top of page

Madison Maxey

Loomia Technologies

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Madison Maxey | Loomia Technologies: Why does stretching an e-textile ruin its electrical performance?

00:02:35 - 00:05:02

Other snippets from this talk

Summary of the clip:

Why does stretching an e-textile ruin its electrical performance?

The fundamental trade-off in electronic textiles lies between physical comfort and electrical performance. As materials are made softer, more flexible, and highly stretchable, their electrical stability degrades. Designers must critically assess whether an application truly requires "stretch" or if "drape" is sufficient, as avoiding unnecessary stretch allows for much more reliable electrical properties and simplified manufacturing processes.

Drape is a quantifiable material property that can be measured using a drape tester to calculate a specific drape coefficient. If an application requires conformability but not dynamic stretching, utilizing woven materials or standard printed electronics on polyester can bypass the mechanical stresses that cause electrical failure. For applications requiring stretch, the critical metric is the change in electrical resistance over percent elongation, as well as the material's hysteresis behavior over repeated cycles.

Ultimately, selecting the right technology pathway—whether it is flex PCBs, laminated TPU films, or knit/woven conductive yarns—depends entirely on these physical requirements. Understanding the boundaries of drape versus stretch prevents over-engineering and keeps product costs within commercially viable limits.

In this short video, you can learn:
* How the drape coefficient is calculated and why it matters for product design.
* Why dynamic stretch introduces severe electrical resistance challenges and hysteresis.
* How to choose between flex PCBs, wovens, and stretchable TPUs based on mechanical needs.

📋 **Clip Abstract** This clip explains the critical engineering trade-offs between mechanical drape, stretchability, and electrical performance in e-textiles. It highlights how to quantify drape and evaluate change in resistance over elongation to select the most reliable substrate technology.

#DrapeCoefficient, #ElectricalHysteresis, #StretchableTPU, #ConductiveYarns, #PrintedElectronics, #WearableElectronics

This is a highlight of the presentation:

​

The Future of Electronics RESHAPED 2023 Berlin

Electronics RESHAPED Europe

​

Estrel Congress Centre, Berlin, Germany, Europe

Organised By:

TechBlick

​

More Highlights from the same talk.

03:21 - 05:02

What makes a 113-point pressure-sensing e-textile glove more robust than flex PCB sensors on a bionic hand?

What makes a 113-point pressure-sensing e-textile glove more robust than flex PCB sensors on a bionic hand?

Festo, a robotics company, wanted more robust sensors on the digits of its bionic hand. A flex PCB is generally designed for unidirectional flex; it is not intended to move back and forth and up and down like a finger. Switching to electronic textiles provided drapability and multi-axis plugs from the textile for the robotic hand.

Development runs through a two-phase lab program. The first phase is research and development: sourcing different materials, testing, staying in touch with the customer, and iterating. The second phase is fabrication: making the proof of concept and handing over a functional prototype that the customer can then test and validate. That functional prototype is shown during the walkthrough.

The pressure-sensitive matrix glove developed for Festo has a 113-point pressure matrix, with design and production done for the project. It also includes a backlit logo as a decorative feature and a fully integrated PCB. These features sit within a textile-based glove intended for the bionic hand’s digits.

In this short video, you can learn:
* Flex PCBs are typically limited to unidirectional flex, so they do not match the back-and-forth and up-and-down motion of a finger.
* The development process separates research and development material sourcing and customer iteration from fabrication of a functional proof-of-concept prototype.
* The resulting pressure-sensitive matrix glove has 113 pressure points, a decorative backlit logo and a fully integrated PCB.

📋 **Clip Abstract** A bionic-hand project with Festo required more robust digit sensors than flex PCB constructions could provide, so electronic textiles supplied drapability and multi-axis plugs. The two-phase process moved from material sourcing and customer iteration to fabrication of a 113-point pressure-matrix glove with a backlit logo and integrated PCB.

About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online

Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/

#PressureSensingMatrix, #FlexPCB, #BionicHandSensors, #FunctionalPrototype, #ETextiles, #WearableSensors

12:09 - 13:32

What does fully textile-integrated sensing add to SoftHand 2 versus flexboard finger sensors?

