Jan Gülink | QubeDot: Can individual microLEDs reach one gigahertz beyond the 170 kHz frame rate set by electronics?
01:43 - 02:50
Other snippets from this talk
Summary of the clip:
Can individual microLEDs reach one gigahertz beyond the 170 kHz frame rate set by electronics?
On the left, a 256-pixel smart platform with a standardized contact ring accepts micro-LED chips of different pixel sizes, pitches and wavelengths, sorted onto our PCB. Its frame rate is 170 kilohertz, fully limited by the electronics, while individual LEDs were measured here up to one gigahertz per LED.
On the right, systems with 64 pixels use the same modular approach. What is displayed here uses five-micron pixel size and five-micron gap, so a 10-micron pitch. This works from UV to green to the red that is shown afterwards.
In the last months and nearly a year, an epitaxy characterization service was also built up, including for optical interconnects, with the measurement set-up. The platform work targets optical data transfer, with the smart platforms developed over a considerable time now.
In this short video, you can learn:
* A 256-pixel platform uses a standardized contact ring and accepts micro-LED chips of different pixel sizes, pitches and wavelengths.
* Individual LEDs were measured up to one gigahertz per LED, even though the 170 kilohertz frame rate is limited by the electronics.
* The 64-pixel system demonstrated a five-micron pixel size and five-micron gap, giving a 10-micron pitch from UV to green to red.
📋 **Clip Abstract** Two smart platforms are presented: a 256-pixel system with a standardized contact ring and a 64-pixel modular system. The measured results cover a 170 kilohertz frame rate limited by electronics, individual LEDs up to one gigahertz, a 10-micron pitch from five-micron pixels and gaps, and a new epitaxy characterization service for optical interconnects.
About the speaker:
* Speaker: Jan Gülink
* Company: QubeDot
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#MicroLEDInterconnects, #TenMicronPitch, #EpitaxyCharacterization, #GigahertzMicroLEDs, #MicroLEDDisplays, #OpticalInterconnects
This is a highlight of the presentation:
MicroLEDs from displays to interconnects – European display production & foundry service
More Highlights from the same talk.
07:18 - 09:21
If transfer yield is 99.99%, what still kills a 4K microLED display, and how are the interconnects proven defect-free?
If transfer yield is 99.99%, what still kills a 4K microLED display, and how are the interconnects proven defect-free?
A 99.99% transfer yield still leaves 2,500 dead pixels on a 4K display, so good micro LEDs alone do not do the trick. This may be more promising for mini LED displays. The best LED process is nothing without proper transfer tools and reliable interconnection. Laser lift off after bonding monolithic chips, or lift for direct micro LED transfer and bond, are offered.
At wafer level, there are around 50 million bumped individual LEDs on a six-inch wafer, meaning 100 million individual bumps. The die size is 14 by 14 micrometers. Small gaps and boundary conditions must be handled. After transfer and bonding, these 14 by 14 micrometer dies look as shown, done via a direct lift bond.
Cross-sections from focused ion beam showcase defect-free interconnects after transfer and bonding. On the right side, you can see the small gaps after transfer. The journey covers laser lift off after bonding monolithic chips or lift for direct micro LED transfer and bond. It also covers bumping micro LEDs and backplane, then transfer with the toolbox.
In this short video, you can learn:
* A 99.99% transfer yield still leaves 2,500 dead pixels on a 4K display, so micro LEDs alone do not suffice.
* A six-inch wafer carries around 50 million bumped individual LEDs, or 100 million individual bumps, with 14 by 14 micrometer dies.
* Focused ion beam cross-sections show defect-free interconnects after direct lift bond transfer, while small gaps remain visible.
📋 **Clip Abstract** At a 99.99% transfer yield, a 4K display still has 2,500 dead pixels, so transfer tools and reliable interconnects are essential. Wafer-level data show around 50 million bumped LEDs on a six-inch wafer, 100 million bumps, and 14 by 14 micrometer dies; focused ion beam cross-sections confirm defect-free interconnects after direct lift bond transfer.
About the speaker:
* Speaker: Jan Gülink
* Company: QubeDot
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform
Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/
#TransferYield, #LaserLiftOff, #DirectLiftBond, #FocusedIonBeam, #MicroLEDDisplays, #SemiconductorPackaging
05:36 - 07:14
Why did micro-LEDs fail to become the universal display technology, and where does 75% of manufacturing sit?
Why did micro-LEDs fail to become the universal display technology, and where does 75% of manufacturing sit?
The announcement was based on LCOS and reflective waveguides rather than micro-LEDs, and that brought the mood down last year. By 2026 there are many diverse players for everyday AR glasses, all offering monochrome micro-LED light engines in real products — think Urealities, think Rokid. China and Taiwan are the centre of gravity for that supply.
Micro-LEDs are not the universal next display technology that everyone thought about five, six or seven years ago, simply because the industry touched manufacturing reality. Most smart glasses are sold with all displays, and most micro-LED light engines aim at an 0.1-inch size, both to have the costs and to be integrated into wearables or the frames of glasses.
