Daniel Lacorte | Ames Goldsmith: Can you get better performance for less cost? Why silver-coated copper might be the future for some printed electronics.
00:11:41 - 00:13:07
Other snippets from this talk
Summary of the clip:
Can you get better performance for less cost? Why silver-coated copper might be the future for some printed electronics.
Addressing the major industry challenge of rising silver prices, this clip introduces silver-coated copper particles as a high-performance, cost-effective alternative. The core concept is to leverage an inexpensive copper core while using a thin, functional layer of silver on the surface to provide oxidation resistance and excellent conductivity. The manufacturing process involves an electroless plating of silver onto the copper, which can then be mechanically milled into flakes to enhance particle-to-particle contact.
The speaker presents compelling comparative data between a pure silver flake and a silver-coated copper flake with a similar particle size (D50). Both materials were formulated into pastes at the same weight percent, achieving similar viscosities. This sets the stage for a direct, apples-to-apples comparison of their electrical performance in a realistic formulation.
The results are striking: the silver-coated copper flake, containing only 15% silver by weight, not only matches but slightly outperforms the pure silver flake in terms of electrical conductivity. This demonstrates that it's possible to significantly reduce the precious metal content and cost of a formulation without sacrificing, and in some cases even improving, performance. The speaker notes this technology is already gaining traction in demanding applications like HJT photovoltaics.
In this short video, you can learn:
* The structure and manufacturing process of silver-coated copper particles.
* How silver-coated copper can significantly reduce material costs in conductive inks.
* Performance data showing that silver-coated copper can match or exceed the conductivity of pure silver.
π **Clip Abstract** This clip presents a compelling case for silver-coated copper as a cost-effective alternative to pure silver in printed electronics. It explains the material's structure and presents data showing it can deliver superior electrical performance at a fraction of the cost, addressing a key market need.
π Link in comments π
#SilverCoatedCopper, #ElectrolessPlating, #ConductiveInks, #HJTPhotovoltaics, #PrintedElectronics, #FlexibleElectronics
This is a highlight of the presentation:
More Highlights from the same talk.
02:59 - 04:57
Why does silver-coated copper reach 0.68 mΩ·cm versus pure silver's 0.76 at 80 wt% loading?
Why does silver-coated copper reach 0.68 mΩ·cm versus pure silver's 0.76 at 80 wt% loading?
Silver prices have stabilized around $60 a troy ounce, after reaching $100 to $120 last year and early this year, still roughly triple a couple of years earlier. That volatility drives the need for more sustainable, cost-effective printed-electronics pastes and for reducing total cost of ownership. Silver-coated copper is the manufacturing route discussed: a copper core with a silver surface coating.
The silver coating passivates the copper, adds antioxidative properties and improves reliability versus pure copper, with greater corrosion resistance. The material can be used as is or back-end processed into flakes with various morphologies. In an epoxy formulation loaded at 80 weight percent, the SF134-NM3 pure silver flake and silver-coated copper achieve very similar viscosity at similar weight percent.
Functional data show 0.68 milliohms per centimeter for silver-coated copper versus 0.76 for pure silver. Depending on formulation and constituents, similar functional properties are reached with 85% less silver in the total formulation, giving about 60 to 70% cost reduction. Pure silver is inert, while copper can corrode and affect functional properties, including pot life.
In this short video, you can learn:
* At 80 wt% loading in epoxy, silver-coated copper measured 0.68 mΩ·cm versus 0.76 mΩ·cm for a comparable pure silver flake.
* The formulation can use 85% less silver in total while reaching similar functional properties, translating to about 60β70% cost reduction.
* A silver coating passivates the copper core, adds antioxidative and corrosion-resistant behavior, and improves reliability versus pure copper.
π **Clip Abstract** Silver-coated copper uses a copper core with a silver coating to passivate the surface, improve reliability and reduce paste cost as silver prices remain around $60 a troy ounce. At 80 wt% loading in epoxy, it reached 0.68 mΩ·cm versus 0.76 for pure silver, enabling similar functional properties with 85% less silver and about 60β70% cost reduction.
About the speaker:
* Speaker: Daniel Lacorte
* Company: Ames Goldsmith
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#SilverCoatedCopper, #ConductivePaste, #CopperCoreFlakes, #MilliohmResistivity, #PrintedElectronics, #AdditiveElectronics
06:45 - 08:59
Spherical, flake or dendritic silver-coated copper β which morphology for fine lines, EMI or conductivity?
Spherical, flake or dendritic silver-coated copper β which morphology for fine lines, EMI or conductivity?
Spherical powders have a narrow particle size distribution for fine-line printing, inks and adhesives. These dense, lower-surface-area powders allow higher solids loading without a large viscosity impact. Multiple particle sizes match screen-printing resolution, and the morphology suits die-attach adhesives needing thermal or electrical conduction.
