Madison Maxey | Loomia Technologies: How do you engineer an electric vehicle sunroof that rolls, heats, and lights up?
00:13:20 - 00:15:16
Other snippets from this talk
Summary of the clip:
How do you engineer an electric vehicle sunroof that rolls, heats, and lights up?
Electric vehicles present a unique thermal management challenge because they lack the waste heat of internal combustion engines. To keep passengers comfortable efficiently, automotive designers are turning to localized surface heating. Integrating heating elements and programmable lighting into a roll-up sunroof, however, requires materials that can survive tight-radius bending without mechanical or electrical fatigue.
Traditional flexible PCBs on Kapton lack the necessary drapability and flex life for a roll-up mechanism, risking cracking over repeated cycles. By using thermoplastic polyurethane (TPU) films combined with multi-layer stackups, engineers can integrate both resistive heating traces and programmable LED arrays into a single, cohesive, foldable textile component. This approach maintains a thin, automotive-grade profile while ensuring robust performance.
Achieving thermal efficiency in these systems requires precise control over circuit geometry. Modulating the trace width allows engineers to customize the resistance across the surface, optimizing heat distribution while minimizing power consumption. This multi-layer integration demonstrates how e-textiles can solve complex packaging and thermal challenges in modern EV cabins.
In this short video, you can learn:
* Why the lack of internal combustion engine waste heat in EVs is driving surface-heating innovation.
* How multi-layer TPU stacks enable the co-integration of lighting and heating in folding automotive parts.
* How modulating conductive trace widths optimizes thermal efficiency and power consumption.
đź“‹ **Clip Abstract** This clip details the development of an automotive roll-up sunroof demonstrator featuring co-integrated heating and lighting. It shows how multi-layer TPU laminates overcome the mechanical limitations of flex PCBs in tight-radius, high-cycle environments.
#TPULaminates, #ResistiveHeatingTraces, #ElectronicTextiles, #PrintedElectronics, #EVThermalManagement, #AutomotiveSmartSurfaces
This is a highlight of the presentation:
More Highlights from the same talk.
03:21 - 05:02
What makes a 113-point pressure-sensing e-textile glove more robust than flex PCB sensors on a bionic hand?
What makes a 113-point pressure-sensing e-textile glove more robust than flex PCB sensors on a bionic hand?
Festo, a robotics company, wanted more robust sensors on the digits of its bionic hand. A flex PCB is generally designed for unidirectional flex; it is not intended to move back and forth and up and down like a finger. Switching to electronic textiles provided drapability and multi-axis plugs from the textile for the robotic hand.
Development runs through a two-phase lab program. The first phase is research and development: sourcing different materials, testing, staying in touch with the customer, and iterating. The second phase is fabrication: making the proof of concept and handing over a functional prototype that the customer can then test and validate. That functional prototype is shown during the walkthrough.
The pressure-sensitive matrix glove developed for Festo has a 113-point pressure matrix, with design and production done for the project. It also includes a backlit logo as a decorative feature and a fully integrated PCB. These features sit within a textile-based glove intended for the bionic hand’s digits.
In this short video, you can learn:
* Flex PCBs are typically limited to unidirectional flex, so they do not match the back-and-forth and up-and-down motion of a finger.
* The development process separates research and development material sourcing and customer iteration from fabrication of a functional proof-of-concept prototype.
* The resulting pressure-sensitive matrix glove has 113 pressure points, a decorative backlit logo and a fully integrated PCB.
đź“‹ **Clip Abstract** A bionic-hand project with Festo required more robust digit sensors than flex PCB constructions could provide, so electronic textiles supplied drapability and multi-axis plugs. The two-phase process moved from material sourcing and customer iteration to fabrication of a 113-point pressure-matrix glove with a backlit logo and integrated PCB.
About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#PressureSensingMatrix, #FlexPCB, #BionicHandSensors, #FunctionalPrototype, #ETextiles, #WearableSensors
12:09 - 13:32
What does fully textile-integrated sensing add to SoftHand 2 versus flexboard finger sensors?
What does fully textile-integrated sensing add to SoftHand 2 versus flexboard finger sensors?
SoftHand 1 placed tactile sensors in the fingers using flexboards, but that approach was not robust enough. For SoftHand 2, the sensing moved completely into the textile. This change delivered robust sensor technology and allowed more sensors to be added. The comparison is therefore not just packaging: the textile integration is the route to a more robust tactile system with higher sensor count.
