top of page

Rudy Ghosh

NovaCentrix

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Rudy Ghosh | NovaCentrix: What specific biomedical application is leveraging the high aspect ratio capabilities of NovaCentrix's aerosol-printed gold?

00:06:32 - 00:06:40

Other snippets from this talk

Summary of the clip:

What specific biomedical application is leveraging the high aspect ratio capabilities of NovaCentrix's aerosol-printed gold?

The speaker elaborates on the work done with the University of Santiago de Compostela, focusing on a specific application involving modular code arrays for biomedical purposes. These arrays are fabricated on TPU, a flexible substrate, using aerosol printing to create extremely high aspect ratio structures. The speaker mentions achieving aspect ratios over 10, with some instances close to 20, and the ability to create 40-micron lines with a length of approximately half a millimeter. This level of precision and aspect ratio is particularly valuable for the intended biomedical application.

The use of aerosol printing to create these high aspect ratio structures on flexible TPU substrates is highlighted as a significant advantage. The speaker emphasizes that this approach offers capabilities that are difficult, if not impossible, to achieve with more traditional fabrication methods. This underscores the unique value proposition of printed electronics in addressing specific application requirements where conventional processes fall short.

The speaker connects this specific application back to the broader theme of "killer applications" for printed electronics. By demonstrating the ability to create unique structures with high aspect ratios on flexible substrates, the speaker illustrates how printed electronics can enable solutions that are not feasible with traditional manufacturing techniques. This reinforces the potential of printed electronics to drive innovation in specialized fields like biomedical engineering.

In this short video, you can learn:

* The specific biomedical application of modular code arrays using aerosol-printed gold.
* The advantage of using flexible TPU substrates for these applications.
* The unique capabilities of aerosol printing in achieving high aspect ratio structures.

๐Ÿ“‹ **Clip Abstract:** This segment details the use of NovaCentrix's gold ink and aerosol printing to create high aspect ratio structures on TPU for modular code arrays in biomedical applications. It emphasizes the advantages of this approach over traditional fabrication methods.
๐Ÿ”— Link in comments ๐Ÿ‘‡

#AerosolPrinting, #PrintedGold, #HighAspectRatio, #FlexibleTPU, #BiomedicalEngineering, #PrintedElectronics

This is a highlight of the presentation:

Advanced ink solutions designed for fine-line printing with high-aspect ratios

The Future of Electronics RESHAPED USA | Boston 2025

​

​

UMass Boston

Organised By:

TechBlick

​

More Highlights from the same talk.

03:18 - 04:14

How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?

How can one ink family cover inkjet, aerosol jet, gravure and high-viscosity screen printing?

The ink family spans a wide viscosity range, from hundreds of centipoise to hundreds of thousands of centipoise. That breadth is the enabling variable: formulators can tailor an ink to a specific deposition process rather than forcing one process to accept a single fixed rheology.

At the low-viscosity end sit inkjet and aerosol jet. Flexographic and gravure printing occupy the middle range. Screen printing, direct-on-write processes and high-viscosity dispensing use the upper end. One portfolio therefore addresses process classes that normally demand different ink formulations, while customers reportedly use the entire viscosity and process range.

The portfolio is not limited to one metal system. Silver is the largest part, but copper inks are also produced. Because the same broad viscosity strategy is applied across material systems, the ink family can support multiple printing routes and multiple chemistries rather than a single silver-only, process-specific product.

In this short video, you can learn:
* Viscosity spans from hundreds to hundreds of thousands of centipoise.
* Inkjet and aerosol jet are low-viscosity, flexographic and gravure are middle-range, and screen, direct-on-write and high-viscosity dispensing are upper-range processes.
* Silver is the largest materials family, copper inks are also made, and customers use the full viscosity and process range.

๐Ÿ“‹ **Clip Abstract** The ink range covers hundreds to hundreds of thousands of centipoise and is tailored across inkjet, aerosol jet, flexographic, gravure, screen, direct-on-write and high-viscosity dispensing. Silver is the largest materials family, with copper inks also available, and customers use the full viscosity and process range.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
๐Ÿ“… Save the date: 9 and 10 June 2027
๐Ÿ“ Mountain View, California (Silicon Valley)
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshaped

#SilverCopperInks, #HighViscosityDispensing, #AerosolJetPrinting, #GravureScreenInks, #PrintedElectronics, #FlexibleElectronics

07:23 - 09:48

What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?

