top of page

Sebastian Gepp

Kundisch GmbH & Co. KG

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

Sebastian Gepp | Kundisch GmbH & Co. KG: How did consolidating a capacitive slider, display PCB and sealings into one hybrid film cut planned system cost by 12%?

05:12 - 06:18

Other snippets from this talk

Summary of the clip:

How did consolidating a capacitive slider, display PCB and sealings into one hybrid film cut planned system cost by 12%?

The customer's starting box comprised an enclosure, customer PCBs, sealings, and a display mounted on a separate PCB, plus a requested small capacitive film for the slider. In the original build these were discrete items, so the architecture carried multiple boards and components rather than a single interface substrate.

Rather than accept that discrete build, the team combined the parts into one film. The hybrid film integrates the requested slider with the display PCB and sealing elements, cutting the number of PCBs and components. Capacitive keys are routed on the tail so the customer can access them directly through a bus system.

The consolidated approach saved about 12% of the customer's initial cost planning. That reduction was attributed to fewer PCBs and fewer components used in the build. The project thus turned a requested small capacitive slider film into a more integrated HMI assembly while preserving direct bus access to the capacitive keys.

In this short video, you can learn:
* A customer box originally used separate enclosure, PCBs, sealings, a display PCB, and a small capacitive slider film.
* Combining those parts into one hybrid film reduced PCB and component count while keeping capacitive keys directly accessible via a bus system on the tail.
* The integrated film cut about 12% from the customer's initial cost planning.

📋 **Clip Abstract** A customer HMI build with separate enclosure, PCBs, sealings, display PCB, and a requested capacitive slider film was consolidated into one hybrid film. The integration reduced PCB and component count, retained direct bus access to the capacitive keys on the tail, and saved about 12% versus the initial cost planning.

About the speaker:
* Speaker: Sebastian Gepp
* Company: Kundisch GmbH & Co. KG
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#CapacitiveSliderFilm, #HybridFilmIntegration, #DisplayPCBIntegration, #BusSystemTail, #PrintedElectronics, #HMI

This is a highlight of the presentation:

Applications using Printed and Hybrid Electronics in the HMI Industry

Printed, Hybrid, Structural & 3D Electronics 2021

​

11-12 May 2021

Online

Organised By:

TechBlick

​

More Highlights from the same talk.

07:28 - 08:40

Why did a 360-degree emergency signal light replace right-angle rigid PCBs with a flexible LED film?

Why did a 360-degree emergency signal light replace right-angle rigid PCBs with a flexible LED film?

Flexible LED films are integrated into membrane keyboards to deliver the homogeneous illumination customers expect as a quality baseline. The films are also supplied as standalone products: a serial RGB LED film runs at the back with programming on it, while just illumination films are also available.

In a customer project with Schranner, emergency signal lights previously used rigid PCBs to mount all LEDs and achieve 360-degree illumination. Those PCBs were mounted at an angle of 90 degrees, so the illumination was not really 360 degrees. Film technology replaced that arrangement in the new design.

With the film approach, the project saved direct producing cost or material cost and achieved true 360-degree illumination. Another product named is custom USB keyboards: users plug them in and they work, like familiar computer USB keyboards. The examples cover membrane-keyboard illumination, standalone LED films, emergency signal lights and custom input devices.

In this short video, you can learn:
* Flexible LED films deliver homogeneous illumination for membrane keyboards and can also be used as standalone RGB or illumination films.
* Schranner's emergency signal lights moved from rigid PCBs mounted at 90 degrees to film technology, achieving true 360-degree illumination.
* The film approach saved direct producing cost or material cost compared with the previous right-angle rigid-PCB assembly.

📋 **Clip Abstract** Flexible LED films are used for homogeneous membrane-keyboard illumination and as standalone serial RGB or illumination films. In Schranner emergency signal lights, film technology replaced right-angle rigid PCBs, saving direct producing or material cost and delivering true 360-degree illumination.

About the speaker:
* Speaker: Sebastian Gepp
* Company: Kundisch GmbH & Co. KG
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#FlexibleLEDFilm, #MembraneKeyboardIllumination, #RGBLEDFilm, #True360Illumination, #PrintedElectronics, #HybridElectronics

05:46 - 06:56

Can a printed sensor hit 80% transparency while keeping resistance stable and tunable?

Can a printed sensor hit 80% transparency while keeping resistance stable and tunable?

