James Claypole | AilArian: How can we exploit electromagnetic core-shell structures to make non-magnetic silver fully recyclable?
00:08:41 - 00:09:58
Other snippets from this talk
Summary of the clip:
How can we exploit electromagnetic core-shell structures to make non-magnetic silver fully recyclable?
To solve the zero-percent recycling rate of printed electronics, researchers have developed a design-for-recycling approach using engineered core-shell particles. While pure silver is completely non-magnetic, encapsulating a magnetic ferrite core within a conductive silver shell renders the entire functional particle highly responsive to magnetic fields.
This core-shell architecture leverages the physical "edge effect" in micro-sized particles, where electrical charge travels preferentially along the outer silver boundary rather than penetrating the core. This spatial charge distribution preserves high electrical conductivity while using a significantly lower volume fraction of precious silver.
By incorporating these magnetic core-shell particles into liquid binder formulations, engineers can print highly conductive circuits that can be easily dissolved and magnetically separated at end-of-life. This chemical design bypasses the need for destructive thermal smelting or toxic acid leaching.
In this short video, you can learn:
* The physics of core-shell particles and how the electromagnetic "edge effect" maintains high electrical conductivity.
* How pairing a magnetic ferrite core with a silver shell enables clean magnetic separation of printed circuits.
* The formulation strategy of designing functional electronic inks specifically for closed-loop, non-destructive recycling.
📋 **Clip Abstract** This clip details the material science behind engineering magnetic core-shell particles to enable the magnetic recovery of non-magnetic silver. It discusses how exploiting the electrical edge effect allows developers to maintain high circuit conductivity while facilitating clean magnetic separation at end-of-life.
#CoreShellParticles, #MagneticSeparation, #ConductiveInks, #EdgeEffect, #PrintedElectronics, #CircularElectronics
This is a highlight of the presentation:
More Highlights from the same talk.
02:30 - 04:28
What must printed electronics in packaging do to avoid contaminating EU paper, compost and pulp waste streams?
What must printed electronics in packaging do to avoid contaminating EU paper, compost and pulp waste streams?
In the UK, extended producer responsibility frames packaging around a binary recyclable or non-recyclable test, with contradictory statements over what counts as electronic waste. In the EU, the packaging and packaging waste regulations apply from 12 August this year and centre on design for recyclability: whatever is placed in a package must have a route to be separated out.
The crux is contamination: printed electronics added to packaging must be able to come out without contaminating paper waste streams, without contaminating soil waste in terms of compostability, and without contaminating pulp and paper waste streams. The legislation is less about how those extracted materials are subsequently recycled themselves; it is about preventing interactive elements or longer-term sensors from contaminating existing packaging waste streams.
That means the benefit of interactivity and sensing cannot be delivered at the cost of the waste streams. The requirement is separation: printed electronics have to be removable from the package so paper, compost and pulp and paper routes are not contaminated. The regulatory focus stops at that separation step, not at recycling the electronic materials themselves. Contradictory e-waste definitions add to the difficulty.
In this short video, you can learn:
* UK extended producer responsibility reduces packaging to a recyclable versus non-recyclable test, while e-waste definitions remain contradictory.
* EU packaging and packaging waste regulations from 12 August this year require design for recyclability so printed electronics can be separated out.
* The compliance target is preventing contamination of paper, compost and pulp-and-paper waste streams, not recycling the extracted electronics themselves.
📋 **Clip Abstract** EU packaging and packaging waste regulations from 12 August this year shift the requirement to design for recyclability: printed electronics must be separable so they do not contaminate paper, compost or pulp-and-paper waste streams. UK extended producer responsibility applies a recyclable/non-recyclable test, while contradictory e-waste definitions complicate compliance.
About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped
#DesignForRecyclability, #PackagingWasteContamination, #ExtendedProducerResponsibility, #PrintedElectronicsSeparation, #SustainableElectronics, #AdditiveElectronics
07:50 - 09:31
Why does density separation fail for shredded printed circuits, and what replaces it?
Why does density separation fail for shredded printed circuits, and what replaces it?
During recycling, printed circuits are inevitably shredded, whether in pulping or plastic shredding, leaving many small circuit fragments mixed into the wider waste stream. Existing metallic inks are very thin, very lightweight coatings—benefits of printed electronics—but that also makes the ink behave like the plastic it is attached to, complicating separation.