SoftHand 1 had about 15 pressure sensors, all in the fingers. SoftHand 2 adds pressure sensors in the palm as well as the fingers, arranged in a matrix structure. The matrix is more finely resolved at the fingertips and has broader resolution on the inside of the fingers. Pressing the sensors shows they are sensitive, and the sensitivity is adjustable.
The positioning sensors in the fingers were also improved. They are now integrated directly in the fingers and are bending sensors. They measure the 2 degrees of freedom in the fingers, the front part and the back part. This gives more robust performance compared with the sensors used last year, extending the textile-integration argument beyond tactile pressure sensing to finger-position measurement.
In this short video, you can learn:
* Flexboard-mounted tactile sensors in SoftHand 1 were not robust enough, so SoftHand 2 moved the sensors completely into the textile.
* SoftHand 2 adds palm pressure sensors and uses a matrix structure with finer fingertip resolution and broader resolution inside the fingers.
* Bending sensors integrated directly in the fingers measure 2 degrees of freedom, front and back, for more robust performance than last year's sensors.
đź“‹ **Clip Abstract** SoftHand 2 replaces flexboard-mounted finger tactile sensors with sensors completely integrated in the textile, producing a more robust system with more sensors. It adds palm pressure sensors in a matrix with finer fingertip and broader inner-finger resolution, adjustable sensitivity, and directly integrated bending sensors measuring 2 degrees of freedom.
About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#SoftHand2, #TextileIntegratedTactileSensors, #PressureSensorMatrix, #FingerBendingSensors, #Etextiles, #RoboticSensing
08:01 - 10:18
How do you iterate from fabric and single-finger prototypes to a full-hand pressure matrix and PCB layout?
How do you iterate from fabric and single-finger prototypes to a full-hand pressure matrix and PCB layout?
Fabric selection came first, early enough to test how chosen fabrics would work with the glove’s internal pressure sensors. Several materials were sourced, and colorways were developed alongside an image of the glove so the circuit could match its shape and size. The glove design then included a pleating structure to work around the pneumatic system before circuit design began.
Circuit development started with single fingers: “finger hats” built from the long-term performance fabrics, with pressure sensors inside, let the team see performance at a small scale. They then expanded matrix design to a full hand, examining how all fingers would interact and how to make a matrix that gave sensing on each finger for the robotic hand.
Digital rendering and physical prototyping were combined to place simple sensors on different palm areas and matrices on different finger areas. Sensor locations were then marked with graphics on the glove, making each sensor findable for researchers’ testing. PCB integration was another major consideration: all matrix lines had to pull into a printed circuit board, and several different shapes were tried.
In this short video, you can learn:
* Early fabric selection let the team understand how performance fabrics would interact with the glove’s internal pressure sensors.
* Single-finger “finger hats” served as small-scale pressure-sensor prototypes before expanding to a full-hand matrix.
* All matrix lines had to route into an integrated PCB, prompting trials of multiple board shapes.
📋 **Clip Abstract** The development began with fabric and colorway selection, a glove image and pleating for the pneumatic system, then moved into circuit design. Single-finger pressure-sensor “finger hats” preceded a full-hand matrix, with digital renderings, physical prototypes, sensor-location graphics and matrix lines routed into a PCB.
About the speaker:
* Speaker: Madison Maxey
* Company: Loomia
* Event: Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
* Location: Online
Join TechBlick - for the leading global event on wearable electronics
https://www.techblick.com/
#PressureSensorMatrix, #FingerHatPrototyping, #PneumaticGloveDesign, #SensorLocationGraphics, #ElectronicTextiles, #WearableSensors
Other talks by Madison Maxey
- Integration Techniques for Electronic Textiles: Bridging Hard and Soft Materials · The Future of Electronics RESHAPED 2024 USA
- The Electronic Textile Landscape: Use Cases, Technologies and More · The Future of Electronics RESHAPED | Berlin 2023
- E-textiles in Robotics: A Case Study · Electronic Textiles & Skin Patches: Hardware & Software 2021
More highlights from Madison Maxey
- ▶ Why does stretching an e-textile ruin its electrical performance? · The Future of Electronics RESHAPED 2023 Berlin
- ▶ Why did a $22M military e-textile project reject printed electronics? · The Future of Electronics RESHAPED 2023 Berlin
- ▶ What makes a 113-point pressure-sensing e-textile glove more robust than flex PCB sensors on a bionic hand? · Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
- ▶ How do you iterate from fabric and single-finger prototypes to a full-hand pressure matrix and PCB layout? · Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021
- ▶ What does fully textile-integrated sensing add to SoftHand 2 versus flexboard finger sensors? · Electronic Textiles, Wearable Sensors & Printed/Flexible Sensors 2021


