Marcin Ratajczak | Inuru: What environmental and mechanical stress thresholds can printed smart surface labels sustain during in-mold processing?
06:46 - 08:36
Other snippets from this talk
Summary of the clip:
What environmental and mechanical stress thresholds can printed smart surface labels sustain during in-mold processing?
The labels are built for in-mold integration: they sustain temperatures up to 200°C during molding and remain operable down to -20°C, so the same device tolerates the thermal swing of the process and the cold of the application. They also withstand 100 bar of atmospheric pressure, which makes them ready for laminating. Placing a label in a mold and pressing it together with a product puts electronics inside without new processes.
Waterproofing is described as extremely important, and the demonstrated test is immersion in salt water for seven days, or 24 hours at room temperature, after which nothing happens to the label. Chlorine water is still being tested to improve resistance, though the speaker notes this is not necessary for the current application. The barrier requirement is therefore framed around real exposure rather than a lab spec.
Mechanically, the labels are bendable, which is what makes them roll-to-roll compatible and allows direct application onto bottles. They also survive mechanical stress well enough to be sewable, so the same electronic label can be sewn directly into fashion. The hardware itself is small — a unit shown next to an iPhone 7 lights up — and the approach is presented as versatile rather than tied to one product format.
In this short video, you can learn:
* In-mold processing is survivable because the printed labels withstand molding temperatures up to 200°C, operation down to -20°C and 100 bar of atmospheric pressure.
* Salt-water immersion for seven days, plus 24 hours at room temperature, leaves the labels unaffected, while chlorine-water testing continues as an optional improvement.
* Bendability delivers roll-to-roll compatibility, bottle application and sewability, so one label format spans molding, laminating and fashion.
📋 **Clip Abstract** Printed electronic labels are shown to survive in-mold temperatures up to 200°C, operation to -20°C, 100 bar laminating pressure, seven-day salt-water immersion and sewing into textiles. The claim is that existing molding, laminating and roll-to-roll processes can carry the electronics without any new process being introduced.
About the speaker:
* Speaker: Marcin Ratajczak
* Company: Inuru
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#InMoldElectronics, #SaltWaterImmersion, #SewableLabels, #LaminatingPressure, #PrintedElectronics, #FlexibleElectronics
This is a highlight of the presentation:
Printed Electronics Solutions: What it Takes to Bring Electronics Into Everyday Products
More Highlights from the same talk.
04:59 - 06:33
Why do roughly 50% of hybrid flexible electronics fail during standard roll-to-roll packaging application?
Why do roughly 50% of hybrid flexible electronics fail during standard roll-to-roll packaging application?
The failures begin immediately because the devices are hybrid systems: electronics placed on any type of substrate. When you bend and apply them, roughly 50% tend to break, depending on the device, including NFCs. That incompatibility is with standard processes, not a marginal handling issue. The transcript's point is direct: you cannot just put these devices onto roll-to-roll equipment, which is how electronics—including printed electronics—are handled today.
If integration is needed, costly manual application processes are required, and those processes usually double the cost for the stuff that is bought in. In some cases the multiplier is even higher. For electroluminescence, which has been around for some years, a neat label may be available at a good price, but the integration volume is at least double, and that prohibits the technology from getting into the market at all.
The electronics are also not versatile. You cannot change them the way marketing wants. Changing with LEDs, for example, requires making the product thick and having a lot of complex production processes. No custom-made electronics on demand existed so far, according to the clip. Those constraints sit alongside the breakage and manual-integration penalties that keep hybrid devices out of standard roll-to-roll packaging application.
In this short video, you can learn:
* Roughly 50% of hybrid devices break when bent and applied, depending on device type, including NFCs.
* Standard roll-to-roll equipment cannot accept these hybrid devices directly, so integration falls back to costly manual application.
* Manual integration usually doubles bought-in cost and can be higher; for electroluminescence the integration volume is at least double, blocking market entry.
📋 **Clip Abstract** Hybrid flexible electronics fail at the start because electronics on any substrate break at roughly 50% when bent and applied, including NFCs, and cannot be placed directly onto roll-to-roll equipment. Costly manual application then doubles or more the bought-in cost, while electroluminescence's at-least-double integration volume and limited versatility keep such devices from market entry.
About the speaker:
* Speaker: Marcin Ratajczak
* Company: Inuru
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#RollToRollPackaging, #ManualApplicationCost, #HybridElectronicsBreakage, #ElectroluminescenceIntegration, #PrintedElectronics, #FlexibleElectronics
00:03:16.505 - 00:05:01.145
Why does conventional OLED manufacturing require $5 billion fabs while digital printing needs zero shadow masks?
Why does conventional OLED manufacturing require $5 billion fabs while digital printing needs zero shadow masks?
