top of page

Amr Maaroufi

Hummink

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Amr Maaroufi | Hummink: How does capillary printing use AFM-style pipettes to reach 250,000 centipoise and 660-nanometer features?

03:06 - 05:08

Other snippets from this talk

Summary of the clip:

How does capillary printing use AFM-style pipettes to reach 250,000 centipoise and 660-nanometer features?

The approach takes an atomic force microscope cantilever that vibrates on the z-axis and replaces the scanning probe with a hollow pipette filled with ink. Deposition uses capillary force only: the meniscus contacts the substrate, a drop forms like a fountain pen, and the X-Y table moves. Inks can also be formulated to lift and grow bumps; the patented method is called high precision capillary printing.

Compared with inkjet, the key axes are viscosity and dimension. Inkjet has a ceiling around 50 or 100 centipoise, while this process has printed 250,000 centipoise in real life, the highest print done. Feature size is described by pipette size, from 50 microns down to the highest-resolution print at 660 nanometers.

Material compatibility is high, and the company also supplies its own inks. The same capillary principle supports moving the X-Y table and formulating inks for lift and bump growth, while the demonstrated range spans pipette sizes from 50 microns down to 660-nanometer features. These results are presented as actual prints done in real life.

In this short video, you can learn:
* Capillary printing swaps the AFM scanning probe for a hollow ink-filled pipette and dispenses by capillary force.
* The process has printed 250,000 centipoise versus an inkjet ceiling around 50 or 100 centipoise.
* Pipette-based feature sizes range from 50 microns down to a 660-nanometer highest-resolution print.

πŸ“‹ **Clip Abstract** High precision capillary printing adapts an AFM cantilever that vibrates on the z-axis, replacing the probe with an ink-filled hollow pipette and dispensing only through capillary force. It compares to inkjet by reaching 250,000 centipoise in real prints and feature sizes from 50 microns down to 660 nanometers, with high material compatibility and in-house inks.

About the speaker:
* Speaker: Amr Maaroufi
* Company: Hummink
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
πŸ“… Save the date: 9 and 10 June 2027
πŸ“ Mountain View, California (Silicon Valley)
πŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#CapillaryPrinting, #HighViscosityInk, #AFMPipette, #SubmicronFeatures, #AdditiveManufacturing, #PrintedElectronics

This is a highlight of the presentation:

Redefining Precision In Additive Manufacturing With Capillary Printing

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

06:16 - 07:47

What separates a tabletop R&D capillary printer from a fab-integrated printing module?

What separates a tabletop R&D capillary printer from a fab-integrated printing module?

The Nazca tool is a tabletop capillary printer for prototyping, handling substrate sizes up to six-inch wafers. It is aimed at researchers and R&D departments that need to prototype ideas very fast. It shares the same technology core as the industrial branch, keeping the product portfolio simple.

The Bird module is designed for industrial operations and fab operation. It is not a standalone tool; it is a printing module that can be integrated into a bigger tool with other modules. It can integrate with laser and inspection elements and communicates via an API with surrounding elements.

The same technology principle spans both branches: a simple way for prototyping and an automatic way for in-fab production. The Bird module must be integrated into a tool supplied by a tool manufacturer. The software is also very easy to use, shown as a screenshot in the presentation.

In this short video, you can learn:
* Nazca is a tabletop prototyping tool that works with substrate sizes up to six-inch wafers.
* Bird is a printing module for fab integration, not a standalone tool, and can sit in a bigger tool with laser and inspection modules.
* Both branches use the same technology core, while Bird communicates via an API and the software is designed to be very easy to use.

πŸ“‹ **Clip Abstract** The clip distinguishes Nazca, a tabletop capillary printer for rapid R&D prototyping on substrates up to six-inch wafers, from Bird, a printing module built for fab integration. Bird is not standalone: it integrates into larger tools with laser and inspection elements, communicates via API, and shares the same technology core and easy-to-use software approach.

