation.

About the speaker:
* Speaker: Adam Lorenz
* Company: CubicPV
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteLightSoaking, #PeltierTemperatureCycling, #FourTerminalTandem, #MaximumPowerPointBias, #PerovskiteSolarCells, #PVBankability

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page