top of page

James Claypole

AilArian

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

James Claypole | AilArian: Which step, not the ink or separation, is the hardest in a circular printed-electronics ecosystem?

10:52 - 13:05

Other snippets from this talk

Summary of the clip:

Which step, not the ink or separation, is the hardest in a circular printed-electronics ecosystem?

A workable circular ecosystem for printed electronics must be convenient, cost-effective, easy to separate and compatible with existing infrastructure. Claypole frames the whole-system build as the challenge, then follows a linear chain: ink, printing working circuits, and smart packaging as the use case. Everyone in the room knows that printing step; the unresolved part sits later in the loop.

The elephant in the room is collection: how do you get used smart packaging back from the people who used it? Claypole calls it the most difficult step without any shadow of a doubt, and by far the biggest single challenge to realizing the system. The honest answer: we do not have all the answers yet.

Once material is returned, known separation technology can detach printed electronics from waste, break it down and split conductive material from pulp and paper waste and components such as LEDs. Those separated streams can re-enter the process. Claypole says this has been shown to work at lab scale, while the collection step remains glossed over and unresolved for scale.

In this short video, you can learn:
* The hardest step in the circular ecosystem is recovering used smart packaging from users, not printing or material separation.
* A viable system needs convenience, cost effectiveness, easy separation and fit with existing infrastructure.
* Separation of conductive material, pulp and paper waste and components such as LEDs has been demonstrated only at lab scale.

πŸ“‹ **Clip Abstract** Claypole maps a circular ecosystem for printed electronics from ink and printed circuits to smart packaging, and identifies collection from users as the dominant unresolved barrier. Lab-scale separation can recover conductive material, pulp and paper waste and components such as LEDs, but the return step remains the system's biggest open problem.

About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#SmartPackaging, #PrintedElectronicsCollection, #ConductiveMaterialSeparation, #PulpAndPaperWaste, #SustainableElectronics, #CircularElectronics

This is a highlight of the presentation:

The future of smart sustainable packaging for luxury products

Sustainable Electronics RESHAPED 2026 | Berlin

​

20-21 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

02:30 - 04:28

What must printed electronics in packaging do to avoid contaminating EU paper, compost and pulp waste streams?

What must printed electronics in packaging do to avoid contaminating EU paper, compost and pulp waste streams?

In the UK, extended producer responsibility frames packaging around a binary recyclable or non-recyclable test, with contradictory statements over what counts as electronic waste. In the EU, the packaging and packaging waste regulations apply from 12 August this year and centre on design for recyclability: whatever is placed in a package must have a route to be separated out.

The crux is contamination: printed electronics added to packaging must be able to come out without contaminating paper waste streams, without contaminating soil waste in terms of compostability, and without contaminating pulp and paper waste streams. The legislation is less about how those extracted materials are subsequently recycled themselves; it is about preventing interactive elements or longer-term sensors from contaminating existing packaging waste streams.

That means the benefit of interactivity and sensing cannot be delivered at the cost of the waste streams. The requirement is separation: printed electronics have to be removable from the package so paper, compost and pulp and paper routes are not contaminated. The regulatory focus stops at that separation step, not at recycling the electronic materials themselves. Contradictory e-waste definitions add to the difficulty.

In this short video, you can learn:
* UK extended producer responsibility reduces packaging to a recyclable versus non-recyclable test, while e-waste definitions remain contradictory.
* EU packaging and packaging waste regulations from 12 August this year require design for recyclability so printed electronics can be separated out.
* The compliance target is preventing contamination of paper, compost and pulp-and-paper waste streams, not recycling the extracted electronics themselves.

πŸ“‹ **Clip Abstract** EU packaging and packaging waste regulations from 12 August this year shift the requirement to design for recyclability: printed electronics must be separable so they do not contaminate paper, compost or pulp-and-paper waste streams. UK extended producer responsibility applies a recyclable/non-recyclable test, while contradictory e-waste definitions complicate compliance.

