Thomas Kolbusch | Coatema Coating Machinery GmbH: How are drop-on-demand inkjet heads, fluid recirculation and photonic sintering scaled on roll-to-roll lines?
12:51 - 14:36
Other snippets from this talk
Summary of the clip:
How are drop-on-demand inkjet heads, fluid recirculation and photonic sintering scaled on roll-to-roll lines?
On the machine, a Fujifilm Dimatic printhead runs in operation, and the development work covered fluid recirculation systems and overall digital-printing control, including dropwatching systems. The integration scope also includes NIR and photonic sintering, plus artificial intelligence to detect whether a printhead nozzle is closing. The design effort is therefore not only the head itself but the control and recirculation involved.
The scaling plan starts with a 300 mm system to be installed this year or at the beginning of next year in the R&D center, providing a complete inline process on 300 mm. From there, the intention is to scale to 500 mm and 1,000 mm, and the designs for those widths are already ready. The inkjet system sits in the front part of the unit.
The inkjet system must fit into the existing frame of the units so it can be combined with NIR and normal electrically heated dryers. Different inkjet systems can be integrated, and print capabilities have already been demonstrated at exhibitions. This is described as the first part beside laser patterning in digital fabrication; another system used daily is explicitly not digital.
In this short video, you can learn:
* A Fujifilm Dimatic printhead is operated on the machine, with development covering fluid recirculation and overall digital-printing control including dropwatching.
* The roadmap moves from a 300 mm inline R&D system to 500 mm and 1,000 mm, with designs ready.
* Inkjet integration must fit existing frames and can be combined with NIR and normal electrically heated dryers, alongside laser patterning.
📋 **Clip Abstract** Digital printing development covers a Fujifilm Dimatic printhead, fluid recirculation, dropwatching and AI-based nozzle-closing detection, with NIR and photonic sintering integrated into the process. The scale-up path starts at 300 mm inline and moves to 500 mm and 1,000 mm, while the inkjet unit is designed to fit existing frames and combine with NIR and electric dryers.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#InkjetPrintheads, #FluidRecirculation, #PhotonicSintering, #NozzleClosingDetection, #PrintedElectronics, #DigitalFabrication
This is a highlight of the presentation:
New & Digital Production Methods For Printed Electronics
More Highlights from the same talk.
03:06 - 05:23
Why is lot-size-one digital fabrication the key to localizing electronics manufacturing in Europe?
Why is lot-size-one digital fabrication the key to localizing electronics manufacturing in Europe?
Digital fabrication’s biggest advantage is that lot size one becomes real: one product can be made for the same cost as millions. Additive manufacturing and 3D printing already demonstrate this point. The stated target is to develop digital fabrication systems that also produce products in lot size one, because printed electronics is seen as having a big future, specifically in Europe.
For wearables, sensors, integrated smart systems and the Internet of Things, the argument is to use technologies that differentiate Europe from mass markets and mass-production methods in Asia. That means localization of production: in the area where products are sold, they are produced. It also means using Industry 4.0, combining digital fabrication and additive manufacturing, and using big data in the process to produce printed electronics.
The model is Manufaktur 2.0 with digital fabrication: small factories in houses producing goods used directly at the site where they were produced, like Europe started 100 years ago. One size can cost the same as millions, with personalized design for each customer—a big USP. It shifts global manufacturing to local manufacturing, supports sustainability and circular economy, reduces carbon footprint, and is a productivity boost for old economies and Europe, the real fourth revolution.
In this short video, you can learn:
* Lot size one means one product can be produced for the same cost as millions.
* Localization of production uses Industry 4.0, digital fabrication plus additive manufacturing, and big data in the process.
* Manufaktur 2.0 returns small factories producing personalized goods at the point of use, supporting sustainability and circular economy.
📋 **Clip Abstract** The clip explains that digital fabrication makes lot size one real: one product at the same cost as millions, as additive manufacturing and 3D printing already show, with a target to develop digital fabrication systems for products in lot size one. It links printed electronics in Europe to wearables, sensors, integrated smart systems and IoT, localized production using Industry 4.0, digital fabrication plus additive manufacturing, and big data, under a Manufaktur 2.0 model with sustainability and circular-economy benefits.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#LotSizeOne, #DigitalFabrication, #AdditiveManufacturing, #Manufaktur20, #PrintedElectronics, #LocalManufacturing
15:44 - 17:02
Can a piezo-driven slot die lip, moving just 300 microns, digitize low-viscosity OLED coating?
Can a piezo-driven slot die lip, moving just 300 microns, digitize low-viscosity OLED coating?
Intermittent coating is a proven, well-established process, heavily used today for basic intermittent coatings in battery applications, which the speaker calls a hot topic. But it is not fancy and, in his words, not very digital. That gap set the starting question: what technologies actually exist for these intermittent coating processes, and how can standard coating operations be moved into digital operation?
Within the European-funded project PiScale, the team developed a slot die coating system that is intermittent and can handle low-viscous media such as OLEDs. The mechanism is mechanical: the slot die lip is closed and opened by a piezo, and that piezo actuation is described as the digital part of the system. A specific ramp can be run with the piezo, shaping the opening and closing profile rather than switching it abruptly.
