Thomas Kolbusch | nextCoatema: What five process pillars decide whether a perovskite coating can scale without losing yield?
04:03 - 05:42
Other snippets from this talk
Summary of the clip:
What five process pillars decide whether a perovskite coating can scale without losing yield?
Upscaling perovskite coating rests on five process pillars: precise web control, the right ink chemistry, roll-to-roll coating processes, drying, and in-line quality control. These pillars are needed because many parameters must be controlled during upscaling. Slot-die work brings rheology, substrate type and substrate stability into consideration, while analog or digital printing such as inkjet adds feature size, resolution and thickness demands.
For coating and printing, the controllable parameters include feature size, resolution and thickness, with thickness accuracy required in both cross-web and web direction. These processes are expensive, so they must be controlled in-line to achieve high yield. That control requirement connects directly to process design for a perovskite solar cell, where scalability must be assessed alongside efficiency.
Process design starts with finding high efficiency, but it cannot stop there. The processes also have to be scalable into production operation; if a process is not scalable, that is a problem. The same five-pillar logic therefore governs upscaling from small-scale roll-to-roll coating, with in-line quality control protecting yield as parameters multiply.
In this short video, you can learn:
* The five process pillars are precise web control, ink chemistry, roll-to-roll coating, drying and in-line quality control.
* Slot-die and printing choices must manage rheology, substrate stability, feature size, resolution and thickness accuracy in cross and web direction.
* Scalability into production operation must be evaluated alongside perovskite solar-cell efficiency because expensive processes need high yield.
📋 **Clip Abstract** The clip lays out five process pillars for upscaling perovskite coating: web control, ink chemistry, roll-to-roll coating, drying and in-line quality control. It links slot-die rheology, substrate stability and printing parameters such as feature size, resolution and thickness accuracy to high-yield process design that must be scalable alongside efficiency.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#PerovskiteInkChemistry, #SlotDieCoating, #InLineQualityControl, #HighYieldUpscaling, #PerovskiteSolarCells, #RollToRollManufacturing
This is a highlight of the presentation:
Scaling perovskite from small scale R2R to big scale inline production systems
21 and 22 OCT 2026
Estrel, Berlin
Organised By:
More Highlights from the same talk.
06:16 - 08:22
Why simulate slot-die pressure and meniscus before building hardware for perovskite?
Why simulate slot-die pressure and meniscus before building hardware for perovskite?
Slot-die coating requires forming a meniscus, not the defective coating shown in the example. The approach uses simulation with an in-house console to understand fluid dynamics and find the right coating window. That matters for perovskite because very thin transparent layers cannot tolerate pinholes or other defects that create shortcuts.
Newtonian fluids are easy to simulate, but non-Newtonian fluids are not easy and cause many problems. CAD designs of the slot dies are meshed, then simulation shows the pressure distribution inside the slot die before the slot die is built. This pre-build pressure study is described as quite important to the approach.
Perovskite scale-up typically starts on small-scale sheet-to-sheet systems, then moves to a table-top roll-to-roll system. Teams must first understand the process and equipment specification, then do process and ink development, changing scale, speed and size into different operations. Before pilot or production equipment, the function and design study must be ready; otherwise the process starts with wrong parameters and time-consuming operation.
In this short video, you can learn:
* Slot-die simulation helps form a meniscus and find the coating window before hardware is built.
* Newtonian fluids simulate easily, while non-Newtonian fluids are difficult and cause problems.
* A function and design study must be ready before pilot or production equipment to avoid wrong process parameters.
📋 **Clip Abstract** Slot-die coating for perovskite depends on forming a meniscus and finding a defect-free coating window, which is studied by simulating fluid dynamics and pressure distribution before building the slot die. The scale-up path runs from sheet-to-sheet and table-top roll-to-roll systems to pilot or production equipment, with process and ink development and a completed function and design study required before the wrong parameters become time-consuming.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#SlotDieCoating, #MeniscusFormation, #PressureDistribution, #PinholeDefects, #PerovskiteSolarCells, #RollToRollProcessing
15:33 - 16:42
How do you slot-die coat 5–10 nm hole transport layers without losing the meniscus?
How do you slot-die coat 5–10 nm hole transport layers without losing the meniscus?
For 5–10 nm hole transport layers, slot-die coating puts pressure distribution first. The shim thickness must be right to hold a constant pressure inside the die between 0.1 and 1 bar. That is the starting point for a stable meniscus in roll-to-roll processing.
The die material and surface matter too. If the chemistry runs at, for example, 50 °C and that temperature must be kept, it affects the quality or precision of the slot die. The material has to change—Hastelloy is named as an option.
It is definitely possible. Once the meniscus is stable, it normally stays stable through the overall process, which is the advantage. But reaching that point is tricky, so thin-layer slot-die coating demands attention to pressure, shim, surface and temperature all together.
In this short video, you can learn:
* For 5–10 nm hole transport layers, the slot die needs the right shim thickness to keep internal pressure constant between 0.1 and 1 bar.
* Chemistry held at 50 °C can affect slot-die quality or precision, so die material may need changing, with Hastelloy named.
* A stable meniscus tends to remain stable through the overall roll-to-roll process, but achieving it is tricky.
