top of page

Henning Richter

Nano-C, Inc.

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Henning Richter | Nano-C, Inc.: Can one molecule anchor to the oxide electrode and stabilize perovskite while silver-nanowire hybrids match transparency?

16:01 - 18:05

Other snippets from this talk

Summary of the clip:

Can one molecule anchor to the oxide electrode and stabilize perovskite while silver-nanowire hybrids match transparency?

The talk starts from two commonly used HTL materials in perovskite PV, then adds functionality: two compounds can be cross-linked at 100°C, one variant has an inserted amide group, and another keeps the amide but is asymmetric. A recent University of Kaunas publication adds two functionalities—phosphonic acid plus ammonium bromide or ammonium iodide.

The design intent is dual: one functionality adheres to the metal-oxide or transparent conducting electrode, while the ammonium groups could help stabilize the perovskite. Characterization covers solvents, stability, film thickness and electronic properties, supported by a slot-die coater, spray coater, film-thickness tool, contact-angle measurement and a recently acquired Kelvin probe for tension measurements.

Transparent conducting films include NiZnT formulations usable with different coating techniques and silver-nanowire ZnT hybrids. One silver-nanowire ZnT hybrid example was cited as having the same transparency at a given point. Partner interaction includes joint development, and the material set is evaluated with the coating and probe tools described.

In this short video, you can learn:
* Two commonly used HTL compounds can be cross-linked at 100°C, with amide and asymmetric-amide variants adding functionality.
* A University of Kaunas design pairs phosphonic acid with ammonium bromide or iodide so one group anchors to the oxide/TCE and the ammonium helps stabilize perovskite.
* Transparent conducting films include NiZnT formulations and silver-nanowire ZnT hybrids, with one hybrid cited at the same transparency at a given point.

📋 **Clip Abstract** The clip reviews interface materials for perovskite PV, starting from HTL compounds cross-linkable at 100°C and amide-functional variants, plus a University of Kaunas phosphonic-acid/ammonium-halide concept. It then covers characterization with slot-die and spray coating, contact angle and a Kelvin probe, and transparent conducting options including NiZnT formulations and silver-nanowire ZnT hybrids.

About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteHTL, #PhosphonicAcid, #SilverNanowireZnT, #SlotDieCoating, #PerovskiteSolarCells, #TandemSolarCells

This is a highlight of the presentation:

Interface Materials Enabling Single-Junction Perovskite and Tandem Solar Cell Technologies at Industrial Scale

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

03:22 - 05:34

Can fullerene production scale from 400 kg per year to tandem perovskite manufacturing volumes?

Can fullerene production scale from 400 kg per year to tandem perovskite manufacturing volumes?

Fullerenes are made by exothermic oxidation of an aromatic hydrocarbon, already scaled to at least 400 kg per year of a C60/C70 mixture. The reactor output contains about 20% or more of that mixture. Downstream processing is matched at the same level: extraction, multiple fractionators, crystallization and chromatographic steps.

Purification starts with straightforward extraction using an aromatic solvent such as toluene, followed by purification steps selected for the target material: pure C60 or pure C70. C84 can also be supplied if market demand exists, because the as-produced material contains a meaningful C84 fraction. Standard purity is above 99.5% by peak integration at 300 nm.

Production is prepared to scale up quickly to quantities the market may demand. Materials are optimized at 300 nm for solar and other electronic applications. The same downstream sequence—extraction, fractionation, crystallization and chromatography—supports pure C60, pure C70 and, potentially, C84 at industrial scale.

In this short video, you can learn:
* Fullerene synthesis is an exothermic oxidation of an aromatic hydrocarbon already scaled to at least 400 kg per year of mixed C60/C70.
* Reactor output contains about 20% or more C60/C70 mixture, then toluene extraction and multi-step fractionation, crystallization and chromatography purify it.
* Standard purity is above 99.5% by peak integration at 300 nm, with C84 available if demand exists.

📋 **Clip Abstract** Fullerene manufacturing uses exothermic oxidation of an aromatic hydrocarbon and is already scaled to at least 400 kg per year of C60/C70 mixture. Downstream extraction, fractionation, crystallization and chromatography deliver pure C60 or C70 above 99.5% purity by peak integration at 300 nm, with C84 possible if demand exists.

