Rudy Ghosh | NovaCentrix: What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?
05:55 - 07:25
Other snippets from this talk
Summary of the clip:
What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?
A range of materials, not a single ink, lets the silver-to-copper ratio be used to tune both the material and its electrical properties. The design target across the family is high conductivity and high performance even at low processing temperatures. Data sheets summarising what each grade delivers were taken directly from the technical documentation.
These inks sit in the high-viscosity range, which puts them in screen printing and direct ink or direct writing territory rather than inkjet. Metal loading is very, very high at 87%, so a jar is noticeably heavy and feels strongly viscous when stirred. That loading figure is the headline number for the family.
For screen printing, practical handling matters as much as the data: the inks clean up easily with IPA and similar solvents. Shelf life is long provided the material is kept in a fridge at around four degrees Celsius, which protects the formulation between print runs.
In this short video, you can learn:
* The silver-to-copper ratio is the lever used to tune material and electrical properties across the ink family.
* At 87% metal loading the inks are high viscosity, aimed at screen printing and direct writing rather than inkjet.
* IPA clean-up and refrigerated storage at about 4 degrees Celsius underpin the long shelf life.
๐ **Clip Abstract** A family of silver-coated copper inks uses the silver-to-copper ratio to tune material and electrical behaviour while targeting high conductivity and high performance at low processing temperatures. At 87% metal loading they fall in the high-viscosity range for screen printing and direct writing, clean up with IPA and hold a long shelf life when refrigerated at around 4 degrees Celsius.
About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
๐
Save the date: 9 and 10 June 2027
๐ Mountain View, California (Silicon Valley)
๐ Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
๐
Save the date: 20 and 21 October 2027
๐ Berlin, Germany
๐ Info: https://www.techblick.com/electronicsreshaped
#SilverCoatedCopper, #HighMetalLoading, #ScreenPrintingInks, #DirectInkWriting, #PrintedElectronics, #ConductiveInks
This is a highlight of the presentation:
High-Performance, Low-Cost Silver-Coated Copper Inks for Flexible and Printed Electronics
More Highlights from the same talk.
03:18 - 04:14
How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?
How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?
The ink family spans a wide viscosity range, from hundreds of centipoise to hundreds of thousands of centipoise. That breadth is the enabling variable: formulators can tailor an ink to a specific deposition process rather than forcing one process to accept a single fixed rheology.
At the low-viscosity end sit inkjet and aerosol jet. Flexographic and gravure printing occupy the middle range. Screen printing, direct-on-write processes and high-viscosity dispensing use the upper end. One portfolio therefore addresses process classes that normally demand different ink formulations, while customers reportedly use the entire viscosity and process range.
The portfolio is not limited to one metal system. Silver is the largest part, but copper inks are also produced. Because the same broad viscosity strategy is applied across material systems, the ink family can support multiple printing routes and multiple chemistries rather than a single silver-only, process-specific product.
In this short video, you can learn:
* Viscosity spans from hundreds to hundreds of thousands of centipoise.
* Inkjet and aerosol jet are low-viscosity, flexographic and gravure are middle-range, and screen, direct-on-write and high-viscosity dispensing are upper-range processes.
* Silver is the largest materials family, copper inks are also made, and customers use the full viscosity and process range.
๐ **Clip Abstract** The ink range covers hundreds to hundreds of thousands of centipoise and is tailored across inkjet, aerosol jet, flexographic, gravure, screen, direct-on-write and high-viscosity dispensing. Silver is the largest materials family, with copper inks also available, and customers use the full viscosity and process range.
About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
๐
Save the date: 9 and 10 June 2027
๐ Mountain View, California (Silicon Valley)
๐ Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
๐
Save the date: 20 and 21 October 2027
๐ Berlin, Germany
๐ Info: https://www.techblick.com/electronicsreshaped
#SilverCopperInks, #HighViscosityDispensing, #AerosolJetPrinting, #GravureScreenInks, #PrintedElectronics, #FlexibleElectronics
10:50 - 12:18
How does tuning a silver-coated copper ink balance near-silver conductivity against copperโs lower cost?
How does tuning a silver-coated copper ink balance near-silver conductivity against copperโs lower cost?
The ink system is tuned by changing material properties, giving direct control over electrical properties and over the price point. That price control matters because silverโs price rose quickly at the end of last year, making material-cost sensitivity a live design constraint for printed conductors.
Electrically, the conductivity ranges come pretty close to silver ink results at low temperatures, although copper is the core material. The system also shows very good stability over time in ambient conditions, so low-temperature conductivity is paired with ambient stability rather than traded against it.
The practical choice is an ink that combines silverโs high performance with copperโs lower cost. Users can move across the spectrum: a very low-cost option at one end, or something with very good performance at the other, within the same tunable material system.
In this short video, you can learn:
* Electrical properties are tuned by changing material properties, not by accepting a fixed ink formulation.
