top of page

Rudy Ghosh

NovaCentrix

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Rudy Ghosh | NovaCentrix: Why are traditional copper and silver printed electronics failing in the next generation of biocompatible sensors?

00:03:05 - 00:04:36

Other snippets from this talk

Summary of the clip:

Why are traditional copper and silver printed electronics failing in the next generation of biocompatible sensors?

In the world of printed electronics, moving away from bulk materials introduces severe physical challenges. While bulk copper is highly conductive, micro- and nano-scale porous networks of copper suffer from rapid oxidation, significantly reducing reliability. Silver inks have historically served as the benchmark for environmental stability and conductivity, but they still fall short when exposed to corrosive biological environments or placed in direct contact with living tissue.

To bridge this gap, gold nanoparticle inks have emerged as a disruptive material class. Gold offers unmatched oxidation resistance and superb chemical inertness, making it uniquely suited for high-reliability applications. Crucially, its inherent biocompatibility allows printed circuits to interface directly with biological systems without triggering adverse reactions or material degradation.

NovaCentrix's gold ink platform caters to these diverse processing demands by offering both high and low viscosity formulations. High-viscosity formulations are engineered for screen printing and direct-write dispensing, while low-viscosity dispersions are optimized for high-resolution aerosol jetting, inkjet printing, and flexographic systems, giving manufacturers a versatile additive toolset.

In this short video, you can learn:
* Why porous copper networks fail due to oxidation and how silver acts as an intermediate fix.
* The key chemical and biological advantages of gold nanoparticle inks over traditional materials.
* How formulation viscosity is tailored for screen printing, inkjet, and aerosol jet systems.

📋 **Clip Abstract** This clip explores the transition from copper and silver to gold nanoparticle inks for high-reliability printed electronics. It explains how gold overcomes oxidation challenges and enables direct biocompatibility for medical sensors and devices.

#GoldNanoparticleInks, #BiocompatibleSensors, #AerosolJetPrinting, #ConductiveInks, #PrintedElectronics, #Bioelectronics

This is a highlight of the presentation:

​

Additive, Sustainable or 3D Electronics Innovations Day 2025

Perovskites Innovation Day 2025

04.04.2025

TechBlick Online Platform

Organised By:

TechBlick

​

More Highlights from the same talk.

03:18 - 04:14

How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?

How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?

The ink family spans a wide viscosity range, from hundreds of centipoise to hundreds of thousands of centipoise. That breadth is the enabling variable: formulators can tailor an ink to a specific deposition process rather than forcing one process to accept a single fixed rheology.

At the low-viscosity end sit inkjet and aerosol jet. Flexographic and gravure printing occupy the middle range. Screen printing, direct-on-write processes and high-viscosity dispensing use the upper end. One portfolio therefore addresses process classes that normally demand different ink formulations, while customers reportedly use the entire viscosity and process range.

The portfolio is not limited to one metal system. Silver is the largest part, but copper inks are also produced. Because the same broad viscosity strategy is applied across material systems, the ink family can support multiple printing routes and multiple chemistries rather than a single silver-only, process-specific product.

In this short video, you can learn:
* Viscosity spans from hundreds to hundreds of thousands of centipoise.
* Inkjet and aerosol jet are low-viscosity, flexographic and gravure are middle-range, and screen, direct-on-write and high-viscosity dispensing are upper-range processes.
* Silver is the largest materials family, copper inks are also made, and customers use the full viscosity and process range.

📋 **Clip Abstract** The ink range covers hundreds to hundreds of thousands of centipoise and is tailored across inkjet, aerosol jet, flexographic, gravure, screen, direct-on-write and high-viscosity dispensing. Silver is the largest materials family, with copper inks also available, and customers use the full viscosity and process range.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#SilverCopperInks, #HighViscosityDispensing, #AerosolJetPrinting, #GravureScreenInks, #PrintedElectronics, #FlexibleElectronics

07:23 - 09:48

What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?

What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?

The silver-coated copper particles use two particle sizes, with D50s of three and around five microns. Stored at about four degrees Celsius, the ink is rated above six months, and actually lasts far longer. Champion data for 35% copper at 140 C is a sheet resistance below three milliohms per square per mil, or 25 microns.

That high performance holds across the whole material family, anywhere between 35% and 90% copper. The inks start becoming conductive at pretty much 80 C, which the speaker calls very desirable even for silver or copper inks. The goal is an economic architecture: changing copper-to-silver percentage tunes electrical properties for cost-sensitive applications that do not need very high conductivity.

At 90% copper, sheet resistance is 24 milliohms per square per mil, still described as very good. Because the system focuses on lower temperatures, it suits low-temperature substrates such as PET, fabric, TPU and paper. The speaker begins another copper-related point with 'very good' before the clip ends.

In this short video, you can learn:
* At 35% copper and 140 C, the champion sheet resistance is below three milliohms per square per mil at 25 microns.
* The 35% to 90% copper family becomes conductive at about 80 C and tunes conductivity by copper-to-silver ratio.
* At 90% copper, sheet resistance reaches 24 milliohms per square per mil for cost-sensitive, low-temperature substrates like PET, fabric, TPU and paper.

📋 **Clip Abstract** Silver-coated copper inks span 35% to 90% copper, with two particle sizes (D50s of three and around five microns) and more than six months at about four degrees Celsius. Champion 35% copper at 140 C gives below three milliohms per square per mil, while 90% copper gives 24 milliohms per square per mil, enabling lower-temperature substrates such as PET, fabric, TPU and paper.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#SilverCoatedCopper, #SheetResistance, #CopperSilverRatio, #LowTemperatureSubstrates, #PrintedElectronics, #FlexibleElectronics

05:55 - 07:25

What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?

What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?

A range of materials, not a single ink, lets the silver-to-copper ratio be used to tune both the material and its electrical properties. The design target across the family is high conductivity and high performance even at low processing temperatures. Data sheets summarising what each grade delivers were taken directly from the technical documentation.

These inks sit in the high-viscosity range, which puts them in screen printing and direct ink or direct writing territory rather than inkjet. Metal loading is very, very high at 87%, so a jar is noticeably heavy and feels strongly viscous when stirred. That loading figure is the headline number for the family.

For screen printing, practical handling matters as much as the data: the inks clean up easily with IPA and similar solvents. Shelf life is long provided the material is kept in a fridge at around four degrees Celsius, which protects the formulation between print runs.

In this short video, you can learn:
* The silver-to-copper ratio is the lever used to tune material and electrical properties across the ink family.
* At 87% metal loading the inks are high viscosity, aimed at screen printing and direct writing rather than inkjet.
* IPA clean-up and refrigerated storage at about 4 degrees Celsius underpin the long shelf life.

📋 **Clip Abstract** A family of silver-coated copper inks uses the silver-to-copper ratio to tune material and electrical behaviour while targeting high conductivity and high performance at low processing temperatures. At 87% metal loading they fall in the high-viscosity range for screen printing and direct writing, clean up with IPA and hold a long shelf life when refrigerated at around 4 degrees Celsius.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#SilverCoatedCopper, #HighMetalLoading, #ScreenPrintingInks, #DirectInkWriting, #PrintedElectronics, #ConductiveInks


Other talks by Rudy Ghosh


More highlights from Rudy Ghosh

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page