top of page

Ryota Shimizu

Satosen Co.,Ltd

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Ryota Shimizu | Satosen Co.,Ltd: How can the resistance change in the liquid metal-based PCB be used for strain sensing?

00:11:41 - 00:12:48

Other snippets from this talk

Summary of the clip:

How can the resistance change in the liquid metal-based PCB be used for strain sensing?

The presenter highlights the results of extensive durability testing, including bending, twisting, and stretching, demonstrating the robustness of the liquid metal-based stretchable PCB. Notably, after 250,000 stretching cycles, the PCB maintains its functionality. This durability stems from the self-healing properties of the liquid metal, which flows into cracks that form in the silver paste, maintaining electrical conductivity.

The presenter then focuses on the correlation between resistance change and strain level in the liquid metal-based PCB. Data from the 250,000-cycle stretching test reveals a strong coupling between the applied strain and the measured resistance. As the PCB stretches, the resistance increases, and as it returns to its original position, the resistance decreases, creating a synchronized wave pattern.

This close correlation suggests that the stretchable PCB can function not only as a mechanical and electrical support but also as a strain sensor. By monitoring the resistance changes, it is possible to detect and quantify the strain experienced by the PCB. This opens up possibilities for applications requiring real-time strain monitoring, such as wearable sensors and structural health monitoring.

In this short video, you can learn:
* The durability of the liquid metal-based PCB under various deformation modes.
* The correlation between resistance change and strain level.
* The potential of the PCB to function as a strain sensor.
šŸ“‹ **Clip Abstract:** This segment presents data demonstrating the durability and strain-sensing capabilities of the liquid metal-based stretchable PCB. It highlights the strong correlation between resistance change and strain, suggesting potential applications in real-time strain monitoring.
šŸ”— Link in comments šŸ‘‡

#LiquidMetalPCB, #StretchableElectronics, #StrainSensing, #SelfHealingMaterials, #WearableSensors, #FlexibleElectronics

This is a highlight of the presentation:

Next Generation of Stretchable PCB with Liquid Metal

The Future of Electronics RESHAPED USA | Boston 2025

​

​

UMass Boston

Organised By:

TechBlick

​

More Highlights from the same talk.

03:19 - 05:17

What hidden failure mechanism causes stretchable silver paste conductors to gradually drift to electrical open?

What hidden failure mechanism causes stretchable silver paste conductors to gradually drift to electrical open?

A standard stretchable PCB test sample used a stretchable substrate with stretchable silver paste. The conductor was repeatedly stretched to 20% while resistance was monitored. Each stretch raised resistance; release lowered it, but it did not fully return to the initial value. The Y-axis resistance and X-axis strain cycles showed cumulative damage, not just the up-and-down signal.

The serious problem is the gradual upward shift in resistance, because that shift finally ends in an electrical open. Repeated deformation accumulates damage on the conductor, and crack formation is the root cause. As cracks develop and accumulate, conductivity decreases and electrical pathways become unstable. The clip calls this exactly what killed stretchable electronics.

The photos make the mechanism visible. Before repeated stretching, the left image shows no crack on the conductor surface. After repeated stretching, the right image shows so many cracks on the surface. Those cracks explain why conductivity falls and pathways become unstable, connecting the measured resistance drift to the final electrical open.

In this short video, you can learn:
* Repeated stretching to 20% raised resistance and release did not fully restore the initial value.
* Crack formation and accumulation were identified as the root cause of conductivity loss and unstable pathways.
* Before-and-after photos showed no surface cracks initially and many cracks after repeated stretching.

šŸ“‹ **Clip Abstract** A stretchable substrate with stretchable silver paste was cycled to 20% strain while resistance was monitored. The resistance showed a gradual upward shift that ended in an electrical open, with crack formation identified as the root cause.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
šŸ“… Save the date: 9 and 10 June 2027
šŸ“ Mountain View, California (Silicon Valley)
šŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
šŸ“… Save the date: 20 and 21 October 2027
šŸ“ Berlin, Germany
šŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#StretchableSilverPaste, #ResistanceDrift, #CrackFormation, #ElectricalOpen, #StretchableElectronics, #PrintedElectronics

08:17 - 10:46

Why use a hybrid silver paste and liquid metal structure instead of liquid metal alone for scalable stretchable PCBs?

