Yohan Kim | Fraunhofer IAP: Why does a 500-PPI smartphone display exceed inkjet's mechanical limit, and how does EHD printing bypass it?
07:04 - 09:21
Other snippets from this talk
Summary of the clip:
Why does a 500-PPI smartphone display exceed inkjet's mechanical limit, and how does EHD printing bypass it?
Display quality is mature enough that sustainability now matters for product selling, and printed devices can create greener displays for marketing and later environmental benefit. OLED production is already moving this way: inkjet-printed OLED panels are being produced for the market, with substantial investment in large-scale production.
For a smartphone, about 500 PPI is needed, which implies a 50-micrometer pitch. Conventional inkjet can print it, but it is quite challenging. Piezoelectric actuation squeezes ink and pushes it from the nozzle, so nozzle-side mechanics impose a resolution limitation. This mechanical constraint explains why ordinary inkjet struggles at the high-resolution end.
Electrohydrodynamic jet printing changes the mechanism. A high electric field between nozzle and substrate forms a Taylor cone, so even a large nozzle can generate very tiny droplets and raise printing resolution into micrometer ranges. Because the ink is pulled out rather than pushed, the usable viscosity range can also be very large.
In this short video, you can learn:
* A 500-PPI smartphone display corresponds to a 50-micrometer pixel pitch, which conventional inkjet finds challenging.
* Piezoelectric inkjet pushes ink through the nozzle, creating a mechanical resolution limit.
* EHD printing uses a high electric field to form a Taylor cone, enabling tiny droplets from large nozzles and a wider viscosity range.
📋 **Clip Abstract** Inkjet-printed OLEDs offer a greener display route, but conventional piezoelectric inkjet struggles with the roughly 50-micrometer pitch needed for 500-PPI smartphone displays. Electrohydrodynamic jet printing forms a Taylor cone under a high electric field, pulling out tiny droplets from large nozzles and extending resolution into micrometer ranges with a much wider viscosity range.
About the speaker:
* Speaker: Yohan Kim
* Company: Fraunhofer IAP
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#ElectrohydrodynamicJetPrinting, #TaylorCone, #PiezoelectricInkjet, #500PPIDisplay, #PrintedElectronics, #DisplayManufacturing
This is a highlight of the presentation:
Advanced Materials and Precision Printing for Next-Generation Displays: Toward AI-Assisted Optimization
More Highlights from the same talk.
05:32 - 06:47
Why is Samsung's inkjet-printed electroluminescent quantum-dot display stuck at ~200 PPI—and where else can QDs play?
Why is Samsung's inkjet-printed electroluminescent quantum-dot display stuck at ~200 PPI—and where else can QDs play?
Photoluminescent quantum-dot application is already in the market: quantum dot LED TVs can actually be bought in some stores. Electroluminescence, by contrast, is still described as very promising. Samsung shows a very nice demonstrator—an inkjet-printed electroluminescent quantum-dot display—but it is still not in the market because of certain challenges.
One of those challenges is resolution. The demonstrator's resolution sits in the around-200-PPI range, which is described as still a limitation for high resolution. Electroluminescence is of course interesting in a display, yet that printed pixel resolution is precisely what keeps the demonstrator short of a commercial high-resolution panel.
Electroluminescence can also be applied in different areas for photonic applications. Quantum dot lasers have been very interesting, with electrically pumped very thin film laser sources; the other is single photon sources for quantum communication. Optical communication possibilities can also be generated from the quantum dot—semiconductor and optics materials, not only displays.
In this short video, you can learn:
* Photoluminescent quantum-dot application is already commercial, since quantum dot LED TVs are available in some stores.
* Samsung's inkjet-printed electroluminescent quantum-dot demonstrator sits around the 200 PPI range, which remains a limitation for high resolution and keeps it out of the market.
* Beyond displays, quantum dots are pursued for electrically pumped very thin film quantum dot lasers, single photon sources for quantum communication and optical communication.
📋 **Clip Abstract** Samsung's inkjet-printed electroluminescent quantum-dot demonstrator is held back by a resolution of around 200 PPI, even though photoluminescent quantum-dot TVs are already sold in stores. The same quantum dots extend beyond displays into electrically pumped thin film lasers, single photon sources for quantum communication and optical communication.,
About the speaker:
* Speaker: Yohan Kim
* Company: Fraunhofer IAP
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#InkjetPrintedQD, #ElectroluminescentQD, #QuantumDotLaser, #SinglePhotonSource, #QuantumDotDisplays, #PrintedPhotonics
15:40 - 17:29
Can Gaussian-process optimization match printed film uniformity to spin-coated layers in fewer iterations?
Can Gaussian-process optimization match printed film uniformity to spin-coated layers in fewer iterations?