📋 **Clip Abstract** Thin 5–10 nm hole transport layers can be slot-die coated, but pressure distribution, shim thickness and die material must be controlled. A stable meniscus tends to hold through roll-to-roll processing, though reaching stability at 0.1–1 bar and with temperature-sensitive chemistry is tricky.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#SlotDieCoating, #HoleTransportLayer, #MeniscusStability, #HastelloyDie, #PerovskiteSolarCells, #RollToRollProcessing
08:32 - 09:28
Why does an 85-metre inline line with full control matter for European scale-up?
Why does an 85-metre inline line with full control matter for European scale-up?
Scaling requires process integration, not just one tool: quality control, pretreatment, the pumping method, lamination integration, environment control and particle avoidance all have to be handled together. Discussions with customers centre on different platforms, because the production system must combine these steps before demonstration and evaluation can be meaningful at production scale.
Funding for production-scale operation depends on demonstration, evaluation and testing of the systems coming out of the equipment. That is why a current Lexter Energy project in Greece matters: it uses an 85-meter long production line with full in-line control, allowing demonstration and evaluation on big-scale production equipment rather than only small-scale systems.
Such big-scale production equipment does not exist in this amount in Europe, according to the talk, so operating the line can give a boost to European industry on the results. The value is not the line alone but the integrated control and the evidence it produces for scale-up decisions.
In this short video, you can learn:
* Process integration must cover quality control, pretreatment, pumping, lamination, environment control and particle avoidance.
* An 85-meter production line with full in-line control is being used in a Lexter Energy project in Greece.
* Demonstration, evaluation and testing on big-scale equipment are required to secure money for production-scale operation.
📋 **Clip Abstract** The clip explains that scale-up requires integrated process control across quality, pretreatment, pumping, lamination, environment and particles. It highlights an 85-meter line with full in-line control in a Greek Lexter Energy project as a route to large-scale demonstration, evaluation and testing that can boost European industry.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin
Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect
Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect
#FullInlineControl, #ProcessIntegration, #LaminationIntegration, #ParticleAvoidance, #PerovskiteScaleUp, #RollToRollManufacturing
About this talk
→ Scaling perovskite from small scale R2R to big scale inline production systems · Thomas Kolbusch · Perovskite Connect 2026
Other talks by Thomas Kolbusch
- Scaling Roll-to-Roll Flexible Hybrid Electronics: From Patented VIA Fabrication to Mainstream Manufacturing · Electronics RESHAPED USA 2026
- Laser drying of printed electronic and battery inks to reduce the dryer length in production lines and to improve the carbon footprint of these productions · The Future of Electronics RESHAPED 2025 USA
- LIFT Printing for high viscous materials in combination with laser drying. · Printed Electronics Innovation Day | Winter 2024
- Tech Pillars of the green hydrogen economy – how to scale the production methods for PEM Fuel cells from lab2fab. · The Future of Electronics RESHAPED 2024 Berlin
- Tech Pillars of the green hydrogen economy – how to scale the production methods for PEM Fuel cells from lab2fab. · The Future of Electronics RESHAPED 2024 USA
- The impact and challenges of using Roll2Roll process in industrial ramp-up · The Future of Photovoltaics: Organic, Perovskites, CIGS, Tandem 2024
- Upscaling OPV into production tech · The Future of Electronics RESHAPED | Berlin 2023
- Sustainable & smart packaging New social and industrial challenges for printed electronics · Innovations Festival: Printed, Flexible, Hybrid, 3D, Wearable, & Textile Electronics 2023
- Upscaling from lab2fab for OPV and Perovskite. · The Future of Photovoltaics: Organic, Perovskites, CIGS, Tandem 2022
- The pathway to digital fabrication of printed electronic products · Innovations Festival: Printed, Hybrid, 3D, InMold, Textile Electronics 2022
More highlights from Thomas Kolbusch
- ▶ How does heat and mass transfer fundamentally limit the speed of drying processes? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ What is the core principle behind using lasers to *improve*, not replace, conventional drying? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ At what stage of the drying process is laser technology most effectively applied, and why? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ Why settle for inkjet's viscosity limitations when Laser-Induced Forward Transfer can print high-viscosity materials with zero contact? · Printed Electronics Innovation Day 2024
- ▶ Can laser drying cut your roll-to-roll drying footprint in half while slashing operational costs by 30%? · Printed Electronics Innovation Day 2024
- ▶ How do you get from 10,000 to 100,000 fuel cell stacks per year without your cycle time killing your business? · The Future of Electronics RESHAPED 2024
- ▶ Your catalyst ink is expensive and your coating must be perfect. How do you guarantee a stable, high-precision process window for your slot-die coater? · The Future of Electronics RESHAPED 2024
- ▶ What if your functional ink has particles too large and viscosity too high for inkjet, but you still need the design freedom of digital printing? · The Future of Electronics RESHAPED 2024
- ▶ Should Europe stop investing in silicon photovoltaics and pivot entirely to OPV and perovskites? · The Future of Electronics RESHAPED 2023 Berlin
- ▶ Can laser-assisted digital printing replace analog slot-die and inkjet systems for high-viscosity solar metallic grids? · The Future of Electronics RESHAPED 2023 Berlin