The target is 80% optical transparency, chosen because that is typically acceptable on a display. Material options named include metal mesh, ITO, PEDOT and graphene. Beyond transparency, the sensor must be invisible and keep a constant temperature profile: when heated, resistance should remain stable.

Stability depends on material purity. Printing a very thin silver conductor may make it invisible, but the polymer matrix still changes temperature behaviour, so every sensor can differ. Material properties also need to be independent from the batch, requiring reliable production and a stable material.

Resistance must be tunable to customer demand because needs differ in detectable temperature, accuracy and readout. Production is intended to use internal resources, avoiding supplier minimum order quantities. The sensor also needs to be very thin, so the approach is to print it on film.

In this short video, you can learn:
* An 80% transparency threshold was selected as the level usually satisfactory on a display.
* A very thin printed silver conductor can be visually hidden, but its polymer matrix alters temperature behaviour and makes sensors differ.
* Batch-independent material properties and internal production are required to tune resistance without supplier minimum order quantities.

📋 **Clip Abstract** The transparent temperature sensor targets 80% transparency and stable resistance under heating, with metal mesh, ITO, PEDOT and graphene as candidate materials. It requires pure, batch-independent material, customer-tunable resistance and thin film printing, produced internally to avoid supplier minimum order quantities.

About the speaker:
* Speaker: Sebastian Gepp
* Company: Bopla Gehäuse Systeme GmbH
* Event: Electronics RESHAPED 2026 | Berlin
* Location: Estrel, Berlin

USA: The Future of Electronics RESHAPED | USA
📅 Save the date: 9 and 10 June 2027
📍 Mountain View, California (Silicon Valley)
📋 Info: https://www.techblick.com/electronicsreshapedusa

Europe
The Future of Electronics RESHAPED | Berlin
📅 Save the date: 20 and 21 October 2027
📍 Berlin, Germany
📋 Info: https://www.techblick.com/electronicsreshaped

#MetalMeshTransparency, #PEDOTGraphene, #PrintedSilverConductor, #BatchIndependentMaterial, #PrintedElectronics, #TransparentTemperatureSensors

10:16 - 11:40

What does a batteryless ePaper tag with 35 soldered components and an ERP-linked reader enable?

What does a batteryless ePaper tag with 35 soldered components and an ERP-linked reader enable?

The demonstrator is a very slim batteryless ePaper tag, currently PCB-based, with a flexible version under development. The complete system includes reader hardware and a software interface that hooks up to an ERP system. Based on an XML standard, images can be programmed depending on the ERP system.

Customers use the tags for routing job tickets: their paperwork moves onto ePaper, and after a job is done they create a new ePaper tag. A finished marketing example combines NFC reading technology and ePaper in one film. It simulates opening a box with a key, or uses a suitable RFID card placed on the setup, with the ePaper showing the actual status.

The 3D image shows the antenna and all needed components integrated into the setup. It has 35 components soldered directly on the film. The marketing implementation was done in German and English to target more customers at the moment. This illustrates a hybrid approach: film-integrated antenna and soldered components, NFC reading and an ePaper status display.

In this short video, you can learn:
* The tag is batteryless and currently PCB-based, with a flexible version in development.
* The reader and software interface connect to an ERP system, and XML standard programming sets images from ERP data.
* A marketing film combines NFC reading and ePaper, using a key simulation or RFID card to show actual status, with 35 components soldered directly on the film.

📋 **Clip Abstract** This clip presents a slim batteryless ePaper tag system, currently PCB-based with a flexible version in development, plus reader hardware and an ERP-linked software interface using XML standard programming. It shows job-ticket routing and a marketing film that combines NFC reading with ePaper, including a 3D setup with antenna and 35 components soldered directly on film.

About the speaker:
* Speaker: Sebastian Gepp
* Company: Kundisch GmbH & Co. KG
* Event: Printed, Hybrid, Structural & 3D Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, flexible hybrid electronics and 3D electronics
https://www.techblick.com/

#BatterylessEPaper, #NFCePaperFilm, #ERPLinkedTags, #FilmSolderedComponents, #PrintedHybridElectronics, #SmartLabels


About this talk

→ Applications using Printed and Hybrid Electronics in the HMI Industry · Sebastian Gepp · Printed, Hybrid, Structural, & 3D Electronics 2021


Other talks by Sebastian Gepp


More highlights from Sebastian Gepp

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page