top of page

Florian Mathies

Helmholtz-Zentrum Berlin

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Florian Mathies | Helmholtz-Zentrum Berlin: Why is a complex perovskite stack not automatically compatible with industrial production?

14:27 - 15:56

Other snippets from this talk

Summary of the clip:

Why is a complex perovskite stack not automatically compatible with industrial production?

The stack is complex, but the questioner notes companies moving into or close to industrial production are not quite compatible. The answer says the system is complex and has been shown within the different centers that it can already be transferred; an easier one in principle would be easier to transfer.

At the same time, the complex stack is described as the most interesting thing to bring. The work is on a more academic level, so the interest is in what is going on at the interfaces, for example. That framing explains why tackling the stack is not only a production-transfer question.

The route to matching research with the real world is therefore conditional: if industry, solely on its own or together with the academic side, develops a more easy stack, the response is that they are on it. At the moment, that is the stated position.

In this short video, you can learn:
* A complex perovskite stack is not automatically compatible with companies going into or close to industrial production.
* The complex system has been shown within the different centers to be transferable, and an easier stack would in principle be easier to transfer.
* Academic work focuses on what happens at interfaces, while a more easy stack developed by industry alone or with the academic side would be taken on.

📋 **Clip Abstract** The exchange asks how a complex perovskite stack can match the real world when companies entering or close to industrial production find it not quite compatible. The answer says transfer has already been shown within different centers, academic interest is at the interfaces, and a more easy industry-developed stack would be taken on.

About the speaker:
* Speaker: Florian Mathies
* Company: Helmholtz-Zentrum Berlin
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteStack, #IndustrialProduction, #InterfaceResearch, #StackTransfer, #PerovskitePhotovoltaics, #SolarCellManufacturing

This is a highlight of the presentation:

Turning Perovskite Innovation into Impact: The Solar TAP Approach

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

04:53 - 06:57

How does the Stage-Gate framework help scale perovskite solar cells from lab spin-coating to automated slot-die deposition?

How does the Stage-Gate framework help scale perovskite solar cells from lab spin-coating to automated slot-die deposition?

The Stage-Gate publication investigated single-junction perovskite solar cells and identified stages from small-area lab devices to mini modules, where PicoQuant showed early results, then larger modules maybe two square meters. The established framework covers perovskite and organic photovoltaics, the project's two main photovoltaic technologies.

This open-innovation action sits at low TRL, maybe three or four, even two, because spin coating is solely a lab process. Three involved centres aligned processes and working groups, establishing a common perovskite architecture and baseline as a standing operating procedure, so efficiencies can transfer between centres.

In future runs, slot-die coating is used, not only manual slot-die coating by a lab engineer or PhD student, but automated fabrication platforms, for example from Cypress, which also partners in SolarTEP. This future run uses slot die coating with automated fabrication platforms.

In this short video, you can learn:
* The Stage-Gate framework maps single-junction perovskite solar cells from small-area lab devices through PicoQuant mini modules to modules maybe two square meters.
* Three centres aligned processes and working groups to establish a common perovskite architecture and baseline as a standing operating procedure, enabling transferable efficiencies.
* Future runs use slot-die coating, moving from manual coating by a lab engineer or PhD student to automated fabrication platforms from Cypress, a SolarTEP partner.

📋 **Clip Abstract** A Stage-Gate framework for single-junction perovskite solar cells defines stages from small-area lab devices to mini modules, where PicoQuant showed early results, and larger modules maybe two square meters. The low-TRL open-innovation action aligned three centres on a common perovskite baseline, with future slot-die coating moving from manual operation to automated fabrication platforms such as Cypress.

About the speaker:
* Speaker: Florian Mathies
* Company: Helmholtz-Zentrum Berlin
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#PerovskiteSolarCells, #SlotDieCoating, #AutomatedFabricationPlatforms, #TransferableEfficiencies, #OrganicPhotovoltaics, #EmergingPhotovoltaics

05:14 - 07:24

What stage-gate criteria separate a lab perovskite device from a pilot-line-ready material?