Seventy-five percent of the manufacturing capacity for micro-LEDs can be found, for example, in China or Taiwan, while Europe is only in the single digits. That raises two main questions: what about Europe, and what about larger displays if everybody is for the B2C products? Those two questions matter for Europe's role in capacity and for whether micro-LEDs move beyond small light engines.
In this short video, you can learn:
* Seventy-five percent of micro-LED manufacturing capacity can be found in China or Taiwan, with Europe in the single digits.
* Everyday AR glasses from Urealities, Rokid and others offer monochrome micro-LED light engines in real products.
* Micro-LEDs are not the universal next display technology expected five to seven years ago, because the industry touched manufacturing reality.
📋 **Clip Abstract** Last year's LCOS and reflective-waveguide announcement brought the mood down, but by 2026 everyday AR glasses from players such as Urealities and Rokid ship monochrome micro-LED light engines. With 75% of micro-LED manufacturing capacity in China or Taiwan and Europe in single digits, the open questions are Europe's role and whether micro-LEDs can serve larger displays beyond B2C products.
About the speaker:
* Speaker: Jan Gülink
* Company: QubeDot
* Event: Eindhoven 2026
* Location: High Tech Campus, Eindhoven
#MicroLEDLightEngines, #MonochromeMicroLED, #ZeroPointOneInch, #ReflectiveWaveguides, #ARDisplay, #MicroLED
03:31 - 04:44
How do you build a 0.5-inch transparent micro-LED display with 250 segments and over 10 million nits?
How do you build a 0.5-inch transparent micro-LED display with 250 segments and over 10 million nits?
The display goes down to five micrometres of LED size, with roughly 250 segments on a 0.5-inch diagonal, and here more than 10 million nits have been achieved. That combination of segment count, sub-ten-micrometre emitters and extreme luminance defines the device. The architecture places all segments in the middle, with outer contact pads allowing the die to be positioned wherever board space is available.
How does it work at the end? It is a BGA-like component: you know BGA components from electronics, where you can just set one onto your PCB or onto your interposer, and this is kind of the same here. So we have a display with all segments in the middle and some outer contact pads that you can place with every place that you have available.
This can be integrated either in transparent mode, as shown, where you can actually look through the gallium-nitride-on-sapphire transparent monolithic display, or, due to its high brightness, in a classical projection solution. The device is produced in Europe, from the company's own site. Such a high-brightness, transparent monolithic micro-LED layout is what the classical technologies needed here require.
In this short video, you can learn:
* LED size reaches five micrometres, with about 250 segments on a 0.5-inch diagonal and more than 10 million nits achieved.
* The package is BGA-like, with all segments in the middle and outer contact pads placeable wherever PCB or interposer space exists.
* The gallium-nitride-on-sapphire transparent monolithic display also suits classical projection thanks to its brightness, and is produced in Europe.
📋 **Clip Abstract** A 0.5-inch diagonal display with roughly 250 segments, five-micrometre LEDs and over 10 million nits is built as a BGA-like component that drops onto a PCB or interposer. It runs either as a transparent gallium-nitride-on-sapphire monolithic display or, because of its high brightness, in classical projection, with production in Europe.
About the speaker:
* Speaker: Jan Gülink
* Company: QubeDot
* Event: Eindhoven 2026
* Location: High Tech Campus, Eindhoven
#MicroLEDSegments, #GalliumNitrideOnSapphire, #TransparentMonolithicDisplay, #BGAIntegration, #MicroLEDDisplays, #ProjectionDisplays
About this talk
→ MicroLEDs from displays to interconnects – European display production & foundry service · Jan Gülink · TechBlick Innovations Festival July 2026
Other talks by Jan Gülink
- SMILE microLED platforms enabling versatile display solutions · Mini- & Micro-LED Displays: Markets, Manufacturing Innovations, Applications, Promising Start-ups 2023
- Direct-View MicroLED Arrays: Bridging the Gap Between Pixel Pitch and Optical Performance · MicroLED Connect 2026
More highlights from Jan Gülink
- ▶ How do you build a 0.5-inch transparent micro-LED display with 250 segments and over 10 million nits? · MicroLED Connect 2026
- ▶ Why did micro-LEDs fail to become the universal display technology, and where does 75% of manufacturing sit? · MicroLED Connect 2026
- ▶ What does a one-inch, 1920x1200 CMOS-bonded micro-LED display deliver in nits, pitch and refresh rate? · MicroLED Connect 2026
- ▶ Can a solder-bump direct lift place a 14 µm microLED on the final backplane in one transfer step? · MicroLED Connect 2026
- ▶ Can native InGaN solve the microLED red efficiency bottleneck? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ Does scaling microLEDs below one micron inevitably kill efficiency? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ Why is pick-and-place obsolete for high-resolution microLED displays? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups

