top of page

Thomas Kolbusch

nextCoatema

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Thomas Kolbusch | nextCoatema: How do you slot-die coat 5–10 nm hole transport layers without losing the meniscus?

15:33 - 16:42

Other snippets from this talk

Summary of the clip:

How do you slot-die coat 5–10 nm hole transport layers without losing the meniscus?

For 5–10 nm hole transport layers, slot-die coating puts pressure distribution first. The shim thickness must be right to hold a constant pressure inside the die between 0.1 and 1 bar. That is the starting point for a stable meniscus in roll-to-roll processing.

The die material and surface matter too. If the chemistry runs at, for example, 50 °C and that temperature must be kept, it affects the quality or precision of the slot die. The material has to change—Hastelloy is named as an option.

It is definitely possible. Once the meniscus is stable, it normally stays stable through the overall process, which is the advantage. But reaching that point is tricky, so thin-layer slot-die coating demands attention to pressure, shim, surface and temperature all together.

In this short video, you can learn:
* For 5–10 nm hole transport layers, the slot die needs the right shim thickness to keep internal pressure constant between 0.1 and 1 bar.
* Chemistry held at 50 °C can affect slot-die quality or precision, so die material may need changing, with Hastelloy named.
* A stable meniscus tends to remain stable through the overall roll-to-roll process, but achieving it is tricky.

📋 **Clip Abstract** Thin 5–10 nm hole transport layers can be slot-die coated, but pressure distribution, shim thickness and die material must be controlled. A stable meniscus tends to hold through roll-to-roll processing, though reaching stability at 0.1–1 bar and with temperature-sensitive chemistry is tricky.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#SlotDieCoating, #HoleTransportLayer, #MeniscusStability, #HastelloyDie, #PerovskiteSolarCells, #RollToRollProcessing

This is a highlight of the presentation:

Scaling perovskite from small scale R2R to big scale inline production systems

​

​

21 and 22 OCT 2026

Estrel, Berlin

Organised By:

​

​

More Highlights from the same talk.

04:03 - 05:42

What five process pillars decide whether a perovskite coating can scale without losing yield?

What five process pillars decide whether a perovskite coating can scale without losing yield?

Upscaling perovskite coating rests on five process pillars: precise web control, the right ink chemistry, roll-to-roll coating processes, drying, and in-line quality control. These pillars are needed because many parameters must be controlled during upscaling. Slot-die work brings rheology, substrate type and substrate stability into consideration, while analog or digital printing such as inkjet adds feature size, resolution and thickness demands.

For coating and printing, the controllable parameters include feature size, resolution and thickness, with thickness accuracy required in both cross-web and web direction. These processes are expensive, so they must be controlled in-line to achieve high yield. That control requirement connects directly to process design for a perovskite solar cell, where scalability must be assessed alongside efficiency.

Process design starts with finding high efficiency, but it cannot stop there. The processes also have to be scalable into production operation; if a process is not scalable, that is a problem. The same five-pillar logic therefore governs upscaling from small-scale roll-to-roll coating, with in-line quality control protecting yield as parameters multiply.

In this short video, you can learn:
* The five process pillars are precise web control, ink chemistry, roll-to-roll coating, drying and in-line quality control.
* Slot-die and printing choices must manage rheology, substrate stability, feature size, resolution and thickness accuracy in cross and web direction.
* Scalability into production operation must be evaluated alongside perovskite solar-cell efficiency because expensive processes need high yield.

📋 **Clip Abstract** The clip lays out five process pillars for upscaling perovskite coating: web control, ink chemistry, roll-to-roll coating, drying and in-line quality control. It links slot-die rheology, substrate stability and printing parameters such as feature size, resolution and thickness accuracy to high-yield process design that must be scalable alongside efficiency.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#PerovskiteInkChemistry, #SlotDieCoating, #InLineQualityControl, #HighYieldUpscaling, #PerovskiteSolarCells, #RollToRollManufacturing

08:32 - 09:28

Why does an 85-metre inline line with full control matter for European scale-up?