The group frames the printing experiment as a sequential decision: what to run next. They apply a Gaussian process and data-optimization loop to the printed layer, explicitly comparing printed results with spin-coated target properties. They describe this as machine learning rather than AI, and say future work could train the data with AI.
In their comparison, fewer iterations are used to optimize film uniformity faster, aiming for uniformity comparable to the spin-coated layer. They are still moving to the final step: checking device level and correlating that with the machine-learning process for training. They note they are not AI-process experts and are using modeling.
The claimed advantage is data quality: pilot-line scale is presented as more reliable than lab-scale processing, providing reliable data from material through processing to device level. They call themselves material experts and say collaboration with AI experts is strongly needed, especially physics-informed AI.
In this short video, you can learn:
* The current loop uses a Gaussian process and data optimization to choose the next printing experiment, not a fully AI system.
* Fewer iterations are reported to speed film-uniformity optimization toward spin-coated comparability, with device-level correlation still pending.
* Pilot-line reliability is positioned as the route to higher-quality material-to-device data, with physics-informed AI collaboration named as a need.
📋 **Clip Abstract** A Gaussian-process, data-optimization loop is being used to select the next printing run and compare printed layers against spin-coated targets. The team reports faster film-uniformity optimization in fewer iterations, while device-level correlation and physics-informed AI collaboration remain the next steps.
About the speaker:
* Speaker: Yohan Kim
* Company: Fraunhofer IAP
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#GaussianProcessOptimization, #PrintedFilmUniformity, #SpinCoatedBenchmark, #PhysicsInformedAI, #PrintedElectronics, #MaterialsInformatics
10:11 - 11:59
How can a quantum-dot–organic hybrid ink self-pattern homogeneous pixels without droplet-by-droplet placement?
How can a quantum-dot–organic hybrid ink self-pattern homogeneous pixels without droplet-by-droplet placement?
The quantum dot is capped with an organic ligand, and that ligand can be engineered to incorporate with different charge-transfer layers; here it is combined with a hole-transfer layer at the surface to enhance charge injection. The same hybrid also lifts the film out of the 10-nanometre regime, giving a thicker, more stable layer and air processability.
With the organic quantum-dot nano-hybrid and electrohydrodynamic printing run in continuous jet mode, the ink is written into a bank structure defined by a high-contrast hydrophobic–hydrophilic wetting ratio. On a PDPS hole injection layer, printing a line produces no droplets; the wetting contrast alone drives the ink to pattern itself into a homogeneous pixel structure.
The same approach extends to the quantum-dot layer: it too is patterned by the bank, not by droplet-by-droplet placement. Layer thickness can be tuned with printer speed to optimise the device, and unlike the conventional 10-nanometre quantum-dot film, the organic hybrid promises processability in air.
In this short video, you can learn:
* Grafting the organic ligand to a hole-transfer layer raises charge injection and turns a 10-nanometre quantum-dot film into a thicker, printable one.
* Electrohydrodynamic printing in continuous jet mode, combined with a high-contrast hydrophobic–hydrophilic bank, patterns pixels without droplet-by-droplet placement.
* Printer speed sets layer thickness, giving a direct handle for device optimisation on a PDPS hole injection layer.
📋 **Clip Abstract** An organic–quantum-dot nano-hybrid whose ligand is matched to a hole transfer layer lifts charge injection and printability beyond the usual 10-nanometre film. Printed by electrohydrodynamic continuous jet into high-contrast wetting banks on a PDPS hole injection layer, the ink self-patterns into homogeneous pixels, with printer speed setting layer thickness.
About the speaker:
* Speaker: Yohan Kim
* Company: Fraunhofer IAP
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#QuantumDotInk, #EHDPrinting, #WettingContrastBank, #HoleInjectionLayer, #PrintedElectronics, #AdditiveManufacturing
About this talk
→ Advanced Materials and Precision Printing for Next-Generation Displays: Toward AI-Assisted Optimization · Yohan Kim · The Future of Electronics RESHAPED 2026 Berlin
Other talks by Yohan Kim
- Achieving Printed High-Resolution Quantum Dot Structures for Full-Color Micro-LEDs · Mini- & Micro-LED Displays: Markets, Manufacturing Innovations, Applications, Promising Start-ups 2023
- Progresses & Challenges On QD Colouring Displays · Displays & Lighting: Innovations & Market Trends 2021
More highlights from Yohan Kim
- ▶ Can Quantum Dots Solve the MicroLED "Green Gap" and Angular Color Shift Challenges? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ How Can Shell Engineering Stop Blue Light Leakage in Cadmium-Free Quantum Dots? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ Is Electrohydrodynamic Jetting the Key to Printing 2000+ PPI MicroLED Displays? · Mini- & Micro-LED Displays 2023: Markets, Manufacturing Innovations, Applications, Promising Start-ups


