Lukas Werft | Fraunhofer IZM: Why did liquid metal ink feedstock jump from €600–€700 to nearly €3,000 per kilo in four years?
39:57 - 40:52
Other snippets from this talk
Summary of the clip:
Why did liquid metal ink feedstock jump from €600–€700 to nearly €3,000 per kilo in four years?
In the last four or five years, the material price rose about five times, according to the speaker. Four years ago it was €600 or €700 per kilo; now it is nearly €3,000 per kilo. That shift is framed as a feedstock-cost problem rather than a printing-process issue.
The supply side is concentrated: China accounts for 96% of the gallium entering the cycle, the transcript states. Because of that concentration, the market in Asia is “not so easy” at the moment. Availability is hoped to improve in the next times, but the current material price remains a constraint.
For printed stretchable electronics, this feedstock escalation changes the commercial context around material supply. The clip ties price and availability to gallium supply rather than to a printing or formulation step. It gives no substitution route; it only flags better availability as a hope.
In this short video, you can learn:
* Material price rose roughly fivefold in four or five years, from €600–€700 to nearly €3,000 per kilo.
* China supplies 96% of the gallium entering the cycle, concentrating supply risk.
* The Asian market is currently difficult, and better material availability is only hoped for in the next times.
📋 **Clip Abstract** The clip explains a roughly fivefold rise in material price, from €600–€700 to nearly €3,000 per kilo over four or five years. It attributes the pressure to China’s 96% share of gallium entering the cycle and to a currently difficult Asian market.
About the speaker:
* Speaker: Lukas Werft
* Company: Fraunhofer IZM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#GalliumSupply, #LiquidMetalInk, #MaterialPrice, #StretchableElectronics, #PrintedElectronics, #AdditiveElectronics
This is a highlight of the presentation:
Liquid Metal Inks for Highly Reliable Printed Stretchable Electronics: Formulation, Rheology, and Wetting Control
More Highlights from the same talk.
02:01 - 03:29
Why do copper meanders and silver-particle inks fail under repeated strain, while remaining useful for one-time deformation?
Why do copper meanders and silver-particle inks fail under repeated strain, while remaining useful for one-time deformation?
Copper structures can be patterned as meanders and used as bending structures rather than truly stretchable conductors. The resulting conductive track is stretchable, but it is framed as more useful for one-time deformation. It can be deformed up to 300% elongation without a tangent resistance, according to the presented result.
Under multiple deformation, fracture occurs after a really small amount: maybe 100 or 1,000 cycles, but only 10% elongation. Copper inks or silver inks are described as the most material used at the moment for stretchable electronics. Many process parameters are available for these inks.
Really tiny particles are said to give a good stretchable material, but the provided clip stops before explaining the particle-size mechanism further. The remaining emphasis stays on copper inks, silver inks, and the many process parameters available for stretchable electronics.
In this short video, you can learn:
* Copper meanders behave as bending structures and are more suited to one-time deformation than repeated stretching.
* The copper track can reach 300% elongation without a tangent resistance, but repeated deformation fractures at maybe 100 or 1,000 cycles and only 10% elongation.
* Copper inks or silver inks are the most material used at the moment for stretchable electronics, and really tiny particles are said to give good stretchability.
📋 **Clip Abstract** Copper meanders form conductive tracks that can be deformed up to 300% elongation without a tangent resistance, but they are framed as best for one-time deformation. Repeated deformation fractures after maybe 100 or 1,000 cycles at only 10% elongation, while copper inks or silver inks remain the most material used at the moment, with tiny particles giving good stretchability.
About the speaker:
* Speaker: Lukas Werft
* Company: Fraunhofer IZM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#CopperMeanders, #SilverInks, #StretchableConductiveTracks, #FractureStrainCycling, #PrintedElectronics, #StretchableElectronics
15:11 - 17:20
How does a 5-nanometre oxide skin turn an unwettable liquid metal into a printable, copper-wetting paste?
