Henning Richter | Nano-C, Inc.: Can purifying heavy fullerenes up to C160 resolve the band alignment bottleneck in next-gen organic electronics?
00:02:44 - 00:04:45
Other snippets from this talk
Summary of the clip:
Can purifying heavy fullerenes up to C160 resolve the band alignment bottleneck in next-gen organic electronics?
Scaling up the production of C60 and C70 is only half the battle in organic electronics; the true technical frontier lies in downstream purification and exploiting heavier fullerenes. Using advanced fractionated crystallization and automated chromatography, it is now possible to separate crude combustion mixtures containing up to 20% fullerenes into high-purity streams of 99.9% C60 and C70. Interestingly, this process also isolates highly abundant but underutilized species like C84, alongside massive cage structures up to C160 identified via HPLC-MS.
The strategic value of these heavier fullerenes, particularly C84, lies in their altered optoelectronic properties. C84 exhibits a distinct shift in absorption spectra toward longer wavelengths and has a LUMO level approximately 0.3 eV lower than that of C60 or C70. This energy offset presents a massive, untapped opportunity to engineer precise band alignments in specialized electronic acceptor roles.
For materials scientists and product managers in the printed electronics sector, accessing reliable, high-purity supplies of these non-standard fullerenes could unlock entirely new device architectures. As these materials transition from laboratory curiosities to commercial offerings, they could redefine efficiency limits in organic photovoltaics and near-infrared photodetectors.
In this short video, you can learn:
* How automated chromatography and crystallization isolate C60, C70, and C84 from raw soot at scale.
* The precise optoelectronic shift of C84, including its 0.3 eV lower LUMO level.
* The detection of ultra-heavy fullerene cages up to C160 using HPLC-MS.
📋 **Clip Abstract**
This clip details the downstream purification of combustion-derived soot to yield high-purity C60, C70, and heavier fullerenes. It highlights the potential of C84 and larger carbon cages up to C160 to enable advanced band-gap engineering in optoelectronics.
#HeavyFullerenes, #BandGapEngineering, #FractionatedCrystallization, #OrganicAcceptors, #OrganicPhotovoltaics, #PrintedElectronics
This is a highlight of the presentation:
Innovative Interface Materials for Perovskite Photovoltaics
More Highlights from the same talk.
03:22 - 05:34
Can fullerene production scale from 400 kg per year to tandem perovskite manufacturing volumes?
Can fullerene production scale from 400 kg per year to tandem perovskite manufacturing volumes?
Fullerenes are made by exothermic oxidation of an aromatic hydrocarbon, already scaled to at least 400 kg per year of a C60/C70 mixture. The reactor output contains about 20% or more of that mixture. Downstream processing is matched at the same level: extraction, multiple fractionators, crystallization and chromatographic steps.
Purification starts with straightforward extraction using an aromatic solvent such as toluene, followed by purification steps selected for the target material: pure C60 or pure C70. C84 can also be supplied if market demand exists, because the as-produced material contains a meaningful C84 fraction. Standard purity is above 99.5% by peak integration at 300 nm.
Production is prepared to scale up quickly to quantities the market may demand. Materials are optimized at 300 nm for solar and other electronic applications. The same downstream sequence—extraction, fractionation, crystallization and chromatography—supports pure C60, pure C70 and, potentially, C84 at industrial scale.
In this short video, you can learn:
* Fullerene synthesis is an exothermic oxidation of an aromatic hydrocarbon already scaled to at least 400 kg per year of mixed C60/C70.
* Reactor output contains about 20% or more C60/C70 mixture, then toluene extraction and multi-step fractionation, crystallization and chromatography purify it.
* Standard purity is above 99.5% by peak integration at 300 nm, with C84 available if demand exists.
📋 **Clip Abstract** Fullerene manufacturing uses exothermic oxidation of an aromatic hydrocarbon and is already scaled to at least 400 kg per year of C60/C70 mixture. Downstream extraction, fractionation, crystallization and chromatography deliver pure C60 or C70 above 99.5% purity by peak integration at 300 nm, with C84 possible if demand exists.
About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FullereneOxidation, #C60C70Mixture, #TolueneExtraction, #ChromatographicPurification, #PerovskiteTandem, #SolarCellMaterials
13:30 - 14:46
Can an ammonium-bearing pyrene interlayer beat evaporated C60 on hysteresis, fill factor and Voc in p-i-n perovskite cells?
Can an ammonium-bearing pyrene interlayer beat evaporated C60 on hysteresis, fill factor and Voc in p-i-n perovskite cells?
