Doyoung Byun | ENJET Inc: Can printing produce a 200 µm metal gear with 200 nm roughness and multilayer metamaterials?
15:58 - 17:40
Other snippets from this talk
Summary of the clip:
Can printing produce a 200 µm metal gear with 200 nm roughness and multilayer metamaterials?
An extreme demonstration of resolution: a metallic gear printed with a diameter of around 200 micrometres and a measured surface roughness of only 200 nanometres. The speaker attributes this to optimisation of both the material and the process, and notes that layer-by-layer metallic gears can be fabricated. He calls this an interesting and very important feature of the printer's performance, showing how small a high-resolution feature the process can produce.
At macro scale the platform builds 3D structures from UV-curable epoxy polymers. The stated next step is layer-by-layer fabrication: the first layer is polymer, then an electrode is printed, then an additional layer goes down and printing repeats. That sequence turns a single-material build into a stack where polymer and conductive functions are interleaved, moving from 3D shape toward functional printed devices.
The multilayer example presented is a high refractive index metamaterial. In the four-layer device described, the result is an effective refractive index of almost 25, a figure that depends on stacking polymer and electrode layers in register. The speaker says similar applications are under development, positioning sequential multi-material printing as a manufacturing path for optical metamaterials rather than a laboratory curiosity.
In this short video, you can learn:
* A metallic gear roughly 200 micrometres in diameter was printed with only 200 nanometres of surface roughness after optimising material and process.
* Macro-scale 3D structures are built from UV-curable epoxy polymers, with layer-by-layer printing alternating polymer and electrode layers as the next step.
* A four-layer printed high refractive index metamaterial device showed an effective refractive index of almost 25.
📋 **Clip Abstract** Printing is demonstrated down to a metallic gear of about 200 micrometres diameter with 200 nanometres surface roughness, and up to macro-scale 3D epoxy structures. Alternating polymer and electrode layers yield a four-layer high refractive index metamaterial with an effective index near 25.
About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/
#MetallicGearPrinting, #SurfaceRoughness200nm, #HighIndexMetamaterial, #UVEpoxyStructures, #PrintedElectronics, #AdditiveManufacturing
This is a highlight of the presentation:
High-Resolution Printing from 2D to 3D for Additive Manufacturing of Printed Electronics
More Highlights from the same talk.
06:25 - 08:45
Why does EHD jetting beat piezoelectric inkjet on resolution, viscosity and conformal 3D deposition?
Why does EHD jetting beat piezoelectric inkjet on resolution, viscosity and conformal 3D deposition?
The talk contrasts EHD jet printing with dispenser inkjet and screen printing, which have a resolution limit. EHD uses a force balance between electrical force and fluid dynamics, enabling smaller droplet generation and electrode patterns down to 1 micrometer. It covers the full 1-to-100-micrometer pattern range. The claimed benefit is direct high-resolution patterning in that range, not merely incremental improvement over conventional dispensing or screen methods.
Piezoelectric inkjet is described as really stable and reliable, but it suffers from resolution and viscosity limits. EHD can make nanometer-scale droplets, pattern 1-to-100-micrometer structures, and inject really high-viscosity ink. That viscosity capability matters because the comparison is not only droplet size; it widens the printable ink window while retaining fine patterning. The speaker presents these as the core performance distinctions between piezoelectric inkjet and EHD.
Two movies show the deposition difference. Inkjet-ejected droplets follow inertial force and gravity. Drops ejected by EHD follow the electrical field distribution, so on complex surfaces they can make contact or approach a sidewall. The speaker calls this an additional advantage beyond resolution and viscosity. It connects the electric-field-guided flight path to contact or approach on complex surfaces and sidewalls, rather than simple inertial and gravitational droplet motion.
In this short video, you can learn:
* EHD printing covers 1-to-100-micrometer electrode patterns by balancing electrical force and fluid dynamics.
* Piezoelectric inkjet is stable and reliable but limited by resolution and viscosity, while EHD enables nanometer-scale droplets and high-viscosity inks.
* EHD droplets follow the electrical field distribution, allowing contact or approach to sidewalls on complex surfaces.
📋 **Clip Abstract** EHD jet printing is presented as a higher-resolution alternative to dispenser inkjet and screen printing, covering 1-to-100-micrometer patterns through electrical-force and fluid-dynamics balance. Compared with stable but resolution- and viscosity-limited piezoelectric inkjet, EHD enables nanometer-scale droplets and high-viscosity inks, while its field-guided drops can contact complex surfaces and sidewalls.
About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/
#EHDJetPrinting, #PiezoelectricInkjet, #HighViscosityInk, #ElectricFieldGuidedDeposition, #PrintedElectronics, #AdditiveManufacturing
00:04:43 - 00:07:14
How can we scale MicroLED manufacturing when a mere 1% defect rate requires replacing over 200,000 individual chips?
How can we scale MicroLED manufacturing when a mere 1% defect rate requires replacing over 200,000 individual chips?
Perfect yield in MicroLED display assembly is practically impossible with current mass transfer technologies. Even with a 99% placement yield on a high-resolution display, hundreds of thousands of defective pixels remain that must be individually reworked. Conventional dispensing methods like piezo-pipette or mechanical valves cannot scale down to the sub-10-micron dimensions required for modern ultra-fine pitch MicroLED display repair.