Density separation is difficult because there is not much difference in density between the printed electronics and the plastic waste it is mixed with. The thin, lightweight metallic coating cannot be readily separated from that stream by density alone, so the waste circuit fragments remain mixed with other plastic waste.
Modifying the ink in the first step to include an iron core, a magnetic core in the middle, allows a magnet to separate printed electronics waste from the waste stream. The approach is shown with a clean-cut plastic example and is said to work the same with pulp and paper, although the video is messier.
In this short video, you can learn:
* Shredding and pulping disperse thin printed-circuit fragments throughout plastic and paper waste streams.
* Thin, lightweight metallic inks behave like the plastic they are attached to, so density separation cannot readily isolate them.
* Adding a magnetic iron core to the ink enables magnet-based separation of printed electronics waste from both plastic and pulp/paper streams.
📋 **Clip Abstract** The clip explains why shredded printed circuits mixed into plastic or paper waste resist density separation: the metallic inks are thin, lightweight coatings that behave like the plastic they sit on. It then describes modifying the ink with an iron magnetic core so a magnet can separate printed electronics waste, with the same approach claimed for pulp and paper.
About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped
#MagneticCoreInk, #DensitySeparation, #PrintedCircuitShredding, #IronCoreInk, #PrintedElectronics, #SustainablePackaging
06:45 - 07:39
How do you make a silver ink magnetic enough to recover without sacrificing conductivity?
How do you make a silver ink magnetic enough to recover without sacrificing conductivity?
The approach starts from ink formulation: ask what can be changed in the material to make recycling easier. It requires metallic levels of conductivity, using silver, and a route to get that silver back out after printing. The proposed particle is a core-shell design: a ferrite or iron core with a silver shell.
In that core-shell particle, silver provides the conductivity and protects the ferrite core. The ferrite core makes the particles magnetic, which is the property needed for recovery. The transcript flags that the magnetic behavior is important, but the detailed explanation is deferred. The design therefore links silver's electrical function with a magnetic recovery mechanism at particle level.
The ink is then printed onto plant-based or paper-based circuits; in principle, it can be printed onto anything. The clip positions this as a less doom-and-gloom direction for sustainable packaging, moving from formulation choices to recyclability. The claimed combination is metallic conductivity from silver plus magnetic core-shell particles, applied to paper or plant-based substrates.
In this short video, you can learn:
* Silver supplies metallic-level conductivity while a ferrite or iron core makes the core-shell particles magnetic for recovery.
* The silver shell protects the ferrite core in the proposed core-shell particle design.
* The formulated ink can be printed onto plant-based or paper-based circuits, and in theory onto anything.
📋 **Clip Abstract** An ink formulation strategy uses core-shell particles with a ferrite or iron core and a silver shell to combine metallic-level conductivity with magnetic recoverability. The ink is printed onto plant-based or paper-based circuits, with the silver providing conductivity and protecting the core while the core enables magnetic recovery.
About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
Sustainable Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/sustainableelectronicsreshaped
#CoreShellParticles, #FerriteSilverInk, #MagneticRecovery, #PaperBasedCircuits, #SustainableElectronics, #PrintedElectronics
Other talks by James Claypole
- The future of smart sustainable packaging for luxury products · Sustainable Electronics RESHAPED 2026 Berlin
- Magnetic separation of silver conductive material for fully biodegradable electronics · Perovskites Innovation Day 2025
- Enabling Sustainable Electronics Through Recyclable Silver Ink · Winter Innovations Festival: Sustainable, Additive, 3D, Flexible, Hybrid & Wearable Electronics (Free-To-Attend) 2023
More highlights from James Claypole
- ▶ What must printed electronics in packaging do to avoid contaminating EU paper, compost and pulp waste streams? · Sustainable Electronics RESHAPED 2026 | Berlin
- ▶ How do you make a silver ink magnetic enough to recover without sacrificing conductivity? · Sustainable Electronics RESHAPED 2026 | Berlin
- ▶ Why does density separation fail for shredded printed circuits, and what replaces it? · Sustainable Electronics RESHAPED 2026 | Berlin
- ▶ Which step, not the ink or separation, is the hardest in a circular printed-electronics ecosystem? · Sustainable Electronics RESHAPED 2026 | Berlin
- ▶ Why does conventional electronic waste recycling completely destroy critical raw materials? · Additive, Sustainable or 3D Electronics Innovations Day 2025
- ▶ Is your "biodegradable" printed electronic device actually poisoning the soil? · Additive, Sustainable or 3D Electronics Innovations Day 2025