* Conductivity approaches silver ink results at low temperatures even though copper is the core material.
* The same system spans a very low-cost option to very good performance by combining silver performance with copper cost.
๐ **Clip Abstract** A tunable silver-coated copper ink system is presented as a way to control electrical properties and price point together. Conductivity ranges approach low-temperature silver ink results while the copper core provides lower cost, ambient stability and a selectable trade-off between low cost and high performance.
About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
๐
Save the date: 9 and 10 June 2027
๐ Mountain View, California (Silicon Valley)
๐ Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
๐
Save the date: 20 and 21 October 2027
๐ Berlin, Germany
๐ Info: https://www.techblick.com/electronicsreshaped
#SilverCoatedCopperInk, #LowTemperatureConductivity, #AmbientStability, #ConductiveInkTunability, #PrintedElectronics, #FlexibleElectronics
07:23 - 09:48
What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?
What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?
The silver-coated copper particles use two particle sizes, with D50s of three and around five microns. Stored at about four degrees Celsius, the ink is rated above six months, and actually lasts far longer. Champion data for 35% copper at 140 C is a sheet resistance below three milliohms per square per mil, or 25 microns.
That high performance holds across the whole material family, anywhere between 35% and 90% copper. The inks start becoming conductive at pretty much 80 C, which the speaker calls very desirable even for silver or copper inks. The goal is an economic architecture: changing copper-to-silver percentage tunes electrical properties for cost-sensitive applications that do not need very high conductivity.
At 90% copper, sheet resistance is 24 milliohms per square per mil, still described as very good. Because the system focuses on lower temperatures, it suits low-temperature substrates such as PET, fabric, TPU and paper. The speaker begins another copper-related point with 'very good' before the clip ends.
In this short video, you can learn:
* At 35% copper and 140 C, the champion sheet resistance is below three milliohms per square per mil at 25 microns.
* The 35% to 90% copper family becomes conductive at about 80 C and tunes conductivity by copper-to-silver ratio.
* At 90% copper, sheet resistance reaches 24 milliohms per square per mil for cost-sensitive, low-temperature substrates like PET, fabric, TPU and paper.
๐ **Clip Abstract** Silver-coated copper inks span 35% to 90% copper, with two particle sizes (D50s of three and around five microns) and more than six months at about four degrees Celsius. Champion 35% copper at 140 C gives below three milliohms per square per mil, while 90% copper gives 24 milliohms per square per mil, enabling lower-temperature substrates such as PET, fabric, TPU and paper.
About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin
USA: The Future of Electronics RESHAPED | USA
๐
Save the date: 9 and 10 June 2027
๐ Mountain View, California (Silicon Valley)
๐ Info: https://www.techblick.com/electronicsreshapedusa
Europe
The Future of Electronics RESHAPED | Berlin
๐
Save the date: 20 and 21 October 2027
๐ Berlin, Germany
๐ Info: https://www.techblick.com/electronicsreshaped
#SilverCoatedCopper, #SheetResistance, #CopperSilverRatio, #LowTemperatureSubstrates, #PrintedElectronics, #FlexibleElectronics
About this talk
โ High-Performance, Low-Cost Silver-Coated Copper Inks for Flexible and Printed Electronics ยท Rudy Ghosh ยท The Future of Electronics RESHAPED 2026 Berlin
Other talks by Rudy Ghosh
- Tailoring materials for applications & processes ยท The Future of Electronics RESHAPED 2025 USA
- Gold - Material Choice For Novel Applications ยท Perovskites Innovation Day 2025
- PulseForge Soldering-Using flash lamp technology for conventional solder alloy reflow ยท Printed, Hybrid, Structural, & 3D Electronics 2021
More highlights from Rudy Ghosh
- โถ What level of feature resolution and repeatability can be achieved with NovaCentrix's gold inks using aerosol printing? ยท The Future of Electronics RESHAPED USA | Boston 2025
- โถ What specific biomedical application is leveraging the high aspect ratio capabilities of NovaCentrix's aerosol-printed gold? ยท The Future of Electronics RESHAPED USA | Boston 2025
- โถ How does NovaCentrix approach customizing silver ink formulations to meet specific end-user requirements? ยท The Future of Electronics RESHAPED USA | Boston 2025
- โถ Why are traditional copper and silver printed electronics failing in the next generation of biocompatible sensors? ยท Additive, Sustainable or 3D Electronics Innovations Day 2025
- โถ How can we print 3D micro-electrode arrays with aspect ratios greater than ten using gold nanoparticles? ยท Additive, Sustainable or 3D Electronics Innovations Day 2025
- โถ Can printed additive electronics finally match the material performance of PVD and CVD vacuum-deposited thin films? ยท Additive, Sustainable or 3D Electronics Innovations Day 2025


