Lena Reinke | Panacol-Elosol GmbH: How do you design an electrically conductive adhesive that cures without thermally destroying sensitive perovskite active layers?
00:08:28.000 - 00:10:28.000
Other snippets from this talk
Summary of the clip:
How do you design an electrically conductive adhesive that cures without thermally destroying sensitive perovskite active layers?
Contacting tasks in organic and perovskite solar cells present unique challenges, as the active materials are highly sensitive to elevated processing temperatures. Traditional conductive adhesives often require high-temperature thermal profiles to cure and establish conductive pathways, which can cause thermal degradation of the perovskite crystal structure. Consequently, one-part epoxies that can cure at low temperatures are highly preferred for these integrations.
Beyond low thermal curing profiles, contacting adhesives must maintain reliable electrical conductivity while undergoing mechanical deformation. To achieve this, the adhesive formulation must incorporate high silver loading for conductivity without making the cured polymer brittle. The viscosity must also be finely tuned (around 10,000 mPa·s) to support modern high-throughput deposition methods like jetting.
Measuring the performance of these conductive systems requires evaluating both bulk volume resistivity and microscopic structural integrity. This clip breaks down the formulation parameters of Panacol's Elecolit line, detailing how they achieve low-temperature curing, mechanical bendability, and stable electrical pathways.
In this short video, you can learn:
* The design requirements for electrically conductive adhesives used in heat-sensitive photovoltaic applications.
* Why low-temperature curing is mandatory to prevent thermal degradation of delicate perovskite layers.
* How viscosity tuning allows conductive epoxies with high silver loading to be applied via jetting processes.
📋 **Clip Abstract** This clip highlights the engineering requirements for electrically conductive adhesives used to establish contacts in flexible perovskite and organic solar cells. It explains the importance of low-temperature curing, mechanical flexibility, and precise viscosity tuning to enable jetting deposition.
#ElectricallyConductiveAdhesives, #LowTemperatureCuring, #PerovskiteSolarCells, #JettingDispensing, #PrintedElectronics, #FlexiblePhotovoltaics
This is a highlight of the presentation:
More Highlights from the same talk.
02:45 - 03:54
Can you UV-cure protective barriers on solar cells without destroying the active materials underneath?
Can you UV-cure protective barriers on solar cells without destroying the active materials underneath?
Traditional photovoltaic materials must be shielded from degradation caused by UV radiation, creating a fundamental process paradox. When manufacturing flexible organic or perovskite solar cells, applying protective barrier foils requires an adhesive that can cure rapidly without exposing the sensitive active layers to damaging short-wavelength UV light.
The solution lies in wavelength-selective photoinitiators designed for the near-visible spectrum. By utilizing 405 nm irradiation systems instead of broad-spectrum UV, manufacturers can achieve rapid cross-linking of the adhesive while protecting the underlying semiconductor layers. This ensures high-throughput roll-to-roll processing without compromising device efficiency.
Hoenle Adhesives pairs these specialized formulations with high-intensity air-cooled LED curing units. These stackable line-curing systems deliver powerful milliwatt-scale output at targeted wavelengths, eliminating the need for complex water cooling while maintaining high processing speeds.
In this short video, you can learn:
* How to resolve the paradox of UV-curing adhesive barriers on UV-sensitive photovoltaic devices.
* The role of narrow-band 405 nm light sources in preventing photo-degradation during manufacturing.
* The integration of air-cooled LED line-curing systems into continuous industrial production.
📋 **Clip Abstract** This clip explains how to safely use photopolymerization to seal flexible solar cells by shifting the curing wavelength to 405 nm. By avoiding short-wave UV, manufacturers can rapidly bond barrier foils without degrading sensitive active layers.
#WavelengthSelectiveCuring, #Photoinitiators, #RollToRollProcessing, #BarrierFoils, #PerovskiteSolarCells, #FlexibleElectronics
11:18 - 13:45
How do you balance high electrical conductivity with low-temperature curing for plastic substrates?
How do you balance high electrical conductivity with low-temperature curing for plastic substrates?
Electrically Conductive Adhesives (ECAs) rely on silver-filled percolative networks to achieve metallic-like performance in flexible circuits. While silver remains the industry standard despite environmental and cost concerns, achieving low volume resistivity requires high filler loading to ensure reliable particle-to-particle contact across the polymer matrix.
This formulation must also balance competing thermodynamic requirements during cure. For temperature-sensitive polymer substrates like PET used in flexible PCBs, curing must occur at low temperatures (as low as 80 degrees Celsius), which naturally extends processing times; however, raising the temperature to 150 degrees Celsius can accelerate cross-linking to under a minute.
These advanced silver-filled systems are engineered to yield a volume resistivity of 10 to the power of minus four Ohm-centimeters. This provides robust electrical pathways capable of withstanding subsequent reflow soldering temperatures and severe mechanical bending without losing conductivity.
In this short video, you can learn:
* The mechanics of silver-filled percolation conduction in high-performance polymer adhesives.
* The thermodynamic trade-offs between low-temperature curing at 80°C and ultra-fast cures at 150°C.
* The mechanical resilience of conductive paths on copper foil under extreme bending and creasing.
📋 **Clip Abstract** This clip explores the performance metrics of silver-filled electrically conductive adhesives designed for flexible electronics. It highlights the balance between low volume resistivity, mechanical bending tolerance, and low-temperature thermal curing profiles.
#ElectricallyConductiveAdhesives, #LowTemperatureCuring, #PercolativeNetworks, #VolumeResistivity, #FlexibleElectronics, #PrintedElectronics
06:24 - 08:00
Why are the most flexible polymer barriers the worst at blocking moisture?
Why are the most flexible polymer barriers the worst at blocking moisture?
The physical chemistry of barrier adhesives presents an uncompromising trade-off between moisture protection and mechanical flexibility. Water Vapor Transmission Rate (WVTR) is highly dependent on cross-linking density; as a polymer network becomes more tightly knit, the free volume decreases, leaving smaller voids for tiny water molecules to diffuse through.
Conversely, achieving high mechanical flexibility or high elongation at break requires a looser polymeric network with lower cross-linking density. While a highly flexible adhesive prevents cracking under bending strain, the larger molecular gaps inherently allow water vapor to permeate much more easily, diminishing its performance as a barrier seal.
Understanding this inverse relationship is vital when selecting materials for flexible electronics and perovskite photovoltaics. To optimize both properties, engineers must balance chemical base formulations, cross-linking density, and thin-film geometry, as thinner adhesive layers can maintain flexibility even with stiffer, low-permeability polymers.
In this short video, you can learn:
* The inverse relationship between a polymer's cross-linking density and its Water Vapor Transmission Rate (WVTR).
* Why high mechanical flexibility in adhesives typically leads to higher moisture permeation.
* How thin-film packaging geometry can mitigate the brittleness of highly cross-linked, high-performance barrier materials.
📋 **Clip Abstract** This clip breaks down the fundamental material science conflict between low water vapor permeability and high mechanical flexibility in barrier adhesives. It explains how cross-linking density dictates free volume, forcing a design compromise between moisture sealing and bending performance.
#WaterVaporTransmissionRate, #BarrierAdhesives, #CrossLinkingDensity, #ThinFilmPackaging, #FlexibleElectronics, #PerovskitePhotovoltaics