top of page

Andrew Strudwick

University of Manchester

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Andrew Strudwick | University of Manchester: How can screen printing and small-scale pre-tests de-risk a new formulation before full roll-to-roll production?

05:55 - 08:14

Other snippets from this talk

Summary of the clip:

How can screen printing and small-scale pre-tests de-risk a new formulation before full roll-to-roll production?

The workhorse system is a Microtech screen printer, used for rapid prototyping. Hundreds of test devices can be printed within half a day, then statistical data generated on those devices. Application areas include biosensors, heating elements and mechanical sensors; some details are withheld for client confidentiality, with case studies later.

Substrate work spans fabrics, polymers and bits for carbon-fibre composites, with many different substrate types. Alongside the screen printer is roll-to-roll capability using a Coatma base coater. That system offers many print methods, allowing pre-tests on smaller scale.

The aim is to de-risk activity for partners before they take a process, new formulation or new substrate to a full production house. Pre-tests provide parameters that have worked at smaller scale before full roll-to-roll. This reduces cost risk from taking down a production site and starting from scratch. In-house measurement capability and expertise exist.

In this short video, you can learn:
* A Microtech screen printer supports rapid prototyping, printing hundreds of test devices in half a day for statistical data.
* Roll-to-roll work uses a Coatma base coater with many print methods, enabling smaller-scale parameter pre-tests.
* Substrate range includes fabrics, polymers and bits for carbon-fibre composites, with in-house measurement capability and expertise.

📋 **Clip Abstract** Screen printing and roll-to-roll pre-tests de-risk new formulations, processes and substrates before full production, reducing cost risk. The setup covers fabrics, polymers, carbon-fibre composite inserts, biosensors, heating elements and mechanical sensors.

About the speaker:
* Speaker: Andrew Strudwick
* Company: University of Manchester
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#MicrotechScreenPrinter, #CoatmaBaseCoater, #CarbonFibreCompositeSubstrates, #RollToRollPreTests, #PrintedElectronics, #2DMaterials

This is a highlight of the presentation:

Graphene and 2D materials printed electronics

Innovation Festival: Additive, Printed, Sustainable Electronics

Innovation Festival: MicroLEDs and AR/VR Displays

10 July 2026

Online Platform

Organised By:

TechBlick

TechBlick and MicroLED Industry Association

More Highlights from the same talk.

15:30 - 16:57

Who owns the IP when a company develops a graphene product with the center?

Who owns the IP when a company develops a graphene product with the center?

The center exists to stimulate commercialization, so it gives IP to the end user—the company. A royalty fee is included; it can be negotiated and is project dependent. The center does not hold onto the IP, letting it go into the company. The company is free to take it forward.

The royalty is charged on the graphene-containing element within that product. For example, if a heating element sits within a phone, the royalty would not be on the phone; it would be on the heating element. The same applies to a thermal dissipation element.

Asked whether the model is license, hold, or assign, the answer is that it's theirs. The company receives the IP, and the center charges a royalty. The clip closes by asking how a startup company from India could approach the center for research work.

In this short video, you can learn:
* The center assigns resulting IP to the end user, the company, with a royalty fee that is negotiable and project dependent.
* Royalties attach to the graphene-containing element, such as a phone's heating or thermal dissipation element, not the entire phone.
* The IP model is described as the company's—'it's theirs'—so licenses or retention by the center are not the mechanism.

📋 **Clip Abstract** The clip addresses IP ownership when a company develops a graphene product with the center. The center gives IP to the end-user company, charges a negotiable royalty on the graphene-containing element, and does not hold the IP, leaving the company free to take it forward.

About the speaker:
* Speaker: Andrew Strudwick
* Company: University of Manchester
* Event: nnovation Festival: Additive, Printed, Sustainable Electronics, MicroLEDs and AR/VR Displays, Perovskites | July 2026
* Location: Online Platform

Annual access to our onsite event(s), all online events and a library featuring over 1800 presentations (recordings + PDF) across all our onsite and onsite events and technology areas. Join us and over 2000 members from around the world now.
Explore and join now --> https://www.techblick.com/

#GrapheneIP, #RoyaltyModel, #ThermalDissipationElement, #HeatingElement, #2DMaterials, #GrapheneElectronics

07:57 - 09:05

Which mass-market products already use graphene, and what unexpected second benefits did Ford find?