What stage-gate criteria separate a lab perovskite device from a pilot-line-ready material?

The stage-gate process maps the steps from a small lab area to a big pilot line: what measurements are needed and how quality is measured. Driven by the Jülich group in the Solartab network, it gives a basis to develop further processes and projects within Solartab.

As the schematic shows, moving from a lab-based process where devices are worked on to different stages means scaling up: faster scale-up and larger modules. At the end, the materials actually used and usable in the process become fewer and fewer, while materials at the device level remain more research-focused.

Within the stage-gate process, materials reaching the later stages can be considered usable for a pilot line, whereas materials at the beginning, on a device level, are more research-focused. There may be many challenges to overcome to bring them to a higher stage level.

In this short video, you can learn:
* The stage-gate process defines what measurements and quality checks are needed between a small lab area and a big pilot line.
* The Jülich group drove this stage-gate process within the Solartab network to develop further processes and projects.
* Later-stage materials are fewer and more likely usable for a pilot line, while device-level materials remain research-focused with challenges to scale.

📋 **Clip Abstract** A stage-gate process connects small lab-area work to a big pilot line by defining steps, measurements and quality checks. Driven by the Jülich group in the Solartab network, it shows that scaling up yields faster, larger modules with fewer usable materials, while device-level materials remain research-focused and face challenges at higher stages.

About the speaker:
* Speaker: Florian Mathies
* Company: Helmholtz-Zentrum Berlin
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#StageGateProcess, #PilotLineScaleUp, #SolartabNetwork, #MaterialQualityChecks, #PerovskiteSolarCells, #OpenInnovationActions

10:06 - 11:29

Why does Europe still debate lead while China runs gigawatt perovskite single-junction and tandem factories?

Why does Europe still debate lead while China runs gigawatt perovskite single-junction and tandem factories?

The assessment is stark: China already has gigawatt factories producing perovskite solar cells, both single junctions and tandems. Europe remains in a debate over whether lead is acceptable, so the region is way behind on industrial adoption. Collaborators from China still show willingness to work with European groups, but that does not remove the competitive gap.

European research centres still bring expertise, especially on the analytics side, according to discussions with Chinese collaborators. That analytical capability is a lever for collaboration, not a claim of manufacturing parity. However, finding collaboration partners within Europe or Germany for new projects is becoming harder, which complicates the route from lab results to industrial relevance.

An audience question then asks whether machine learning and material prediction are relied on before fabricating devices. The question is posed but not answered here. The surrounding message remains the same: industrial scale in China, analytical strength in Europe, and a shrinking pool of European or German project partners.

In this short video, you can learn:
* China already operates gigawatt factories for perovskite solar cells, including single junctions and tandems, while Europe still debates lead.
* European groups are seen as bringing strong analytics expertise, and Chinese collaborators remain willing to work with them.
* Finding collaboration partners within Europe or Germany for new projects is getting harder, and the audience question on machine learning and material prediction was not answered in this excerpt.

📋 **Clip Abstract** China has gigawatt factories producing perovskite solar cells, both single junctions and tandems, while Europe remains behind and still debates whether lead is acceptable. European research groups retain analytics expertise and Chinese collaborators still work with them, but finding European or German project partners is becoming harder, and a question on machine learning and material prediction before device fabrication goes unanswered here.

About the speaker:
* Speaker: Florian Mathies
* Company: Helmholtz-Zentrum Berlin
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#PerovskiteSolarCells, #SingleJunctionTandems, #GigawattFactories, #AnalyticsExpertise, #Photovoltaics, #SolarIndustry


About this talk

→ Turning Perovskite Innovation into Impact: The Solar TAP Approach · Florian Mathies · Perovskite Connect 2026


More highlights from Florian Mathies

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page