Andrew Strudwick | Graphene Engineering Innovation Centre: Why does graphene outperform other carbon-based additives in flexible printed electronics and composite materials?
00:18:00 - 00:18:58
Other snippets from this talk
Summary of the clip:
Why does graphene outperform other carbon-based additives in flexible printed electronics and composite materials?
The choice of conductive carbon additives in printed inks determines how well a flexible electronic device will perform under cyclic mechanical stress. Graphene offers unique morphological advantages over zero-dimensional carbon blacks, maintaining superior electrical percolation pathways even under extreme bending.
While formulating custom inks from scratch is often unnecessary due to the availability of mature commercial formulations, selecting the right material morphology is critical. Graphene's two-dimensional structure allows flakes to slide and maintain contact during substrate flexing, preserving device conductivity where standard carbon structures would fracture.
Furthermore, combining different carbon nanomaterials yields powerful synergistic effects. Hybridizing two-dimensional graphene with one-dimensional carbon nanotubes creates a hierarchical network that significantly improves electrical conductivity and mechanical reinforcement in both printed electronics and advanced composite matrices.
In this short video, you can learn:
* The mechanical and electrical advantages of 2D graphene flakes compared to other carbon allotropes in flexible form factors.
* How to select commercial ink formulations tailored specifically to dynamic stress and bending requirements.
* The engineering principles behind hybridizing graphene with carbon nanotubes to optimize electrical percolation in composite systems.
📋 **Clip Abstract** This clip explains why graphene is the preferred additive for maintaining electrical conductivity in flexible and dynamic electronic applications. It also introduces the concept of hybrid carbon systems, demonstrating how pairing graphene with carbon nanotubes yields superior electrical and mechanical performance.
🔗 Link in comments 👇
#GrapheneConductiveInks, #ElectricalPercolation, #HierarchicalCarbonNetworks, #CyclicMechanicalStress, #PrintedElectronics, #FlexibleElectronics
This is a highlight of the presentation:
2D materials in printed electronics
Future of Electronics RESHAPED USA 2026
10-11 June 2026
Computer History Museum, Mountain View, California, USA
Organised By:
TechBlick
More Highlights from the same talk.
01:55 - 03:36
Why did sticky-tape exfoliation of micron-scale flakes create graphene hype before scalable supply?
Why did sticky-tape exfoliation of micron-scale flakes create graphene hype before scalable supply?
Isolation was deliberately simple: a sellotape-like tape peeled graphite layers apart until a monolayer remained. The Nobel Prize recognised the quantum Hall effect measured on those flakes through good microfab, but the appeal was the method itself. That simplicity captured the scientific community’s attention and set up the hype cycle that followed.
Once people measured the physical properties, superlative values appeared for mechanical strength, electrical, thermal and chemical performance, plus area performance. The catch: most results came from micron-scale single flakes isolated by the sellotape method, not a scalable supply route. Hype ran ahead of manufacturability.
One year after the original graphene paper, a paper showed graphite was not alone: other layered 3D materials could be exfoliated into 2D by the same method, creating a material portfolio. Boron nitride is a dielectric insulator that conducts thermally; other 2D materials such as MoS2 are semiconductors.
In this short video, you can learn:
* The original isolation used a sellotape-like tape to peel graphite down to monolayer flakes, and the Nobel Prize was for quantum Hall measurements made on those flakes.
* Superlative mechanical, electrical, thermal and chemical values were measured on micron-scale single flakes, which was not scalable.
* A year after the first graphene paper, other layered 3D materials—boron nitride and MoS2 among them—were exfoliated into 2D, expanding the portfolio.
📋 **Clip Abstract** The clip traces graphene’s sticky-tape isolation to monolayer flakes and the quantum Hall microfab that won the Nobel Prize, explaining how simplicity drove hype. It contrasts superlative properties measured on micron-scale flakes with the absence of scalable supply, then notes the one-year-later expansion to boron nitride and MoS2.
About the speaker:
* Speaker: Andrew Strudwick
* Company: GEIC
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#StickyTapeExfoliation, #MicronScaleFlakes, #QuantumHallEffect, #BoronNitrideDielectric, #2DMaterials, #GrapheneCommercialisation
09:19 - 10:12
What price point lets graphene move into mass-volume packaging?
What price point lets graphene move into mass-volume packaging?