About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#DesignForRecyclability, #PackagingWasteContamination, #ExtendedProducerResponsibility, #PrintedElectronicsSeparation, #SustainableElectronics, #AdditiveElectronics

07:50 - 09:31

Why does density separation fail for shredded printed circuits, and what replaces it?

Why does density separation fail for shredded printed circuits, and what replaces it?

During recycling, printed circuits are inevitably shredded, whether in pulping or plastic shredding, leaving many small circuit fragments mixed into the wider waste stream. Existing metallic inks are very thin, very lightweight coatingsβ€”benefits of printed electronicsβ€”but that also makes the ink behave like the plastic it is attached to, complicating separation.

Density separation is difficult because there is not much difference in density between the printed electronics and the plastic waste it is mixed with. The thin, lightweight metallic coating cannot be readily separated from that stream by density alone, so the waste circuit fragments remain mixed with other plastic waste.

Modifying the ink in the first step to include an iron core, a magnetic core in the middle, allows a magnet to separate printed electronics waste from the waste stream. The approach is shown with a clean-cut plastic example and is said to work the same with pulp and paper, although the video is messier.

In this short video, you can learn:
* Shredding and pulping disperse thin printed-circuit fragments throughout plastic and paper waste streams.
* Thin, lightweight metallic inks behave like the plastic they are attached to, so density separation cannot readily isolate them.
* Adding a magnetic iron core to the ink enables magnet-based separation of printed electronics waste from both plastic and pulp/paper streams.

πŸ“‹ **Clip Abstract** The clip explains why shredded printed circuits mixed into plastic or paper waste resist density separation: the metallic inks are thin, lightweight coatings that behave like the plastic they sit on. It then describes modifying the ink with an iron magnetic core so a magnet can separate printed electronics waste, with the same approach claimed for pulp and paper.

About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#MagneticCoreInk, #DensitySeparation, #PrintedCircuitShredding, #IronCoreInk, #PrintedElectronics, #SustainablePackaging

06:45 - 07:39

How do you make a silver ink magnetic enough to recover without sacrificing conductivity?

How do you make a silver ink magnetic enough to recover without sacrificing conductivity?

The approach starts from ink formulation: ask what can be changed in the material to make recycling easier. It requires metallic levels of conductivity, using silver, and a route to get that silver back out after printing. The proposed particle is a core-shell design: a ferrite or iron core with a silver shell.

In that core-shell particle, silver provides the conductivity and protects the ferrite core. The ferrite core makes the particles magnetic, which is the property needed for recovery. The transcript flags that the magnetic behavior is important, but the detailed explanation is deferred. The design therefore links silver's electrical function with a magnetic recovery mechanism at particle level.

The ink is then printed onto plant-based or paper-based circuits; in principle, it can be printed onto anything. The clip positions this as a less doom-and-gloom direction for sustainable packaging, moving from formulation choices to recyclability. The claimed combination is metallic conductivity from silver plus magnetic core-shell particles, applied to paper or plant-based substrates.

In this short video, you can learn:
* Silver supplies metallic-level conductivity while a ferrite or iron core makes the core-shell particles magnetic for recovery.
* The silver shell protects the ferrite core in the proposed core-shell particle design.
* The formulated ink can be printed onto plant-based or paper-based circuits, and in theory onto anything.

πŸ“‹ **Clip Abstract** An ink formulation strategy uses core-shell particles with a ferrite or iron core and a silver shell to combine metallic-level conductivity with magnetic recoverability. The ink is printed onto plant-based or paper-based circuits, with the silver providing conductivity and protecting the core while the core enables magnetic recovery.

About the speaker:
* Speaker: James Claypole
* Company: AilArian
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#CoreShellParticles, #FerriteSilverInk, #MagneticRecovery, #PaperBasedCircuits, #SustainableElectronics, #PrintedElectronics


About this talk

β†’ The future of smart sustainable packaging for luxury products Β· James Claypole Β· Sustainable Electronics RESHAPED 2026 Berlin


Other talks by James Claypole


More highlights from James Claypole

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page