top of page

Lina Kadura

CEA

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Lina Kadura | CEA: Does switching from subtractive to additive PCB manufacturing really cut carbon footprint, and by how much?

09:55 - 11:40

Other snippets from this talk

Summary of the clip:

Does switching from subtractive to additive PCB manufacturing really cut carbon footprint, and by how much?

In subtractive multi-layering, you need to etch separate layers and stack them together at the end. Additive manufacturing starts from one substrate and builds on top, additively printing all necessary layers. This simplifies the process, reduces the number of steps, and brings a lower thermal budget. From the assembly point of view, there is not really any difference, apart from not using soldering because of the temperature budget.

The assembly is being proofed with a partner, an EMS that is doing it for FR4, and it works kind of the same for additive manufacturing as well. The drivers are thermal budget, reduced number of steps, and reduced material usage; this is why printed electronics seems to be interesting. Literature is trying to quantify the disadvantage from an LCA point of view.

What the literature shows is that just by going from subtractive to additive, without even changing the materials, we are gaining 50% in GWP. If you also change the materials, so additive plus changing the materials, you can go up to 80%. But this calculation really depends on your application, your functional unit, and the scope of your LCA. So this is what we are going to try and quantify for our additive manufacturing.

In this short video, you can learn:
* Additive PCB manufacturing builds layers on a single substrate instead of etching and stacking separate layers.
* Moving from subtractive to additive alone can yield a 50% GWP gain, while changing materials can push it up to 80%.
* The LCA result depends on application, functional unit, and scope, so it must be quantified per process.

πŸ“‹ **Clip Abstract** This clip compares subtractive multi-layer PCB processing with additive manufacturing, where layers are printed on one substrate. It reports literature LCA figures of 50% GWP reduction from additive alone and up to 80% with material changes, while noting dependence on application, functional unit, and scope.

About the speaker:
* Speaker: Lina Kadura
* Company: CEA
* Event: The Future of Electronics RESHAPED 2025
* Location: Estrel, Berlin

πŸ—“οΈ Save the date for the next Future of Electronic RESHAPED conference and exhibition
USA | Mountain View | 9-10 June 2027 : https://www.techblick.com/electronicsreshapedusa
Europe | Berlin | 20-21 October 2027: https://www.techblick.com/electronicsreshaped

#AdditiveLayerPrinting, #SubtractiveLayerStacking, #MaterialChangeGWP, #LowerThermalBudget, #PrintedElectronics, #SustainableElectronics

This is a highlight of the presentation:

Advancing PCB Technology Through Additive Manufacturing: Process, Sustainability, and Reliability

The Future of Electronics RESHAPED 2025 | Berlin

​

22-23 October 2025

Estrel, Berlin

Organised By:

TechBlick

​

More Highlights from the same talk.

04:37 - 06:04

How much GWP reduction does additive PCB manufacturing deliver versus conventional FR4 boards?

How much GWP reduction does additive PCB manufacturing deliver versus conventional FR4 boards?

There is no stacking involved: everything is printed on both sides of the substrate. The life-cycle results come from a partner in Ecotron, using the methodology shown on screen and the Ecoinvent database. Partner ITENE normalised all results against the conventional PCB, the blue reference, then modelled two scenarios on top of that baseline.

Generation one, the brown bars, changes only the process while end-of-life stays identical, meaning both boards are incinerated, and it already gains about 50% in GWP. Generation two pushes the project's limits: one partner recycles the PCB, separating the PET from the silver, and another partner purifies that silver, so everything is assumed recycled.

The extra gain in generation two comes from two factors, PET production and silver, both now recycled, taking total GWP reduction from 50% to 60%. The Ecotron assessment also assumed an industrial scale, because every underlying measurement is lab-scale data rather than production data.

In this short video, you can learn:
* Normalised against the conventional PCB with an incineration end-of-life, the first-generation process alone already delivers roughly 50% GWP reduction.
* Separating PET from silver and purifying the silver lifts the total GWP gain to between 50% and 60%.
* All measurements are lab-scale, so the Ecotron assessment assumed industrial scale to make the comparison.

πŸ“‹ **Clip Abstract** A life-cycle assessment normalised against the conventional PCB shows that switching to a printed, double-sided, stack-free process cuts GWP by about 50% with end-of-life unchanged. Adding PET separation and silver purification pushes the reduction to 50-60%, though the figures rest on lab-scale data scaled to industrial production.

