top of page

Giovanni Obando

Voltera

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Giovanni Obando | Voltera: How does positive mechanical displacement compare to pneumatic and auger systems in high-viscosity direct ink writing?

14:10 - 15:51

Other snippets from this talk

Summary of the clip:

How does positive mechanical displacement compare to pneumatic and auger systems in high-viscosity direct ink writing?

A motor or driven piston provides mechanical displacement. In this machine, a plunger pushes onto the white piston inside the cartridge, pressurising the material and sending it through a pressure sensor before extrusion from a single nozzle diameter. Flow rate is controlled by the motion of that displacement element. The benefits are high accuracy and repeatability each stroke, because a rotation dispenses a predictable volume.

It handles a wide range of viscosities, including paste adhesives and other high-viscosity materials, unaffected by back pressure or reservoir level. Continuous or dot dispensing depends on programming. The drawbacks are slower maximum speed than jetting or pneumatic dispensing, poor suitability for ultra-low viscosities in the inkjet range, more complex hardware, and higher cost from motor seals and moving parts. The x, y, z gantry system also feeds into printer cost.

Comparing the options: pneumatic dispensing is cheapest but inconsistent and clog prone, while auger valve dispensing is precise but sensitive to particle size. Mechanical displacement controls flow rate through the motion of the displacement element, so each rotation dispenses a predictable volume. It is unaffected by back pressure or reservoir level, handles paste adhesives and other high-viscosity materials, and can do continuous or dot dispensing depending on programming, but hardware complexity and moving parts raise cost and lower maximum speed.

In this short video, you can learn:
* Positive displacement dispensing controls flow rate by the motion of a motor or driven piston, giving high accuracy and repeatability with a predictable volume per rotation.
* It suits high-viscosity paste adhesives and is unaffected by back pressure or reservoir level, but is slower than jetting or pneumatic dispensing and not ideal for ultra-low viscosities in the inkjet range.
* Pneumatic dispensing is cheapest but inconsistent and clog prone, while auger valve dispensing is precise but sensitive to particle size.

📋 **Clip Abstract** This segment contrasts positive mechanical displacement with pneumatic and auger dispensing for direct ink writing. It details cartridge pressurisation, pressure sensing, single-nozzle extrusion, viscosity range, speed limits, hardware complexity and cost drivers in an x, y, z gantry system.

About the speaker:
* Speaker: Giovanni Obando
* Company: Voltera
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#DirectInkWrite, #PositiveDisplacement, #PasteAdhesives, #PredictableVolumeDispensing, #PrintedElectronics, #AdditiveManufacturing

This is a highlight of the presentation:

Advancements in Printed Electronics Prototyping: Direct Ink Write Technology for Printed Multi-Layer Flexible Electronics

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

08:53 - 10:01

What are the viscosity limits, cost trade-offs, and scaling limitations of Direct Ink Writing for printed electronics prototyping?

What are the viscosity limits, cost trade-offs, and scaling limitations of Direct Ink Writing for printed electronics prototyping?

Direct ink writing is a digital massless, nozzle-based extrusion method for viscous and paste-like materials. It suits functional materials and fine features, but is typically slower and less precise. For rapid prototyping, it is one of the most ideal methods. Its viscosity range is very wide, more than a thousand centipoise. A direct-write R&D printer recommends 1000 to a million centipoise. Cost of setup is low to moderate: simple dispensing setups, but slower throughput.

The process handles a broad range of materials from conductive pastes to dielectrics to adhesives, epoxies, and prototyping. That material flexibility is why prototyping is labeled excellent. The digital process handles many materials and remains flexible for functional inks. However, it should be noted that it is too slow for scaling. Setup cost is low to moderate, with simple dispensing setups, but throughput is slower.

Direct ink writing's viscosity range is very wide, about more than a thousand centipoise, and the direct-write R&D printer recommends 1000 to a million centipoise. It is a nozzle-based extrusion for viscous and paste-like materials, suited to functional materials and fine features. The method is typically slower and less precise, but for rapid prototyping it is one of the most ideal methods. Its broad material range includes conductive pastes, dielectrics, adhesives and epoxies.

In this short video, you can learn:
* Direct ink writing uses nozzle-based extrusion for viscous and paste-like materials, with a recommended viscosity window of 1000 to a million centipoise.
* It handles conductive pastes, dielectrics, adhesives and epoxies, with low-to-moderate setup cost but slower throughput.
* The method is excellent for rapid prototyping and functional materials, yet it is too slow for scaling.

📋 **Clip Abstract** Direct ink writing is a digital massless, nozzle-based extrusion process for viscous and paste-like materials, with a viscosity range from 1000 to a million centipoise. It offers low-to-moderate setup cost and excellent rapid prototyping across conductive pastes, dielectrics, adhesives and epoxies, but remains too slow for scaling.