What does fully textile-integrated sensing add to SoftHand 2 versus flexboard finger sensors?

SoftHand 1 placed tactile sensors in the fingers using flexboards, but that approach was not robust enough. For SoftHand 2, the sensing moved completely into the textile. This change delivered robust sensor technology and allowed more sensors to be added. The comparison is therefore not just packaging: the textile integration is the route to a more robust tactile system with higher sensor count.

SoftHand 1 had about 15 pressure sensors, all in the fingers. SoftHand 2 adds pressure sensors in the palm as well as the fingers, arranged in a matrix structure. The matrix is more finely resolved at the fingertips and has broader resolution on the inside of the fingers. Pressing the sensors shows they are sensitive, and the sensitivity is adjustable.

The positioning sensors in the fingers were also improved. They are now integrated directly in the fingers and are bending sensors. They measure the 2 degrees of freedom in the fingers, the front part and the back part. This gives more robust performance compared with the sensors used last year, extending the textile-integration argument beyond tactile pressure sensing to finger-position measurement.

In this short video, you can learn:
* Flexboard-mounted tactile sensors in SoftHand 1 were not robust enough, so SoftHand 2 moved the sensors completely into the textile.
* SoftHand 2 adds palm pressure sensors and uses a matrix structure with finer fingertip resolution and broader resolution inside the fingers.
* Bending sensors integrated directly in the fingers measure 2 degrees of freedom, front and back, for more robust performance than last year's sensors.

📋 **Clip Abstract** SoftHand 2 replaces flexboard-mounted finger tactile sensors with sensors completely integrated in the textile, producing a more robust system with more sensors. It adds palm pressure sensors in a matrix with finer fingertip and broader inner-finger resolution, adjustable sensitivity, and directly integrated bending sensors measuring 2 degrees of freedom.

About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online

Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/

#SoftHand2, #TextileIntegratedTactileSensors, #PressureSensorMatrix, #FingerBendingSensors, #Etextiles, #RoboticSensing

08:01 - 10:18

How do you iterate from fabric and single-finger prototypes to a full-hand pressure matrix and PCB layout?

How do you iterate from fabric and single-finger prototypes to a full-hand pressure matrix and PCB layout?

Fabric selection came first, early enough to test how chosen fabrics would work with the glove’s internal pressure sensors. Several materials were sourced, and colorways were developed alongside an image of the glove so the circuit could match its shape and size. The glove design then included a pleating structure to work around the pneumatic system before circuit design began.

Circuit development started with single fingers: “finger hats” built from the long-term performance fabrics, with pressure sensors inside, let the team see performance at a small scale. They then expanded matrix design to a full hand, examining how all fingers would interact and how to make a matrix that gave sensing on each finger for the robotic hand.

Digital rendering and physical prototyping were combined to place simple sensors on different palm areas and matrices on different finger areas. Sensor locations were then marked with graphics on the glove, making each sensor findable for researchers’ testing. PCB integration was another major consideration: all matrix lines had to pull into a printed circuit board, and several different shapes were tried.

In this short video, you can learn:
* Early fabric selection let the team understand how performance fabrics would interact with the glove’s internal pressure sensors.
* Single-finger “finger hats” served as small-scale pressure-sensor prototypes before expanding to a full-hand matrix.
* All matrix lines had to route into an integrated PCB, prompting trials of multiple board shapes.

📋 **Clip Abstract** The development began with fabric and colorway selection, a glove image and pleating for the pneumatic system, then moved into circuit design. Single-finger pressure-sensor “finger hats” preceded a full-hand matrix, with digital renderings, physical prototypes, sensor-location graphics and matrix lines routed into a PCB.

About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online

Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/

#PressureSensorMatrix, #FingerHatPrototyping, #PneumaticGloveDesign, #SensorLocationGraphics, #ElectronicTextiles, #WearableSensors


Other talks by Madison Maxey


More highlights from Madison Maxey

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page