top of page

Doyoung Byun

Enjet

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Doyoung Byun | Enjet: How do we scale electro-hydrodynamic printing from single-nozzle repair tools to high-throughput display mass production?

00:11:15 - 00:13:09

Other snippets from this talk

Summary of the clip:

How do we scale electro-hydrodynamic printing from single-nozzle repair tools to high-throughput display mass production?

While single-nozzle electro-hydrodynamic (EHD) systems excel at precise local repairs, mass production applications like quantum dot (QD) color conversion layers demand massive throughput. Scaling this technology requires transitioning to multi-nozzle architectures that can maintain uniform electric fields across dozens or hundreds of adjacent nozzles. Without careful electrode design, crosstalk between nozzles can distort droplet trajectories and ruin deposition uniformity.

Enjet's multi-nozzle EHD printheads, scaling from 16 to 256 nozzles, address this scaling challenge by achieving high-density nozzle packing with minimal electrostatic interference. These advanced heads can jet highly viscous functional inks with drop volumes sliding into the sub-picoliter and even femtoliter regimes. This allows for the direct printing of ultra-fine quantum dot sub-pixels without relying on expensive, material-wasteful photolithography steps.

Integrating these multi-nozzle arrays into industrial print engines enables high-speed, high-resolution deposition of functional materials across large-generation glass substrates. By offering precise volume control and excellent dot-placement accuracy, this technology bridges the gap between high-viscosity formulation requirements and ultra-fine pitch display architectures, opening new frontiers for printed electronics.

In this short video, you can learn:
* The engineering hurdles of mitigating electrostatic crosstalk in multi-nozzle EHD printheads.
* How multi-nozzle EHD achieves sub-picoliter and femtoliter droplet control with high-viscosity inks.
* The application of multi-nozzle arrays to direct quantum dot patterning for advanced displays.

📋 **Clip Abstract** This clip details the transition of electro-hydrodynamic printing from single-nozzle repair to multi-nozzle mass production arrays of up to 256 nozzles. It explores how these printheads jet highly viscous materials at sub-picoliter scales to pattern quantum dot color filters directly.

#ElectrohydrodynamicPrinting, #MultiNozzleEHD, #SubPicoliterJetting, #QuantumDotPatterning, #MicroLEDDisplays, #PrintedElectronics

This is a highlight of the presentation:

​

Mini- & Micro-LED Displays 2022: Markets, Manufacturing Innovations, Applications, Promising Start-ups

​

​

TechBlick Platform |Online

Organised By:

TechBlick

​

More Highlights from the same talk.

06:25 - 08:45

Why does EHD jetting beat piezoelectric inkjet on resolution, viscosity and conformal 3D deposition?

Why does EHD jetting beat piezoelectric inkjet on resolution, viscosity and conformal 3D deposition?

The talk contrasts EHD jet printing with dispenser inkjet and screen printing, which have a resolution limit. EHD uses a force balance between electrical force and fluid dynamics, enabling smaller droplet generation and electrode patterns down to 1 micrometer. It covers the full 1-to-100-micrometer pattern range. The claimed benefit is direct high-resolution patterning in that range, not merely incremental improvement over conventional dispensing or screen methods.

Piezoelectric inkjet is described as really stable and reliable, but it suffers from resolution and viscosity limits. EHD can make nanometer-scale droplets, pattern 1-to-100-micrometer structures, and inject really high-viscosity ink. That viscosity capability matters because the comparison is not only droplet size; it widens the printable ink window while retaining fine patterning. The speaker presents these as the core performance distinctions between piezoelectric inkjet and EHD.

Two movies show the deposition difference. Inkjet-ejected droplets follow inertial force and gravity. Drops ejected by EHD follow the electrical field distribution, so on complex surfaces they can make contact or approach a sidewall. The speaker calls this an additional advantage beyond resolution and viscosity. It connects the electric-field-guided flight path to contact or approach on complex surfaces and sidewalls, rather than simple inertial and gravitational droplet motion.

In this short video, you can learn:
* EHD printing covers 1-to-100-micrometer electrode patterns by balancing electrical force and fluid dynamics.
* Piezoelectric inkjet is stable and reliable but limited by resolution and viscosity, while EHD enables nanometer-scale droplets and high-viscosity inks.
* EHD droplets follow the electrical field distribution, allowing contact or approach to sidewalls on complex surfaces.

📋 **Clip Abstract** EHD jet printing is presented as a higher-resolution alternative to dispenser inkjet and screen printing, covering 1-to-100-micrometer patterns through electrical-force and fluid-dynamics balance. Compared with stable but resolution- and viscosity-limited piezoelectric inkjet, EHD enables nanometer-scale droplets and high-viscosity inks, while its field-guided drops can contact complex surfaces and sidewalls.