Why use a hybrid silver paste and liquid metal structure instead of liquid metal alone for scalable stretchable PCBs?

The approach rests on three principles: a simple process, a hybrid structure, and compatibility with existing PCB manufacturing. The process is intentionally simple so it can integrate into existing PCB production infrastructure. In practice, the conductor such as silver paste is printed as its barrier layer, then liquid metal is applied. The stated operations are just print and spray.

Silver paste is the primary conductor carrying the electrical signal, while liquid metal serves as a support conductor. This hybrid structure gives robustness against repeated stretching. It also reduces sensitivity to variation in the amount of liquid metal, because conductivity does not rely only on liquid metal; the silver paste remains there to support stable conductivity under strain.

The hybrid also minimizes liquid metal consumption, which is described as facing global supply-shortage risk. A liquid-metal-only conductor may have better stretchability, but that is not the stated goal. The design intentionally accepts a small performance trade-off in exchange for scalability, manufacturability, and repeatable production feasibility.

In this short video, you can learn:
* Silver paste acts as the primary signal conductor while liquid metal is a support conductor.
* The hybrid reduces sensitivity to liquid-metal amount variation and minimizes liquid-metal consumption.
* The process intentionally accepts a small performance trade-off for scalability, manufacturability and repeatable production feasibility.

šŸ“‹ **Clip Abstract** A scalable stretchable PCB approach uses a simple print-and-spray process compatible with existing PCB manufacturing: printed silver paste forms the primary conductor and liquid metal acts as a support conductor. The hybrid is presented as robust to repeated stretching, less sensitive to liquid-metal variation, and able to minimize liquid-metal consumption, intentionally accepting a small performance trade-off for manufacturability.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
šŸ“… Save the date: 9 and 10 June 2027
šŸ“ Mountain View, California (Silicon Valley)
šŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
šŸ“… Save the date: 20 and 21 October 2027
šŸ“ Berlin, Germany
šŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#LiquidMetalWiring, #SilverPasteConductor, #PrintAndSpray, #StretchablePCB, #PrintedElectronics, #AdditiveElectronics

05:15 - 07:39

Can a liquid metal conductor survive 250,000 stretch cycles without resistance drift?

Can a liquid metal conductor survive 250,000 stretch cycles without resistance drift?

Eutectic gallium indium stays liquid at room temperature, so it can restore an electrical pathway after mechanical deformation. Unlike a solid conductor, it does not have to resist cracks; because it is liquid, it can reconnect after being deformed. This is a fundamentally different approach for stretchable electronics.

On the durability graph, the liquid metal conductor is the blue line. It shows the same initial rise and fall in resistance when stretched and released, but there is no gradual upward shift. The up-and-down signal remains very stable, unlike the conventional stretchable conductor shown in red.

The stability was maintained as long as they tested: up to 50,000 cycles, 100,000 cycles, 150,000 cycles, 200,000 cycles and 250,000 cycles. There is no gradual upward shift in the up-and-down resistance signal. The speaker then asks whether every problem is solved because this is good performance.

In this short video, you can learn:
* Liquid metal remains liquid at room temperature and can restore electrical pathways after mechanical deformation.
* Rather than resisting cracks, the liquid metal conductor tolerates them and reconnects after deformation.
* The liquid metal conductor maintained stable up-and-down resistance with no gradual upward shift through 250,000 stretch cycles.

šŸ“‹ **Clip Abstract** Eutectic gallium indium is presented as a room-temperature liquid conductor that restores electrical pathways after deformation and tolerates cracks instead of resisting them. On a durability graph, its resistance signal shows no gradual upward shift and remains stable through 250,000 stretch cycles, unlike the conventional stretchable conductor.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
šŸ“… Save the date: 9 and 10 June 2027
šŸ“ Mountain View, California (Silicon Valley)
šŸ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
šŸ“… Save the date: 20 and 21 October 2027
šŸ“ Berlin, Germany
šŸ“‹ Info: https://www.techblick.com/electronicsreshaped

#LiquidMetalConductor, #EutecticGalliumIndium, #StretchCycleDurability, #ResistanceStability, #StretchableElectronics, #PrintedElectronics

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page