About the speaker:
* Speaker: Amr Maaroufi
* Company: Hummink
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
πŸ“… Save the date: 9 and 10 June 2027
πŸ“ Mountain View, California (Silicon Valley)
πŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#NazcaTool, #BirdModule, #SixInchWafers, #APIIntegration, #AdditiveManufacturing, #PrintedElectronics

10:18 - 12:39

What have customers printed, from 660-nanometer quantum-dot matrices to transistors and repaired copper lines?

What have customers printed, from 660-nanometer quantum-dot matrices to transistors and repaired copper lines?

With Polish partner QNA, the tool printed a matrix of quantum dots ranging from 10 microns down to 660 nanometers, shown as real SEM images to demonstrate machine capability. The stated application is colour-converting layers, particularly for the display industry and the microLED development work around it β€” the pitch being that matrices at that scale open a wide application space for emissive and converting layers.

Duke University in the US used the machine for a multi-step, multi-ink process published in Nature Electronics: silver nanoparticle ink printed the electrodes, then carbon nanotubes, then a dielectric encapsulated everything on a gap in substrate. Characterization confirmed everything works β€” a printed transistor built entirely from sequential additive deposition steps rather than a single ink.

Repair is one of the biggest business cases. With Hanyang University in Korea, copper lines were repaired using silver ink and subjected to more than 600 thermal cycles; measured conductivity values did not move after 600 cycles. Dimensions were in the 40-micron range β€” comfortable, not challenging, for the technology β€” chosen to showcase ink capability.

In this short video, you can learn:
* Quantum-dot matrices print from 10 microns down to 660 nanometers, verified by SEM images.
* A Nature Electronics transistor was built by sequential printing of silver nanoparticle electrodes, carbon nanotubes and a dielectric encapsulant.
* Silver-ink repairs to copper lines held conductivity unchanged after more than 600 thermal cycles.

πŸ“‹ **Clip Abstract** Customer and partner work spans quantum-dot matrices from 10 microns to 660 nanometers, a multi-ink printed transistor published in Nature Electronics, and silver-ink repair of copper lines. The repair case survived over 600 thermal cycles with no conductivity shift at 40-micron dimensions.

About the speaker:
* Speaker: Amr Maaroufi
* Company: Hummink
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
πŸ“… Save the date: 9 and 10 June 2027
πŸ“ Mountain View, California (Silicon Valley)
πŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#CapillaryPrinting, #QuantumDotMatrices, #SilverNanoparticleInk, #ThermalCyclingReliability, #PrintedElectronics, #AdditiveManufacturing

08:41 - 09:45

How small and tall can capillary-printed silver features be, and when do gold and indium arrive?

How small and tall can capillary-printed silver features be, and when do gold and indium arrive?

Capillary printing can produce conductive silver lines down to two microns in width, with spacing that can go even smaller. The same capability covers pads and bonding, including a potential application in redistribution-layer repair. That sets the resolution and repair use case in silver today.

For bumping, the reported capability is five-micron-diameter bumps. Silver bumps are available today, while indium bumping is still being developed. Aspect ratio is described as very flexible, up to 20 to one, which broadens the geometry range beyond simple planar lines.

Gold and indium are described as more in the works, with those capabilities expected in 2027; today the material is silver. The process also prints dielectric, used for line passivation and in at least one case for waveguides. That extends capillary printing from conductors into insulation and optical structures.

In this short video, you can learn:
* Silver lines reach two microns width, with spacing potentially smaller.
* Five-micron silver bumps are available, while indium bumping and gold are targeted for 2027.
* Dielectric printing covers line passivation and has been used for waveguides.

πŸ“‹ **Clip Abstract** Capillary printing delivers conductive silver lines down to two microns wide and five-micron bumps, with aspect ratios up to 20 to one. Gold and indium are still in development for 2027, while dielectric printing already supports line passivation and waveguide cases.

About the speaker:
* Speaker: Amr Maaroufi
* Company: Hummink
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
πŸ“… Save the date: 9 and 10 June 2027
πŸ“ Mountain View, California (Silicon Valley)
πŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#CapillaryPrinting, #SilverInk, #IndiumBumping, #DielectricPassivation, #AdditiveElectronics, #PrintedElectronics

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page