Flake morphologies have higher aspect ratio and better adhesion onto various substrates in ink or adhesive formulations. They work well in EMI shielding inks where other components in the electronic device need shielding. Particle size, density and solids loading vary by application, requiring a broad materials portfolio.
Dendritic morphologies vary in aspect ratio and particle size. Their oblong morphology creates many particle touchpoints, which can improve electrical conductivity within the ink. Pure copper flakes are also being developed for low-cost thick film applications.
In this short video, you can learn:
* Spherical powders' narrow size distribution and low surface area support fine-line inks and high solids loading.
* Flake morphologies improve adhesion onto substrates and suit EMI shielding inks.
* Dendritic morphologies create many particle touchpoints and can improve electrical conductivity in the ink.
π **Clip Abstract** Spherical, flake and dendritic morphologies are selected by particle size, density and solids loading for each application. Spherical powders serve fine-line printing and die attach, flakes serve adhesion and EMI shielding, and dendritic grades target conductivity through many particle touchpoints.
About the speaker:
* Speaker: Daniel Lacorte
* Company: Ames Goldsmith
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#SphericalMorphology, #FlakeMorphology, #DendriticMorphology, #EMIShieldingInk, #PrintedElectronics, #ConductiveInks
05:47 - 06:45
Which silver coating leaches the least copper after 48 hours in 2% oleic acid?
Which silver coating leaches the least copper after 48 hours in 2% oleic acid?
A leaching study used one gram of silver-coated copper mixed with about 10 mL of 2% oleic acid in methanol. Copper complex formed and leached into the top solution. The pure-copper control, sample number one, leached the most over time.
After sitting for about 48 hours, sample number three showed the least leaching among five different chemistries. Those five chemistries are widely available in patents and literature, but they were used on the same copper technology. The only difference was the coating chemistry, described as robust.
The comparison isolates coating chemistry rather than the underlying copper. The result points to a silver-coated copper material with reduced leaching in 2% oleic acid/methanol after 48 hours. A broad silver-coated copper portfolio was also presented.
In this short video, you can learn:
* One gram of silver-coated copper was mixed with about 10 mL of 2% oleic acid in methanol for the leaching study.
* After about 48 hours, the pure-copper control leached the most, while sample number three leached the least among five chemistries.
* The five chemistries used the same copper technology, so the only difference was the coating chemistry.
π **Clip Abstract** A leaching test mixed one gram of silver-coated copper with about 10 mL of 2% oleic acid in methanol and tracked copper complex formation in the top solution. After about 48 hours, sample number three showed the least leaching among five chemistries that shared the same copper technology, isolating the coating chemistry as the difference.
About the speaker:
* Speaker: Daniel Lacorte
* Company: Ames Goldsmith
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
π
Save the date: 9 and 10 June 2027
π Mountain View, California (Silicon Valley)
π Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
π
Save the date: 20 and 21 October 2027
π Berlin, Germany
π Info: https://www.techblick.com/electronicsreshaped
#SilverCoatedCopper, #OleicAcidLeaching, #CopperComplexFormation, #48HourLeaching, #PrintedElectronics, #ConductiveInks
Other talks by Daniel Lacorte
- Advances in Silver-Coated Copper Materials for High-Performance Printed Electronics Β· The Future of Electronics RESHAPED 2026 Berlin
- Advancements in metallic particle development for next-generation printed electronics applications Β· The Future of Electronics RESHAPED 2025 USA
- Advances in metallic particle development and manufacturing: impact on paste and final application Β· The Future of Electronics RESHAPED 2024 Berlin
More highlights from Daniel Lacorte
- ⢠Why does silver-coated copper reach 0.68 mΩ·cm versus pure silver's 0.76 at 80 wt% loading? · Electronics RESHAPED 2026 | Berlin
- βΆ Which silver coating leaches the least copper after 48 hours in 2% oleic acid? Β· Electronics RESHAPED 2026 | Berlin
- βΆ Spherical, flake or dendritic silver-coated copper β which morphology for fine lines, EMI or conductivity? Β· Electronics RESHAPED 2026 | Berlin
- βΆ At $60/oz silver, is plated copper the default β and can these pastes cure in air at 175 Β°C? Β· Electronics RESHAPED 2026 | Berlin
- βΆ How can manipulating precipitation process parameters affect the final particle morphology? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ How does mechanical milling enhance the properties of silver flakes for conductive inks? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ What are the key conductivity mechanisms in submicron silver flakes, and how do they differ between fired and non-fired applications? Β· The Future of Electronics RESHAPED USA | Boston 2025
- βΆ Sintering vs. simple contact: Can two completely different conductivity mechanisms achieve the same high performance? Β· The Future of Electronics RESHAPED 2024
- βΆ How can a simple surface coating on a silver particle be the key to unlocking low-temperature sintering? Β· The Future of Electronics RESHAPED 2024