About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#FullereneOxidation, #C60C70Mixture, #TolueneExtraction, #ChromatographicPurification, #PerovskiteTandem, #SolarCellMaterials

13:30 - 14:46

Can an ammonium-bearing pyrene interlayer beat evaporated C60 on hysteresis, fill factor and Voc in p-i-n perovskite cells?

Can an ammonium-bearing pyrene interlayer beat evaporated C60 on hysteresis, fill factor and Voc in p-i-n perovskite cells?

In p-i-n architecture, an ammonium-bearing pyrene derivative was evaluated with the group of Stephan De Wolf at KAUST. Patent applications are pending, and a publication is expected to be submitted within days. The reported comparison focuses on the p-i-n device stack and on evaporated C60.

Compared with evaporated C60, the ammonium-bearing pyrene derivative showed clearly reduced hysteresis, higher fill factor and higher Voc. These results were said to be consistent with better band alignment. That combination is technically meaningful because hysteresis, fill factor and Voc are the exact metrics named in the comparison, and the improvement was reported for the p-i-n architecture.

The same stack or system was used in a device where the conclusion could be confirmed, according to the reported work. Significantly improved light-soaking characteristics were also observed under one sun. Those two observations extend the comparison beyond the C60 replacement metrics, linking the derivative result to device confirmation and to light-soaking behavior under one-sun illumination.

In this short video, you can learn:
* An ammonium-bearing pyrene derivative in p-i-n architecture showed reduced hysteresis, higher fill factor and higher Voc versus evaporated C60, consistent with better band alignment.
* The same stack or system was used in a device that confirmed the conclusion, and light-soaking characteristics under one sun improved significantly.
* Patent applications are pending and a publication was expected to be submitted within days, with the work done alongside Stephan De Wolf's group at KAUST.

📋 **Clip Abstract** An ammonium-bearing pyrene derivative was evaluated in p-i-n perovskite architecture with KAUST's Stephan De Wolf group, with patent applications pending and a publication expected within days. Compared with evaporated C60, it showed clearly reduced hysteresis, higher fill factor and higher Voc, consistent with better band alignment; the same stack confirmed the conclusion in a device and showed significantly improved one-sun light soaking.

About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#AmmoniumPyreneDerivative, #EvaporatedC60, #HysteresisReduction, #LightSoaking, #PerovskitePhotovoltaics, #SolarCellInterfaces

11:27 - 13:10

Which self-assembled monolayer gave a fully printed flexible single-junction perovskite cell low hysteresis and decent light soaking?

Which self-assembled monolayer gave a fully printed flexible single-junction perovskite cell low hysteresis and decent light soaking?

The screening covered a range of self-assembled monolayer materials in a NIP architecture. The identified structure, PC6060BA, delivered the highest performance in that screen and, notably, quite reduced hysteresis. Solubility was framed as critical for deposition, linking material selection to the coating step rather than only to final device metrics.

A Solar Factory of the Future publication using the same NIP architecture showed quite impressive performance for a single-junction perovskite device, taking into account that it was a fully printed device. Most importantly, that same work reported quite decent light soaking data.

The device was on a flexible substrate. The work links that choice to significantly improved mechanical properties and flags it as potentially important going forward. A follow-up publication from the same group used the same material, extending the PC6060BA thread beyond the initial screen.

In this short video, you can learn:
* PC6060BA was identified after systematic screening of self-assembled monolayer materials in a NIP architecture.
* That monolayer gave the highest performance in the screen and quite reduced hysteresis.
* A fully printed single-junction device on a flexible substrate showed decent light soaking data and improved mechanical properties.

📋 **Clip Abstract** Systematic screening of self-assembled monolayer materials in a NIP architecture identified PC6060BA as the highest-performing structure, with quite reduced hysteresis. The same material appeared in a fully printed single-junction perovskite device on a flexible substrate, where decent light soaking data and improved mechanical properties were reported.

About the speaker:
* Speaker: Henning Richter
* Companies: Nano-C, Inc.
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PC6060BA, #SelfAssembledMonolayer, #NIPArchitecture, #LightSoakingData, #PerovskiteSolarCells, #FlexiblePhotovoltaics

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page