Electro-hydrodynamic (EHD) inkjet printing solves this processing bottleneck by utilizing a strong, localized electric field between the nozzle tip and the substrate. This specialized field pulls the ink meniscus into a stable Taylor cone, allowing for the precise deposition of bonding pads and solder materials at resolutions well under 10 micrometers. By dynamically guiding the flight path of individual droplets, EHD eliminates the satellite droplet and splatter issues that plague traditional piezoelectric and thermal inkjet heads.
This targeted material deposition forms the backbone of a comprehensive MicroLED repair cycle. Once inspection systems locate a dead or misaligned die, it is removed, and the EHD head prints a precise, uniform deposit of bonding material on the vacant pads. A high-precision pick-and-place tool then populates a functional replacement die, ensuring a clean path to achieving a true 100% display yield.
In this short video, you can learn:
* The statistical reality of MicroLED defect rates and why post-transfer repair is indispensable.
* How EHD utilizes localized electric fields to achieve high-resolution printing under 10 micrometers.
* The complete, automated cycle of defect identification, pad preparation, and chip replacement.
📋 **Clip Abstract** This clip explains the critical yield bottleneck in MicroLED display manufacturing and why a robust repair strategy is indispensable. It highlights how electro-hydrodynamic (EHD) inkjet printing achieves sub-10-micron precision to deposit bonding materials for individual pixel rework.
#ElectrohydrodynamicPrinting, #MicroLEDRework, #SubTenMicronDeposition, #TaylorConeJetting, #MicroLEDDisplays, #AdditiveElectronics
11:30 - 13:33
What do MicroLED bond pads, 20×100 µm quantum-dot pixels and 3D EMI shields have in common?
What do MicroLED bond pads, 20×100 µm quantum-dot pixels and 3D EMI shields have in common?
For MicroLED displays, the high-resolution printer and ink materials contribute bond-pad application and a bonding solution at several-micrometer scale. The printer can make the pad, and the customer transfers chips onto it. The MicroLED display then successfully turns on in red, green and blue. This is the bond-pad side of the high-resolution printing story.
Quantum-dot materials can be filled in the pixels; in the shown example the pixel size is 20 by 100 micrometers, and the printer patterns quantum-dot material inside. The talk also covers 3D printed electronics for a semiconductor chip, where a customer wants the EMI shield layer covered. Compared with a conventional coater, the presented coating has visibly different coverage and is highly uniform, even on sidewalls and top walls.
On EMI shielding effectiveness, the talk reports three nines or four nines at 60 dB and 80 dB respectively. The coating is described as a really visible layer with highly uniform performance, including uniform thin films on sidewalls or top walls. A 3D printed antenna solution is also introduced.
In this short video, you can learn:
* The printer fabricates MicroLED bond pads at several-micrometer scale so customers can transfer chips and turn on RGB displays.
* Quantum-dot material is patterned inside 20 by 100 µm pixels using the high-resolution printing approach.
* Uniform 3D EMI coatings on sidewalls and top walls reach 60 dB and 80 dB with three-nines or four-nines shielding effectiveness, alongside a 3D printed antenna solution.
📋 **Clip Abstract** High-resolution printing and ink materials enable several-micrometer MicroLED bond pads, chip transfer and RGB display operation. The printer patterns quantum dots in 20 by 100 µm pixels and produces uniform 3D EMI coatings, including sidewalls, reported at 60 dB and 80 dB, plus a 3D printed antenna solution.
About the speaker:
* Speaker: Doyoung Byun
* Company: ENJET Inc
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/
#MicroLEDBondPad, #QuantumDotPixel, #EMIShieldingCoating, #HighResolutionPrinter, #PrintedElectronics, #AdditiveManufacturing
About this talk
→ High-Resolution Printing from 2D to 3D for Additive Manufacturing of Printed Elecronics · Doyoung Byun · Displays & Lighting: Innovations & Market Trends 2021
Other talks by Doyoung Byun
- Redefining Functional Printing: Innovations in EHD Inkjet Multi-Nozzle Technology · The Future of Electronics RESHAPED 2025
- Contribution of Electrohydrodynamic (EHD) Inkjet Printing for micro-LED Display Fabrication and Evolution to Multi-Nozzle EHD Inkjet Printhead · Quantum Dots: Material Innovations and Commercial Applications 2022
- High-Resolution Printing from 2D to 3D for Additive Manufacturing of Printed Electronics · Printed, Hybrid, Structural, & 3D Electronics 2021
More highlights from Doyoung Byun
- ▶ What are the key performance demands that printed electronics places on printing technology? · The Future of Electronics RESHAPED 2025
- ▶ How does EHD printing utilize electric fields to achieve finer and more precise processes? · The Future of Electronics RESHAPED 2025
- ▶ What are the trade-offs between single-nozzle and multi-nozzle EHD printing, and how does Enjet address the limitations of multi-nozzle EHD? · The Future of Electronics RESHAPED 2025
- ▶ How can we scale MicroLED manufacturing when a mere 1% defect rate requires replacing over 200,000 individual chips? · Mini- & Micro-LED Displays 2022: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ Can we reliably repair sub-10-micron display electrodes without constantly clogging the printhead nozzle? · Mini- & Micro-LED Displays 2022: Markets, Manufacturing Innovations, Applications, Promising Start-ups
- ▶ How do we scale electro-hydrodynamic printing from single-nozzle repair tools to high-throughput display mass production? · Mini- & Micro-LED Displays 2022: Markets, Manufacturing Innovations, Applications, Promising Start-ups