Which mass-market products already use graphene, and what unexpected second benefits did Ford find?

Graphene is more prominent in products than it may appear. Huawei uses it as a heat-spreading material in many latest phone models, applied as a packing material on the back of the chipset to move thermal energy away from the chipset.

Ford uses graphene in a number of components, including one pickup truck in the States. Its most famous use is an engine-bay foam structure incorporated with graphene initially for thermal transport; after thermal improvements, Ford also observed significantly decreased cabin noise and increased mechanical properties.

Those mechanical gains let Ford lightweight and pack components closer together in the engine. The pattern is common when adding graphene 2D materials to systems: the initial benefit is often not the only one, and one improvement can reveal additional benefits beyond the original target.

In this short video, you can learn:
* Huawei applies graphene as a heat-spreading packing material on the back of the chipset in many latest phone models.
* Ford's engine-bay graphene foam was adopted for thermal transport but also reduced cabin noise and increased mechanical properties.
* Adding graphene 2D materials to systems often delivers more than one benefit, not just the initially targeted property.

📋 **Clip Abstract** The clip shows graphene already in mass-market products: Huawei phone chipset heat spreading and Ford pickup-truck engine-bay foam. Ford's initial thermal-transport use also delivered lower cabin noise and stronger foam mechanics, illustrating that graphene additions can produce multiple simultaneous benefits.

About the speaker:
* Speaker: Andrew Strudwick
* Company: GEIC
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#GrapheneHeatSpreading, #EngineBayFoam, #CabinNoiseReduction, #FoamMechanicalProperties, #GrapheneMaterials, #2DMaterials

01:55 - 03:36

Why did sticky-tape exfoliation of micron-scale flakes create graphene hype before scalable supply?

Why did sticky-tape exfoliation of micron-scale flakes create graphene hype before scalable supply?

Isolation was deliberately simple: a sellotape-like tape peeled graphite layers apart until a monolayer remained. The Nobel Prize recognised the quantum Hall effect measured on those flakes through good microfab, but the appeal was the method itself. That simplicity captured the scientific community’s attention and set up the hype cycle that followed.

Once people measured the physical properties, superlative values appeared for mechanical strength, electrical, thermal and chemical performance, plus area performance. The catch: most results came from micron-scale single flakes isolated by the sellotape method, not a scalable supply route. Hype ran ahead of manufacturability.

One year after the original graphene paper, a paper showed graphite was not alone: other layered 3D materials could be exfoliated into 2D by the same method, creating a material portfolio. Boron nitride is a dielectric insulator that conducts thermally; other 2D materials such as MoS2 are semiconductors.

In this short video, you can learn:
* The original isolation used a sellotape-like tape to peel graphite down to monolayer flakes, and the Nobel Prize was for quantum Hall measurements made on those flakes.
* Superlative mechanical, electrical, thermal and chemical values were measured on micron-scale single flakes, which was not scalable.
* A year after the first graphene paper, other layered 3D materials—boron nitride and MoS2 among them—were exfoliated into 2D, expanding the portfolio.

📋 **Clip Abstract** The clip traces graphene’s sticky-tape isolation to monolayer flakes and the quantum Hall microfab that won the Nobel Prize, explaining how simplicity drove hype. It contrasts superlative properties measured on micron-scale flakes with the absence of scalable supply, then notes the one-year-later expansion to boron nitride and MoS2.

About the speaker:
* Speaker: Andrew Strudwick
* Company: GEIC
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#StickyTapeExfoliation, #MicronScaleFlakes, #QuantumHallEffect, #BoronNitrideDielectric, #2DMaterials, #GrapheneCommercialisation


About this talk

→ Graphene and 2D materials printed electronics · Andrew Strudwick · TechBlick Innovations Festival July 2026


Other talks by Andrew Strudwick


More highlights from Andrew Strudwick

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page