top of page

Ryota Shimizu

Satosen

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Ryota Shimizu | Satosen: What resistance change can real applications tolerate in stretchable PCBs, and which markets accept it?

15:38 - 16:46

Other snippets from this talk

Summary of the clip:

What resistance change can real applications tolerate in stretchable PCBs, and which markets accept it?

Standard PCB customers permit only ±10% resistance variation. Stretchable boards cannot hold that window — the speaker states directly that "we cannot stop this kind of resistance change." So the tolerance must be renegotiated with the customer rather than eliminated in the process. The floor question reframes fluctuation as a specification and market-fit problem, not purely a materials one.

With the present hybrid structure, the maker has to ask customers to allow differences in resistance, both high and low. The engineering goal shifts from suppressing drift to declaring it clearly. That turns a single datasheet figure into a negotiated allowance per application — and it means the board's viability is decided at the specification stage.

The active search is for customers who can accept 20% or even 50% resistance change. Those windows sit far outside the standard ±10% contract, so the addressable market is defined by circuit functions that tolerate impedance shift, not by every existing PCB application. Customer acceptance, rather than further process tuning, is what gates adoption today.

In this short video, you can learn:
* Conventional PCB customers allow only ±10% resistance change, a window the speaker says the stretchable board cannot meet.
* The current hybrid structure forces the maker to ask customers to permit resistance differences in both directions, high and low.
* The commercial target has become customers who can accept 20% to 50% resistance change instead of ±10%.

📋 **Clip Abstract** A PCB maker explains that stretchable boards cannot meet the ±10% resistance tolerance normal customers demand, because the resistance change cannot be stopped in the current hybrid structure. The route to production is finding applications whose circuits accept 20% to 50% change.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#StretchablePCB, #ResistanceTolerance, #HybridStructure, #CustomerSpecWindow, #PrintedElectronics, #AdditiveElectronics

This is a highlight of the presentation:

From Lab to Mass Production: Stretchable PCBs Enabled by Liquid Metal Wiring

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

03:19 - 05:17

What hidden failure mechanism causes stretchable silver paste conductors to gradually drift to electrical open?

What hidden failure mechanism causes stretchable silver paste conductors to gradually drift to electrical open?

A standard stretchable PCB test sample used a stretchable substrate with stretchable silver paste. The conductor was repeatedly stretched to 20% while resistance was monitored. Each stretch raised resistance; release lowered it, but it did not fully return to the initial value. The Y-axis resistance and X-axis strain cycles showed cumulative damage, not just the up-and-down signal.

The serious problem is the gradual upward shift in resistance, because that shift finally ends in an electrical open. Repeated deformation accumulates damage on the conductor, and crack formation is the root cause. As cracks develop and accumulate, conductivity decreases and electrical pathways become unstable. The clip calls this exactly what killed stretchable electronics.

The photos make the mechanism visible. Before repeated stretching, the left image shows no crack on the conductor surface. After repeated stretching, the right image shows so many cracks on the surface. Those cracks explain why conductivity falls and pathways become unstable, connecting the measured resistance drift to the final electrical open.

In this short video, you can learn:
* Repeated stretching to 20% raised resistance and release did not fully restore the initial value.
* Crack formation and accumulation were identified as the root cause of conductivity loss and unstable pathways.
* Before-and-after photos showed no surface cracks initially and many cracks after repeated stretching.

📋 **Clip Abstract** A stretchable substrate with stretchable silver paste was cycled to 20% strain while resistance was monitored. The resistance showed a gradual upward shift that ended in an electrical open, with crack formation identified as the root cause.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#StretchableSilverPaste, #ResistanceDrift, #CrackFormation, #ElectricalOpen, #StretchableElectronics, #PrintedElectronics

08:17 - 10:46

Why use a hybrid silver paste and liquid metal structure instead of liquid metal alone for scalable stretchable PCBs?