About the speaker:
* Speaker: Giovanni Obando
* Company: Voltera
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#DirectInkWriting, #ConductivePastes, #DirectWritePrinter, #RapidPrototyping, #PrintedElectronics, #AdditiveElectronics

22:44 - 24:57

What are the material trade-offs, curing challenges, and cost differences between copper and gold conductive inks?

What are the material trade-offs, curing challenges, and cost differences between copper and gold conductive inks?

Conductive copper inks contain copper nanoparticles similar to silver, or flakes dispersed in a polymer binder. They are attractive as a lower cost alternative to silver. The pros include much lower cost than silver, good electrical conductivity, and a lower carbon footprint than silver. However, copper easily oxidizes, which reduces its conductivity and reliability. Advancements are now being made in copper ink. Still, copper ink offerings are not as broad as silver, and silver is more widely available at this time.

Copper ink does often require specialized curing or post-processing techniques. For example, you may need to bake the material for a few minutes and then quickly sinter it with some sort of heat press. That is not something you need to do with silver; silver is just in the oven cured for a certain amount of time. Additional steps may be required to work with copper, and even protective coatings to make sure it does not oxidize as easily. The process is more challenging consistently.

Conductive gold ink uses gold nanoparticles or flakes. Gold is less common than silver or copper due to its cost, but it is valued in applications requiring biocompatibility and long-term stability. Pros include excellent electrical conductivity, chemically inert, does not oxidize or tarnish, high reliability in harsher environments, and biocompatibility suitable for medical applications. Cons are very, very high cost, limited availability for large scale use, and typically only used in specialized high value applications. Carbon inks use graphene, carbon black, or carbon nanotubes, while not as conductive.

In this short video, you can learn:
* Copper inks offer much lower cost and lower carbon footprint than silver but oxidize easily, reducing conductivity and reliability.
* Copper ink requires specialized curing or post-processing like baking then heat-press sintering, plus protective coatings, unlike silver which is oven cured.
* Gold ink provides excellent conductivity, chemical inertness, and biocompatibility for medical applications, but its very high cost and limited availability restrict it to specialized high value uses.

📋 **Clip Abstract** Copper conductive inks provide a lower-cost, lower-carbon alternative to silver but oxidize easily and need specialized curing, such as baking followed by heat-press sintering, plus protective coatings. Gold inks offer excellent conductivity, chemical inertness, and biocompatibility for medical applications, yet their very high cost and limited large-scale availability confine them to specialized high-value uses.

About the speaker:
* Speaker: Giovanni Obando
* Company: Voltera
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#CopperInk, #GoldInk, #HeatPressSintering, #ProtectiveCoatings, #PrintedElectronics, #ConductiveInks

17:16 - 18:47

What are the critical rheological and particle size rules required to prevent clogging in direct ink writing?

What are the critical rheological and particle size rules required to prevent clogging in direct ink writing?

Shear thinning behaviour: the ink flows when pressure is applied and quickly recovers viscosity after dispensing. This is the type of shear response wanted from these materials. A high storage modulus allows ink to hold its shape after dispensing, which is very important for direct ink writing. These two rheological requirements govern how a deposited line behaves once it leaves the nozzle.

Particle size dictates nozzle diameter. The largest particles in a particle size distribution should not exceed one seventh of the diameter of the nozzle to enable smooth flow. If particle size is 10 microns, multiplying by seven to ten points to a 70 to 100 micron nozzle diameter to avoid any clogging. The ratio, not a fixed micron figure, is what protects the nozzle.

Post-processing and substrate selection complete the picture. Inks differ in curing profile: there are UV curable inks, thermally cured inks, and some that air dry. Post-processing directly affects mechanical and electrical properties, which is why data sheets state time and temperature for maximum performance. Substrates vary with formulation, and ink properties such as solvents used in processing requirements must be considered when choosing a material.

In this short video, you can learn:
* Shear thinning inks flow under pressure and quickly recover viscosity after dispensing, which is the shear response required.
* A high storage modulus lets dispensed ink hold its shape, a critical property for direct ink writing.
* The largest particle in a distribution must stay below one seventh of the nozzle diameter; a 10 micron particle implies a 70 to 100 micron nozzle.

📋 **Clip Abstract** Shear thinning, rapid viscosity recovery and a high storage modulus define the rheology that direct ink writing needs for shape retention. The largest particles must not exceed one seventh of the nozzle diameter—10 micron particles demand a 70 to 100 micron nozzle—while curing profile, post-processing time and temperature, and substrate selection determine final mechanical and electrical properties.

About the speaker:
* Speaker: Giovanni Obando
* Company: Voltera
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

🗓️ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#DirectInkWrite, #ShearThinningInks, #ParticleSizeDistribution, #InkCuringProfiles, #PrintedElectronics, #AdditiveElectronics

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page