About the speaker:
* Speaker: Lina Kadura
* Company: CEA- Liten
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#AdditivePCB, #EcoinventLCA, #SilverPurification, #GWPReduction, #PrintedElectronics, #SustainableElectronics

10:26 - 12:09

What makes screen-printed PCB fabrication a European re-industrialization opportunity?

What makes screen-printed PCB fabrication a European re-industrialization opportunity?

Subtractive versus additive is the obvious fabrication split, but the real point here is geography: both fabrication and materials are massively dominated by Asia. Even European PCB manufacturers hit a bottleneck on FR4 and cover. That dependency is reframed as an opportunity, because the ink and substrate providers are still quite European, which is the materials base for re-industrializing PCB production on the continent.

Screen printing is the chosen route at CEA, picked for high throughput, low cost and large-surface manufacturing, and upscalable through sheet-to-sheet or roll-to-roll. Inks span silver, copper-based and carbon systems. The resolution achieved today is documented, with headroom to go lower. The caveat: resolution must be managed by layer stacking and reproducibility once you target increasingly complex PCBs.

Beyond cost, screen printing is described as versatile: it offers a design flexibility that conventional PCB does not, expressed at the level of individual layers. Combine that with a still-European ink and substrate base, and screen-printed PCB fabrication becomes a re-industrialization argument, not simply a substitution of one deposition method for another.

In this short video, you can learn:
* Both PCB fabrication and its materials are massively dominated by Asia, leaving even European manufacturers with an FR4 and cover bottleneck.
* Screen printing was selected for high throughput, low cost, large surface area and sheet-to-sheet or roll-to-roll upscalability.
* Resolution must be handled through layer stacking and reproducibility as PCB complexity rises.

πŸ“‹ **Clip Abstract** Additive screen printing replaces the subtractive flow, but the strategic point is supply: FR4 and cover stock come from Asia while inks and substrates remain largely European. CEA's screen-printing route, using silver, copper or carbon and upscalable sheet-to-sheet or roll-to-roll, trades resolution headroom for throughput and layer-level design freedom.

About the speaker:
* Speaker: Lina Kadura
* Company: CEA- Liten
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#ScreenPrinting, #AdditivePCBFabrication, #FR4SupplyChain, #LayerStacking, #PrintedElectronics, #SustainableElectronics

08:23 - 10:08

Why can't conventional PCB CAD tools automatically design-check a printed multilayer board?

Why can't conventional PCB CAD tools automatically design-check a printed multilayer board?

The schematic does not depend on the fabrication step, so it stays identical between conventional and printed technologies. The layout does not: it depends entirely on the fabrication process, the design rules you set, your layer stack, the thicknesses, and the materials you use. That is where the two flows diverge, before any board is built.

In the conventional flow you draw copper traces most of the time and do not draw the insulator, because the substrate is FR4. In printed electronics you must also lay out the dielectric insulator, since you print it as well. Vias differ too: conventionally they are drilled through all the substrates that are then stacked.

In printed electronics only the vias in the core or substrates need drilling; all the others between layers are printed, simply an area where no dielectric is deposited, so they are free β€” included directly in the dielectric layer design. The gap: no CAD tool today offers automatic design rule checking for complex printed PCBs.

In this short video, you can learn:
* Schematic capture is identical across the two technologies; only the layout depends on fabrication, design rules, layer stack, thicknesses and materials.
* Conventional FR4 design draws copper only, whereas printed electronics must also lay out the dielectric insulator that has to be printed.
* Only core and substrate vias are drilled in printed boards; interlayer vias are printed dielectric-free areas, and no CAD tool yet automatically checks such complex designs.

πŸ“‹ **Clip Abstract** Layout, not schematic, is where printed and conventional PCB design split: printed boards need the dielectric drawn and interlayer vias printed rather than drilled. Conventional CAD tools are established and efficient, but none yet offers automatic design rule checking for complex printed PCBs β€” a real limit on fabricating them.

About the speaker:
* Speaker: Lina Kadura
* Company: CEA- Liten
* Event: Sustainable Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

Sustainable Electronics RESHAPED | Berlin
πŸ“… Save the date: 20 and 21 October 2027
πŸ“ Berlin, Germany
πŸ“‹ Info: https://www.techblick.com/sustainableelectronicsreshaped

#DesignRuleCheck, #PrintedDielectric, #ViaDrilling, #LayerStackDesign, #PrintedElectronics, #SustainableElectronics

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page