Why use a hybrid silver paste and liquid metal structure instead of liquid metal alone for scalable stretchable PCBs?

The approach rests on three principles: a simple process, a hybrid structure, and compatibility with existing PCB manufacturing. The process is intentionally simple so it can integrate into existing PCB production infrastructure. In practice, the conductor such as silver paste is printed as its barrier layer, then liquid metal is applied. The stated operations are just print and spray.

Silver paste is the primary conductor carrying the electrical signal, while liquid metal serves as a support conductor. This hybrid structure gives robustness against repeated stretching. It also reduces sensitivity to variation in the amount of liquid metal, because conductivity does not rely only on liquid metal; the silver paste remains there to support stable conductivity under strain.

The hybrid also minimizes liquid metal consumption, which is described as facing global supply-shortage risk. A liquid-metal-only conductor may have better stretchability, but that is not the stated goal. The design intentionally accepts a small performance trade-off in exchange for scalability, manufacturability, and repeatable production feasibility.

In this short video, you can learn:
* Silver paste acts as the primary signal conductor while liquid metal is a support conductor.
* The hybrid reduces sensitivity to liquid-metal amount variation and minimizes liquid-metal consumption.
* The process intentionally accepts a small performance trade-off for scalability, manufacturability and repeatable production feasibility.

📋 **Clip Abstract** A scalable stretchable PCB approach uses a simple print-and-spray process compatible with existing PCB manufacturing: printed silver paste forms the primary conductor and liquid metal acts as a support conductor. The hybrid is presented as robust to repeated stretching, less sensitive to liquid-metal variation, and able to minimize liquid-metal consumption, intentionally accepting a small performance trade-off for manufacturability.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#LiquidMetalWiring, #SilverPasteConductor, #PrintAndSpray, #StretchablePCB, #PrintedElectronics, #AdditiveElectronics

05:15 - 07:39

Can a liquid metal conductor survive 250,000 stretch cycles without resistance drift?

Can a liquid metal conductor survive 250,000 stretch cycles without resistance drift?

Eutectic gallium indium stays liquid at room temperature, so it can restore an electrical pathway after mechanical deformation. Unlike a solid conductor, it does not have to resist cracks; because it is liquid, it can reconnect after being deformed. This is a fundamentally different approach for stretchable electronics.

On the durability graph, the liquid metal conductor is the blue line. It shows the same initial rise and fall in resistance when stretched and released, but there is no gradual upward shift. The up-and-down signal remains very stable, unlike the conventional stretchable conductor shown in red.

The stability was maintained as long as they tested: up to 50,000 cycles, 100,000 cycles, 150,000 cycles, 200,000 cycles and 250,000 cycles. There is no gradual upward shift in the up-and-down resistance signal. The speaker then asks whether every problem is solved because this is good performance.

In this short video, you can learn:
* Liquid metal remains liquid at room temperature and can restore electrical pathways after mechanical deformation.
* Rather than resisting cracks, the liquid metal conductor tolerates them and reconnects after deformation.
* The liquid metal conductor maintained stable up-and-down resistance with no gradual upward shift through 250,000 stretch cycles.

📋 **Clip Abstract** Eutectic gallium indium is presented as a room-temperature liquid conductor that restores electrical pathways after deformation and tolerates cracks instead of resisting them. On a durability graph, its resistance signal shows no gradual upward shift and remains stable through 250,000 stretch cycles, unlike the conventional stretchable conductor.

About the speaker:
* Speaker: Ryota Shimizu
* Company: Satosen
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#LiquidMetalConductor, #EutecticGalliumIndium, #StretchCycleDurability, #ResistanceStability, #StretchableElectronics, #PrintedElectronics


About this talk

→ From Lab to Mass Production: Stretchable PCBs Enabled by Liquid Metal Wiring · Ryota Shimizu · The Future of Electronics RESHAPED 2026 Berlin


Other talks by Ryota Shimizu


More highlights from Ryota Shimizu

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page