About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#EHDJetPrinting, #PiezoelectricInkjet, #HighViscosityInk, #ElectricFieldGuidedDeposition, #PrintedElectronics, #AdditiveManufacturing

15:58 - 17:40

Can printing produce a 200 µm metal gear with 200 nm roughness and multilayer metamaterials?

Can printing produce a 200 µm metal gear with 200 nm roughness and multilayer metamaterials?

An extreme demonstration of resolution: a metallic gear printed with a diameter of around 200 micrometres and a measured surface roughness of only 200 nanometres. The speaker attributes this to optimisation of both the material and the process, and notes that layer-by-layer metallic gears can be fabricated. He calls this an interesting and very important feature of the printer's performance, showing how small a high-resolution feature the process can produce.

At macro scale the platform builds 3D structures from UV-curable epoxy polymers. The stated next step is layer-by-layer fabrication: the first layer is polymer, then an electrode is printed, then an additional layer goes down and printing repeats. That sequence turns a single-material build into a stack where polymer and conductive functions are interleaved, moving from 3D shape toward functional printed devices.

The multilayer example presented is a high refractive index metamaterial. In the four-layer device described, the result is an effective refractive index of almost 25, a figure that depends on stacking polymer and electrode layers in register. The speaker says similar applications are under development, positioning sequential multi-material printing as a manufacturing path for optical metamaterials rather than a laboratory curiosity.

In this short video, you can learn:
* A metallic gear roughly 200 micrometres in diameter was printed with only 200 nanometres of surface roughness after optimising material and process.
* Macro-scale 3D structures are built from UV-curable epoxy polymers, with layer-by-layer printing alternating polymer and electrode layers as the next step.
* A four-layer printed high refractive index metamaterial device showed an effective refractive index of almost 25.

📋 **Clip Abstract** Printing is demonstrated down to a metallic gear of about 200 micrometres diameter with 200 nanometres surface roughness, and up to macro-scale 3D epoxy structures. Alternating polymer and electrode layers yield a four-layer high refractive index metamaterial with an effective index near 25.

About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#MetallicGearPrinting, #SurfaceRoughness200nm, #HighIndexMetamaterial, #UVEpoxyStructures, #PrintedElectronics, #AdditiveManufacturing

11:30 - 13:33

What do MicroLED bond pads, 20×100 µm quantum-dot pixels and 3D EMI shields have in common?

What do MicroLED bond pads, 20×100 µm quantum-dot pixels and 3D EMI shields have in common?

For MicroLED displays, the high-resolution printer and ink materials contribute bond-pad application and a bonding solution at several-micrometer scale. The printer can make the pad, and the customer transfers chips onto it. The MicroLED display then successfully turns on in red, green and blue. This is the bond-pad side of the high-resolution printing story.

Quantum-dot materials can be filled in the pixels; in the shown example the pixel size is 20 by 100 micrometers, and the printer patterns quantum-dot material inside. The talk also covers 3D printed electronics for a semiconductor chip, where a customer wants the EMI shield layer covered. Compared with a conventional coater, the presented coating has visibly different coverage and is highly uniform, even on sidewalls and top walls.

On EMI shielding effectiveness, the talk reports three nines or four nines at 60 dB and 80 dB respectively. The coating is described as a really visible layer with highly uniform performance, including uniform thin films on sidewalls or top walls. A 3D printed antenna solution is also introduced.

In this short video, you can learn:
* The printer fabricates MicroLED bond pads at several-micrometer scale so customers can transfer chips and turn on RGB displays.
* Quantum-dot material is patterned inside 20 by 100 µm pixels using the high-resolution printing approach.
* Uniform 3D EMI coatings on sidewalls and top walls reach 60 dB and 80 dB with three-nines or four-nines shielding effectiveness, alongside a 3D printed antenna solution.

📋 **Clip Abstract** High-resolution printing and ink materials enable several-micrometer MicroLED bond pads, chip transfer and RGB display operation. The printer patterns quantum dots in 20 by 100 µm pixels and produces uniform 3D EMI coatings, including sidewalls, reported at 60 dB and 80 dB, plus a 3D printed antenna solution.

About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#MicroLEDBondPad, #QuantumDotPixel, #EMIShieldingCoating, #HighResolutionPrinter, #PrintedElectronics, #AdditiveManufacturing


Other talks by Doyoung Byun


More highlights from Doyoung Byun

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page