In p-i-n architecture, an ammonium-bearing pyrene derivative was evaluated with the group of Stephan De Wolf at KAUST. Patent applications are pending, and a publication is expected to be submitted within days. The reported comparison focuses on the p-i-n device stack and on evaporated C60.
Compared with evaporated C60, the ammonium-bearing pyrene derivative showed clearly reduced hysteresis, higher fill factor and higher Voc. These results were said to be consistent with better band alignment. That combination is technically meaningful because hysteresis, fill factor and Voc are the exact metrics named in the comparison, and the improvement was reported for the p-i-n architecture.
The same stack or system was used in a device where the conclusion could be confirmed, according to the reported work. Significantly improved light-soaking characteristics were also observed under one sun. Those two observations extend the comparison beyond the C60 replacement metrics, linking the derivative result to device confirmation and to light-soaking behavior under one-sun illumination.
In this short video, you can learn:
* An ammonium-bearing pyrene derivative in p-i-n architecture showed reduced hysteresis, higher fill factor and higher Voc versus evaporated C60, consistent with better band alignment.
* The same stack or system was used in a device that confirmed the conclusion, and light-soaking characteristics under one sun improved significantly.
* Patent applications are pending and a publication was expected to be submitted within days, with the work done alongside Stephan De Wolf's group at KAUST.
📋 **Clip Abstract** An ammonium-bearing pyrene derivative was evaluated in p-i-n perovskite architecture with KAUST's Stephan De Wolf group, with patent applications pending and a publication expected within days. Compared with evaporated C60, it showed clearly reduced hysteresis, higher fill factor and higher Voc, consistent with better band alignment; the same stack confirmed the conclusion in a device and showed significantly improved one-sun light soaking.
About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#AmmoniumPyreneDerivative, #EvaporatedC60, #HysteresisReduction, #LightSoaking, #PerovskitePhotovoltaics, #SolarCellInterfaces
11:27 - 13:10
Which self-assembled monolayer gave a fully printed flexible single-junction perovskite cell low hysteresis and decent light soaking?
Which self-assembled monolayer gave a fully printed flexible single-junction perovskite cell low hysteresis and decent light soaking?
The screening covered a range of self-assembled monolayer materials in a NIP architecture. The identified structure, PC6060BA, delivered the highest performance in that screen and, notably, quite reduced hysteresis. Solubility was framed as critical for deposition, linking material selection to the coating step rather than only to final device metrics.
A Solar Factory of the Future publication using the same NIP architecture showed quite impressive performance for a single-junction perovskite device, taking into account that it was a fully printed device. Most importantly, that same work reported quite decent light soaking data.
The device was on a flexible substrate. The work links that choice to significantly improved mechanical properties and flags it as potentially important going forward. A follow-up publication from the same group used the same material, extending the PC6060BA thread beyond the initial screen.
In this short video, you can learn:
* PC6060BA was identified after systematic screening of self-assembled monolayer materials in a NIP architecture.
* That monolayer gave the highest performance in the screen and quite reduced hysteresis.
* A fully printed single-junction device on a flexible substrate showed decent light soaking data and improved mechanical properties.
📋 **Clip Abstract** Systematic screening of self-assembled monolayer materials in a NIP architecture identified PC6060BA as the highest-performing structure, with quite reduced hysteresis. The same material appeared in a fully printed single-junction perovskite device on a flexible substrate, where decent light soaking data and improved mechanical properties were reported.
About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PC6060BA, #SelfAssembledMonolayer, #NIPArchitecture, #LightSoakingData, #PerovskiteSolarCells, #FlexiblePhotovoltaics
About this talk
→ Innovative Interface Materials for Perovskite Photovoltaics · Henning Richter · The Future of Electronics RESHAPED 2025
Other talks by Henning Richter
- Interface Materials Enabling Single-Junction Perovskite and Tandem Solar Cell Technologies at Industrial Scale · Perovskite Connect 2026
More highlights from Henning Richter
- ▶ Can fullerene production scale from 400 kg per year to tandem perovskite manufacturing volumes? · Perovskite Connect 2026 | Berlin
- ▶ Which self-assembled monolayer gave a fully printed flexible single-junction perovskite cell low hysteresis and decent light soaking? · Perovskite Connect 2026 | Berlin
- ▶ Can an ammonium-bearing pyrene interlayer beat evaporated C60 on hysteresis, fill factor and Voc in p-i-n perovskite cells? · Perovskite Connect 2026 | Berlin
- ▶ Can one molecule anchor to the oxide electrode and stabilize perovskite while silver-nanowire hybrids match transparency? · Perovskite Connect 2026 | Berlin