Why does an 85-metre inline line with full control matter for European scale-up?

Scaling requires process integration, not just one tool: quality control, pretreatment, the pumping method, lamination integration, environment control and particle avoidance all have to be handled together. Discussions with customers centre on different platforms, because the production system must combine these steps before demonstration and evaluation can be meaningful at production scale.

Funding for production-scale operation depends on demonstration, evaluation and testing of the systems coming out of the equipment. That is why a current Lexter Energy project in Greece matters: it uses an 85-meter long production line with full in-line control, allowing demonstration and evaluation on big-scale production equipment rather than only small-scale systems.

Such big-scale production equipment does not exist in this amount in Europe, according to the talk, so operating the line can give a boost to European industry on the results. The value is not the line alone but the integrated control and the evidence it produces for scale-up decisions.

In this short video, you can learn:
* Process integration must cover quality control, pretreatment, pumping, lamination, environment control and particle avoidance.
* An 85-meter production line with full in-line control is being used in a Lexter Energy project in Greece.
* Demonstration, evaluation and testing on big-scale equipment are required to secure money for production-scale operation.

📋 **Clip Abstract** The clip explains that scale-up requires integrated process control across quality, pretreatment, pumping, lamination, environment and particles. It highlights an 85-meter line with full in-line control in a Greek Lexter Energy project as a route to large-scale demonstration, evaluation and testing that can boost European industry.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#FullInlineControl, #ProcessIntegration, #LaminationIntegration, #ParticleAvoidance, #PerovskiteScaleUp, #RollToRollManufacturing

06:16 - 08:22

Why simulate slot-die pressure and meniscus before building hardware for perovskite?

Why simulate slot-die pressure and meniscus before building hardware for perovskite?

Slot-die coating requires forming a meniscus, not the defective coating shown in the example. The approach uses simulation with an in-house console to understand fluid dynamics and find the right coating window. That matters for perovskite because very thin transparent layers cannot tolerate pinholes or other defects that create shortcuts.

Newtonian fluids are easy to simulate, but non-Newtonian fluids are not easy and cause many problems. CAD designs of the slot dies are meshed, then simulation shows the pressure distribution inside the slot die before the slot die is built. This pre-build pressure study is described as quite important to the approach.

Perovskite scale-up typically starts on small-scale sheet-to-sheet systems, then moves to a table-top roll-to-roll system. Teams must first understand the process and equipment specification, then do process and ink development, changing scale, speed and size into different operations. Before pilot or production equipment, the function and design study must be ready; otherwise the process starts with wrong parameters and time-consuming operation.

In this short video, you can learn:
* Slot-die simulation helps form a meniscus and find the coating window before hardware is built.
* Newtonian fluids simulate easily, while non-Newtonian fluids are difficult and cause problems.
* A function and design study must be ready before pilot or production equipment to avoid wrong process parameters.

📋 **Clip Abstract** Slot-die coating for perovskite depends on forming a meniscus and finding a defect-free coating window, which is studied by simulating fluid dynamics and pressure distribution before building the slot die. The scale-up path runs from sheet-to-sheet and table-top roll-to-roll systems to pilot or production equipment, with process and ink development and a completed function and design study required before the wrong parameters become time-consuming.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: nextCoatema
* Event: Perovskite Connect 2026 | Berlin
* Location: Estrel, Berlin

Save the date: Perovskite Connect 2027 | 20 and 21 OCT 2027 | Berlin
Co-located with the Future of Electronics RESHAPED conference and exhibition
Learn more: https://www.techblick.com/perovskiteconnect

Intestered in exhibiting: learn more here: https://www.techblick.com/perovskiteconnect

#SlotDieCoating, #MeniscusFormation, #PressureDistribution, #PinholeDefects, #PerovskiteSolarCells, #RollToRollProcessing


About this talk

→ Scaling perovskite from small scale R2R to big scale inline production systems · Thomas Kolbusch · Perovskite Connect 2026


Other talks by Thomas Kolbusch


More highlights from Thomas Kolbusch

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page