Conventional OLED manufacturing relies on high-vacuum thermal evaporation and photolithography-based patterning, requiring massive capital expenditures up to $5 billion per fab. This rigid semiconductor-like approach scales well only at extreme volumes of identical units. Changing a display or emission shape requires expensive custom fine metal shadow masks costing between $100,000 and $10 million, preventing rapid prototyping or low-volume customization.
Inuru bypasses this limitation by utilizing a digital additive inkjet printing process to deposit functional organic light-emitting layers. This method eliminates the need for masks, filters, or high-vacuum chambers, enabling a digital-to-print workflow where designs can be updated instantly via a standard digital file. The resulting flexible, surface-emissive light sources are highly efficient, operating at a low threshold voltage of just 2.9 volts.
By transitioning OLED fabrication from high-vacuum evaporation to atmospheric or controlled-environment inkjet printing, the cost of custom-shaped display elements is minimized. This structural shift allows for "volume one" production, unlocking personalized surface lighting applications across medical packaging, smart consumer goods, and wearable technology.
In this short video, you can learn:
* How traditional vacuum thermal evaporation (VTE) creates massive financial barriers for custom display geometries.
* The mechanics of digital additive inkjet printing for depositing functional, low-voltage (2.9V) organic light-emitting layers.
* Why eliminating fine metal shadow masks enables zero-tooling-cost customization from a simple digital design file.
📋 **Clip Abstract** This clip analyzes the core manufacturing limitations of conventional vacuum-evaporated OLED displays and explains how digital inkjet printing eliminates costly shadow masks. By transitioning to a mask-free additive process, Inuru enables highly efficient, low-voltage flexible surface lighting customizable from volume one.
#InkjetPrintedOLED, #VacuumThermalEvaporation, #FineMetalMask, #FlexibleOLED, #PrintedElectronics, #FlexibleElectronics
11:05 - 13:32
How does inkjet-printed OLED compare to evaporated OLED in tooling costs, turnaround time, and end-of-life recyclability?
How does inkjet-printed OLED compare to evaporated OLED in tooling costs, turnaround time, and end-of-life recyclability?
Standard evaporated OLEDs lock a product into a fixed form: changing it means buying an evaporation mask that costs at least $200,000 and running a setup that typically takes two to six months. The freeform printed OLED removes that constraint, so a battery symbol or a company design can light up on any surface without rebuilding the process.
Because the OLED is inkjet printed, drop-on-demand deposition makes the process scalable rather than mask-bound. A changed design lands in one day at best, five days in current practice, against months for evaporation. At volume the cost target is the price band of packaging today — not literally as cheap, but low enough to be viable for mass single-use products.
Recyclability is designed in: single-use labels go into the normal packaging trash and separate within the recycling stream, and what remains is recycled or burnt with no hazardous material left behind. Construction is lightweight materials, organic LEDs and single-use batteries that work similar to fruit; a rechargeable variant, the speaker notes, is a different type of ball game.
In this short video, you can learn:
* An evaporation mask alone costs at least $200,000, and standard OLED process setup runs two to six months.
* Inkjet drop-on-demand deposition cuts a design change to one day at best, five days in current practice, and scales toward packaging-level pricing.
* The single-use printed label is built to enter normal packaging trash, separate in the recycling stream, and leave no hazardous material when recycled or burnt.
📋 **Clip Abstract** Freeform inkjet-printed OLEDs trade the $200,000 evaporation mask and two-to-six-month setup of standard OLEDs for drop-on-demand deposition, with design changes in one day at best and five days today. The same build is engineered for end of life: single-use labels enter the packaging recycling stream, and the lightweight organic LED and single-use battery materials leave no hazardous residue.
About the speaker:
* Speaker: Marcin Ratajczak
* Company: Inuru
* Event: Displays & Lighting 2021: Innovations & Market Trends
Join TechBlick to learn about the cutting edge in the display industry
https://www.techblick.com/
#FreeformOLED, #InkjetPrintedOLED, #EvaporationMask, #RecyclableLabels, #FlexibleElectronics, #PrintedElectronics
About this talk
→ Printed Electronics Solutions: What it Takes to Bring Electronics Into Everyday Products · Marcin Ratajczak · Displays & Lighting: Innovations & Market Trends 2021
Other talks by Marcin Ratajczak
- Seamless Integration of Printed OLEDs into Smart Packaging and Consumer Surfaces · Electronics RESHAPED USA 2026
- Affordable Surface Lighting for Visual Interfaces through printed OLED technology · The Future of Electronics RESHAPED | Berlin 2023
More highlights from Marcin Ratajczak
- ▶ Why does conventional OLED manufacturing require $5 billion fabs while digital printing needs zero shadow masks? · The Future of Electronics RESHAPED 2023 Berlin
- ▶ How can a $10 million printing line compete with a traditional $200 million OLED fabrication facility? · The Future of Electronics RESHAPED 2023 Berlin
- ▶ What are the ultimate limits of lifetime, barrier encapsulation, and reliability for printed organic light sources? · The Future of Electronics RESHAPED 2023 Berlin