What do 35% to 90% copper ratios do to sheet resistance, cure temperature and substrate choice?

The silver-coated copper particles use two particle sizes, with D50s of three and around five microns. Stored at about four degrees Celsius, the ink is rated above six months, and actually lasts far longer. Champion data for 35% copper at 140 C is a sheet resistance below three milliohms per square per mil, or 25 microns.

That high performance holds across the whole material family, anywhere between 35% and 90% copper. The inks start becoming conductive at pretty much 80 C, which the speaker calls very desirable even for silver or copper inks. The goal is an economic architecture: changing copper-to-silver percentage tunes electrical properties for cost-sensitive applications that do not need very high conductivity.

At 90% copper, sheet resistance is 24 milliohms per square per mil, still described as very good. Because the system focuses on lower temperatures, it suits low-temperature substrates such as PET, fabric, TPU and paper. The speaker begins another copper-related point with 'very good' before the clip ends.

In this short video, you can learn:
* At 35% copper and 140 C, the champion sheet resistance is below three milliohms per square per mil at 25 microns.
* The 35% to 90% copper family becomes conductive at about 80 C and tunes conductivity by copper-to-silver ratio.
* At 90% copper, sheet resistance reaches 24 milliohms per square per mil for cost-sensitive, low-temperature substrates like PET, fabric, TPU and paper.

๐Ÿ“‹ **Clip Abstract** Silver-coated copper inks span 35% to 90% copper, with two particle sizes (D50s of three and around five microns) and more than six months at about four degrees Celsius. Champion 35% copper at 140 C gives below three milliohms per square per mil, while 90% copper gives 24 milliohms per square per mil, enabling lower-temperature substrates such as PET, fabric, TPU and paper.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
๐Ÿ“… Save the date: 9 and 10 June 2027
๐Ÿ“ Mountain View, California (Silicon Valley)
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshaped

#SilverCoatedCopper, #SheetResistance, #CopperSilverRatio, #LowTemperatureSubstrates, #PrintedElectronics, #FlexibleElectronics

05:55 - 07:25

What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?

What formulation choices deliver 87% metal loading and long shelf life for screen-printable silver-coated copper?

A range of materials, not a single ink, lets the silver-to-copper ratio be used to tune both the material and its electrical properties. The design target across the family is high conductivity and high performance even at low processing temperatures. Data sheets summarising what each grade delivers were taken directly from the technical documentation.

These inks sit in the high-viscosity range, which puts them in screen printing and direct ink or direct writing territory rather than inkjet. Metal loading is very, very high at 87%, so a jar is noticeably heavy and feels strongly viscous when stirred. That loading figure is the headline number for the family.

For screen printing, practical handling matters as much as the data: the inks clean up easily with IPA and similar solvents. Shelf life is long provided the material is kept in a fridge at around four degrees Celsius, which protects the formulation between print runs.

In this short video, you can learn:
* The silver-to-copper ratio is the lever used to tune material and electrical properties across the ink family.
* At 87% metal loading the inks are high viscosity, aimed at screen printing and direct writing rather than inkjet.
* IPA clean-up and refrigerated storage at about 4 degrees Celsius underpin the long shelf life.

๐Ÿ“‹ **Clip Abstract** A family of silver-coated copper inks uses the silver-to-copper ratio to tune material and electrical behaviour while targeting high conductivity and high performance at low processing temperatures. At 87% metal loading they fall in the high-viscosity range for screen printing and direct writing, clean up with IPA and hold a long shelf life when refrigerated at around 4 degrees Celsius.

About the speaker:
* Speaker: Rudy Ghosh
* Company: NovaCentrix
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
๐Ÿ“… Save the date: 9 and 10 June 2027
๐Ÿ“ Mountain View, California (Silicon Valley)
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
๐Ÿ“… Save the date: 20 and 21 October 2027
๐Ÿ“ Berlin, Germany
๐Ÿ“‹ Info: https://www.techblick.com/electronicsreshaped

#SilverCoatedCopper, #HighMetalLoading, #ScreenPrintingInks, #DirectInkWriting, #PrintedElectronics, #ConductiveInks


Other talks by Rudy Ghosh


More highlights from Rudy Ghosh

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page