top of page

Mario Kohl

Fraunhofer IFAM

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Mario Kohl | Fraunhofer IFAM: How does hybrid manufacturing combine printed conductive tracks with conventional SMD components to increase design and production flexibility?

31:50 - 33:52

Other snippets from this talk

Summary of the clip:

How does hybrid manufacturing combine printed conductive tracks with conventional SMD components to increase design and production flexibility?

Hybrid manufacturing mixes printed electronics with conventional assembly rather than printing every component. The process chain starts with a normal ECAD design, then conductor tracks are printed. Screen printing, dispensing or stencil printing can also deposit electrically conductive material. A standard pick-and-place design and pick-and-place process follow. On the right, printed tracks carry conventional SMD parts. Potting can also be added.

One idea is greater flexibility for first PCB designs. Digital approaches such as dispensing suit first trials, then the same PCBs can convert to screen printing for higher amounts. That combines printing and conventional worlds. The approach also applies to printing resistors and capacitors, though the mix of both worlds is described as a very good idea. It supports more flexible first designs across the process chain.

Another approach is moving to flexible foils as the substrate. This is more requested in automobile applications, for example, and also in other branches. The printed tracks can receive conventional SMD parts, and potting can also be added. The process chain remains ECAD design, printed conductor tracks, electrically conductive material, then standard pick-and-place. Hybrid manufacturing therefore links printed conductive structures with conventional SMD placement and supports PCB designs and flexible foil formats.

In this short video, you can learn:
* Hybrid manufacturing combines printed conductor tracks with conventional SMD pick-and-place assembly.
* Dispensing supports first trials before converting the same PCBs to screen printing for higher amounts.
* Flexible foils are increasingly requested as substrates for automobile and other applications.

📋 **Clip Abstract** Hybrid manufacturing combines printed conductor tracks with conventional SMD components to increase flexibility in early PCB designs. The process chain uses ECAD design, screen printing, dispensing or stencil printing, electrically conductive material, pick-and-place, and can move to flexible foils for automobile applications.

About the speaker:
* Speaker: Mario Kohl
* Company: Fraunhofer IFAM
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#HybridManufacturing, #ScreenPrinting, #SMDComponents, #FlexibleFoils, #PrintedElectronics, #AdditiveElectronics

This is a highlight of the presentation:

Screen Printing Technology For Printed Electronics Manufacturing

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

04:48 - 06:22

Where does a 20% battery-production energy saving actually come from?

Where does a 20% battery-production energy saving actually come from?

The targeted 20% reduction in overall energy consumption is built from three contributions: around 20% less solvent that must be evaporated, around 10% less coated area through near-net-shape printing, and around 20% higher drying efficiency. Together these give around 40% reduced drying energy, which translates into roughly 20% energy-cost savings.

Those reductions are intended to lower OPEX and, through shorter drying areas or shorter drying furnaces, allow work in smaller areas and lower CAPEX. This is framed as a forecast tied to machinery arriving at the end of this year, not an already measured result.

For the printed-electrode printing platform, the plan uses a screen printer for double-sided coatings of flexible substrates. The energy case therefore combines reduced solvent, near-net-shape printing and higher drying efficiency on one platform, with the 20% overall energy reduction and 40% drying-energy reduction as stated targets.

In this short video, you can learn:
* About 20% less solvent to evaporate, about 10% less coated area from near-net-shape printing and about 20% higher drying efficiency combine into around 40% reduced drying energy.
* The resulting overall energy-consumption reduction is around 20%, stated as roughly 20% energy-cost savings and lower OPEX.
* Shorter drying areas or furnaces are intended to enable smaller footprints and lower CAPEX, with the machinery expected at the end of this year.

📋 **Clip Abstract** The 20% overall energy reduction comes from around 20% less solvent evaporation, around 10% less coated area via near-net-shape printing and around 20% higher drying efficiency, producing around 40% reduced drying energy and roughly 20% energy-cost savings. Shorter drying areas or furnaces are intended to lower OPEX and CAPEX, with the machinery described as a forecast for arrival at the end of this year and the printed-electrode platform using a screen printer for double-sided coatings on flexible substrates.

About the speaker:
* Speaker: Mario Kohl
* Company: Fraunhofer IFAM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#ScreenPrinting, #NearNetShapePrinting, #SolventEvaporationReduction, #DryingEnergySavings, #PrintedElectronics, #BatteryProduction

10:39 - 12:23

Can thick electrodes be printed without cracking or killing C-rate?

Can thick electrodes be printed without cracking or killing C-rate?

Printing a 300 micron electrode rather than 30 microns changes how much solvent must leave the structure, and doing it wrong produces cracking. The answer is multilayer printing: solvent is extracted step by step between passes instead of all at once from a single thick layer.

The trade-off is explicit: thicker layers mean more capacity, but current-rate capability falls because ions and electrons travel longer distances — the difference between a 30 micron and a 300 micron electrode. That penalty is the core problem the printing approach has to solve.

Two levers are being worked on: a graduated design through the electrode thickness, and different recipes for the different printing steps. Multilayer printing makes both possible, because each pass can be formulated and deposited independently rather than one recipe serving the whole 300 micron stack.

In this short video, you can learn:
* Multilayer printing extracts solvent step by step, which is how cracking is avoided when electrodes are thickened.
* Moving from 30 to 300 microns raises capacity but costs current-rate capability because ion and electron paths grow longer.
* Graduated electrode designs and separate recipes per printing step are the routes being pursued to recover rate performance.

📋 **Clip Abstract** Thick electrodes buy capacity but bring solvent removal and rate limits. Multilayer printing with stepwise solvent extraction, graduated designs and per-pass recipes attacks both.

About the speaker:
* Speaker: Mario Kohl
* Company: Fraunhofer IFAM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#ThickElectrodePrinting, #MultilayerScreenPrinting, #SolventRemovalControl, #GraduatedElectrodeDesign, #PrintedElectronics, #BatteryCellProduction

08:36 - 10:10

How much of a conventional battery electrode is inactive dead volume?

How much of a conventional battery electrode is inactive dead volume?

LFP energy density is not as good as NMC among the main active materials, but converting conventional designs into cyclone electrodes can lift LFP to another energy-density level relative to NMC. The comparison hinges on electrode thickness and how much electrode volume actually stores energy.

In nominal or conventional design, electrodes are quite thin. In that architecture only around 50% to 60% of the volume is used for storage. Preparing films in a thicker way can optimize these amounts to nearly 90%, changing the balance between active storage volume and inactive material.

Thicker films reduce the relative share of current collectors and separators. These are inactive materials needed for the battery, and avoiding them as much as possible helps energy density. The gain comes from using more of the electrode volume for storage rather than inactive components.

In this short video, you can learn:
* Conventional thin electrodes use only about 50% to 60% of their volume for storage.
* Thicker films can raise storage utilization to nearly 90%.
* Cyclone electrode designs aim to lift LFP energy density relative to NMC by reducing inactive current collectors and separators.

📋 **Clip Abstract** Conventional battery electrodes are thin, with only about 50% to 60% of volume used for storage. Converting designs into cyclone electrodes and preparing thicker films can optimize storage to nearly 90%, reducing inactive current collectors and separators and helping lift LFP energy density relative to NMC.

About the speaker:
* Speaker: Mario Kohl
* Company: Fraunhofer IFAM
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#CycloneElectrodes, #ThickerElectrodeFilms, #LFPEnergyDensity, #InactiveMaterialReduction, #BatteryElectrodes, #ScreenPrinting

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page