Graphene Addition, a company relatively local to the speaker, was taken through the whole initial-testing process and is now producing product that is going out into the market. Its packaging solution uses graphene addition, showing a route from testing to a product going into the market.
Adding graphene into the packaging allowed Graphene Addition to lightweight the packaging and increase the amount of recycled materials used within it, while maintaining performance. This is presented as a packaging solution already in production and going out to market.
The speaker notes that five years ago he would have been surprised by a material-production price point low enough for mass-volume packaging. That is where the market has now reached with graphene, according to the talk.
In this short video, you can learn:
* Graphene Addition moved from initial testing to producing product that is going out into the market.
* Graphene addition in packaging enabled lightweighting and more recycled material while maintaining performance.
* A material-production price point now supports mass-volume packaging, a point the speaker says would have surprised him five years ago.
📋 **Clip Abstract** Graphene Addition has moved from initial testing to a market product, with graphene incorporated into a packaging solution. The packaging uses graphene to lightweight the format and increase recycled content while maintaining performance, at a material-production price point now suitable for mass-volume packaging.
About the speaker:
* Speaker: Andrew Strudwick
* Company: GEIC
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#GrapheneAddition, #MassVolumePackaging, #LightweightPackaging, #RecycledContent, #GrapheneCommercialization, #SustainablePackaging
07:57 - 09:05
Which mass-market products already use graphene, and what unexpected second benefits did Ford find?
Which mass-market products already use graphene, and what unexpected second benefits did Ford find?
Graphene is more prominent in products than it may appear. Huawei uses it as a heat-spreading material in many latest phone models, applied as a packing material on the back of the chipset to move thermal energy away from the chipset.
Ford uses graphene in a number of components, including one pickup truck in the States. Its most famous use is an engine-bay foam structure incorporated with graphene initially for thermal transport; after thermal improvements, Ford also observed significantly decreased cabin noise and increased mechanical properties.
Those mechanical gains let Ford lightweight and pack components closer together in the engine. The pattern is common when adding graphene 2D materials to systems: the initial benefit is often not the only one, and one improvement can reveal additional benefits beyond the original target.
In this short video, you can learn:
* Huawei applies graphene as a heat-spreading packing material on the back of the chipset in many latest phone models.
* Ford's engine-bay graphene foam was adopted for thermal transport but also reduced cabin noise and increased mechanical properties.
* Adding graphene 2D materials to systems often delivers more than one benefit, not just the initially targeted property.
📋 **Clip Abstract** The clip shows graphene already in mass-market products: Huawei phone chipset heat spreading and Ford pickup-truck engine-bay foam. Ford's initial thermal-transport use also delivered lower cabin noise and stronger foam mechanics, illustrating that graphene additions can produce multiple simultaneous benefits.
About the speaker:
* Speaker: Andrew Strudwick
* Company: GEIC
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped
#GrapheneHeatSpreading, #EngineBayFoam, #CabinNoiseReduction, #FoamMechanicalProperties, #GrapheneMaterials, #2DMaterials
About this talk
→ 2D materials in printed electronics · Andrew Strudwick · Electronics RESHAPED USA 2026
Other talks by Andrew Strudwick
- Graphene at Twenty: From Scientific Discovery to Commercial Reality · The Future of Electronics RESHAPED 2026 Berlin
- Graphene and 2D materials printed electronics · TechBlick Innovations Festival July 2026
- Graphene and 2D Material Inks: Conductive, Optical and Beyond · Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025
More highlights from Andrew Strudwick
- ▶ Why did sticky-tape exfoliation of micron-scale flakes create graphene hype before scalable supply? · Electronics RESHAPED 2026 | Berlin
- ▶ Which mass-market products already use graphene, and what unexpected second benefits did Ford find? · Electronics RESHAPED 2026 | Berlin
- ▶ What price point lets graphene move into mass-volume packaging? · Electronics RESHAPED 2026 | Berlin
- ▶ Why can’t graphene conductive inks match silver inks, and where do they still win? · Electronics RESHAPED 2026 | Berlin
- ▶ How can you accelerate advanced materials R&D from a 3-year cycle to just 3 months? · Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025
- ▶ Can a traditional technique like screen printing be the key to prototyping next-gen graphene sensors? · Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025
- ▶ What does it take to move printed graphene devices from the lab bench to pilot-scale production? · Additive, Printed, Hybrid and Sustainable Electronics Innovations Day 2025