How does a 5-nanometre oxide skin turn an unwettable liquid metal into a printable, copper-wetting paste?
The oxide layer on the liquid metal surface builds in milliseconds and passivates to a thickness of about five nanometres. Often introduced as the material's least attractive property, that skin is stable whenever the metal is at rest — which is exactly why structuring processes behave well: the liquid metal never touches the polymer or the contact parts directly.
Electrical contact is made through copper or other metals embedded in the polymer. On its own, the liquid metal would not wet the copper. The thin oxide film changes that: it acts as a bridge between the two surfaces, an interlayer best described as liquid–solid–solid, sitting between the bulk metal and the pad.
That oxide is mostly gallium two, oxygen three — Ga2O3 — and it wets copper and the polymer surface well. Because the skin governs wetting, the material's properties can be tuned: the oxide becomes the handle for getting more adherent, more reliable contact rather than a defect to be stripped away.
In this short video, you can learn:
* The native oxide grows in milliseconds and passivates at up to five nanometres, remaining stable while the metal is not in movement.
* Because the oxide bridges liquid metal to metal pads embedded in polymer, the metal wets copper it would otherwise refuse.
* The oxide is predominantly Ga2O3, and its wetting behaviour is the lever for tuning adhesion to copper and to polymer.
📋 **Clip Abstract** A native oxide a few nanometres thick, formed within milliseconds, is what makes liquid metal printable and reliable rather than merely reactive. Acting as a liquid–solid–solid bridge, the gallium oxide skin lets the metal wet copper pads and polymer surfaces it would otherwise reject.
About the speaker:
* Speaker: Lukas Werft
* Company: Fraunhofer IZM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#LiquidMetalInk, #GalliumOxideSkin, #WettingControl, #StretchableCircuits, #PrintedElectronics, #AdditiveElectronics
10:26 - 12:23
Why must a screen-printing ink shear-thin under the squeegee yet not keep flowing for ten minutes?
Why must a screen-printing ink shear-thin under the squeegee yet not keep flowing for ten minutes?
Rheology here means shear-dependent viscosity. A Newtonian fluid has constant viscosity across shear rate, while screen printing wants shear-thinning behavior. At the high shear rate under the squeegee, viscosity drops, helping material enter the mesh. In the mesh, it first appears thicker with holes until the flowing part of screen printing builds the print.
When the squeegee passes over the screen, the material thins again and releases onto the substrate. That is good behavior, but time-dependent properties also matter. The material should thin, yet not remain thinner for the next ten minutes. If it does, it floats over the substrate. The physics behind the behavior must be understood to manipulate it.
The screen-printing ink therefore has to balance shear-dependent viscosity with time-dependent properties. High shear lowers viscosity for entering the mesh, but after the squeegee the ink must stop being thin instead of continuing to flow over the substrate. The problem is physical: identify the mechanism behind the behavior and manipulate it. That is the core rheology-control question for the formulation.
In this short video, you can learn:
* A Newtonian fluid has constant viscosity over shear rate, whereas screen printing requires shear-thinning behavior.
* High shear lowers the ink viscosity so it can enter the mesh, and the squeegee thins it again to release onto the substrate.
* Time-dependent properties matter because an ink that stays thinner for ten minutes can float over the substrate, so the underlying physics must be understood and manipulated.
📋 **Clip Abstract** The clip explains shear-dependent viscosity in screen-printing inks: a Newtonian fluid is constant, but the process wants shear-thinning so high shear lowers viscosity for mesh entry and squeegee passage releases material onto the substrate. It stresses time-dependent properties, because an ink should not remain thinner for ten minutes and float over the substrate; the physics behind the behavior must be understood to manipulate it.
About the speaker:
* Speaker: Lukas Werft
* Company: Fraunhofer IZM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#ScreenPrintingRheology, #ShearThinningInks, #SqueegeeShearRate, #TimeDependentFlow, #PrintedElectronics, #StretchableElectronics
Links to this speaker's talk page and other highlights appear here.