The mechanical movement of the slot die lip is only 300 microns, which the speaker stresses is not a lot, yet it enables the ramp operation shown. From there the drive is toward digital operation of the slot die systems and of the pumps. At the moment the work is still at stripe coatings, but it is presented as a big step forward for standard operations as well.
In this short video, you can learn:
* Intermittent slot die coating is already a proven process for battery applications but remains largely non-digital.
* In the PiScale project a piezo closes and opens the slot die lip mechanically, providing the digital actuation and a controllable ramp.
* The lip displacement is just 300 microns, and the current status is still stripe coatings while slot die and pump operation move to digital.
📋 **Clip Abstract** A European-funded project has built an intermittent slot die coating system that handles low-viscous media such as OLEDs by closing and opening the die lip with a piezo. The piezo gives a controllable ramp and digital operation of the slot die and pumps, with a lip movement of only 300 microns and current work still limited to stripe coatings.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#PiezoSlotDie, #IntermittentCoating, #OLEDCoating, #StripeCoating, #PrintedElectronics, #WetCoatingProcesses
09:52 - 11:20
What inline metrology and process steps were integrated into the Thessaloniki pilot line?
What inline metrology and process steps were integrated into the Thessaloniki pilot line?
The pilot line at the University of Thessaloniki combined standard and digital processes, including laser and inkjet, with measurement and control at multiple points. It integrated printing, slot-die coating, laser scribing, highly accurate registration control, further printing, the first inkjet system for digital fabrication, and winding. Inline quality control used ellipsometry and inline Raman, described as very unique at the time.
The described operation covered 20 meters, while the unit is stated as 90 meters in length, running at 30 meters per minute with a 300-millimeter working width. This remains a pilot-scale tool rather than a big-scale operation, despite the line length and speed. The process sequence runs from printing and coating through laser scribing and registration control to inkjet digital fabrication and final winding.
The unit is now to be upgraded in the European project REAL-NANO to add more inline quality-control functionality. That upgrade targets greater measurement and control capability on the existing pilot line. The transcript identifies ellipsometry and inline Raman as the original inline quality-control methods and lists registration control as very accurate within the process chain.
In this short video, you can learn:
* The Thessaloniki pilot line integrated printing, slot-die coating, laser scribing, registration control, inkjet digital fabrication, and winding.
* Its inline quality control used ellipsometry and inline Raman, with an upgrade planned under REAL-NANO for more functionality.
* The unit is 90 meters long and runs at 30 meters per minute with a 300-millimeter working width, remaining pilot-scale.
📋 **Clip Abstract** The clip details a pilot line at the University of Thessaloniki that measured and controlled standard and digital laser/inkjet processes across printing, slot-die coating, laser scribing, registration control, inkjet fabrication, and winding. It cites ellipsometry and inline Raman for inline quality control and notes a REAL-NANO upgrade to add more inline quality-control functionality on a 90-meter, 30-meter-per-minute, 300-millimeter-wide pilot unit.
About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online
Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/
#InlineRaman, #EllipsometryQC, #SlotDieCoating, #LaserScribing, #PrintedElectronics, #FlexibleElectronics
About this talk
→ New & Digital Production Methods For Printed Electronics · Thomas Kolbusch · Printed, Flexible, Hybrid, & InMold Electronics 2021
Other talks by Thomas Kolbusch
- Scaling perovskite from small scale R2R to big scale inline production systems · Perovskite Connect 2026
- Scaling Roll-to-Roll Flexible Hybrid Electronics: From Patented VIA Fabrication to Mainstream Manufacturing · Electronics RESHAPED USA 2026
- Laser drying of printed electronic and battery inks to reduce the dryer length in production lines and to improve the carbon footprint of these productions · The Future of Electronics RESHAPED 2025 USA
- LIFT Printing for high viscous materials in combination with laser drying. · Printed Electronics Innovation Day | Winter 2024
- Tech Pillars of the green hydrogen economy – how to scale the production methods for PEM Fuel cells from lab2fab. · The Future of Electronics RESHAPED 2024 Berlin
- Tech Pillars of the green hydrogen economy – how to scale the production methods for PEM Fuel cells from lab2fab. · The Future of Electronics RESHAPED 2024 USA
- The impact and challenges of using Roll2Roll process in industrial ramp-up · The Future of Photovoltaics: Organic, Perovskites, CIGS, Tandem 2024
- Upscaling OPV into production tech · The Future of Electronics RESHAPED | Berlin 2023
- Sustainable & smart packaging New social and industrial challenges for printed electronics · Innovations Festival: Printed, Flexible, Hybrid, 3D, Wearable, & Textile Electronics 2023
- Upscaling from lab2fab for OPV and Perovskite. · The Future of Photovoltaics: Organic, Perovskites, CIGS, Tandem 2022
More highlights from Thomas Kolbusch
- ▶ What five process pillars decide whether a perovskite coating can scale without losing yield? · Perovskite Connect 2026 | Berlin
- ▶ Why simulate slot-die pressure and meniscus before building hardware for perovskite? · Perovskite Connect 2026 | Berlin
- ▶ Why does an 85-metre inline line with full control matter for European scale-up? · Perovskite Connect 2026 | Berlin
- ▶ How do you slot-die coat 5–10 nm hole transport layers without losing the meniscus? · Perovskite Connect 2026 | Berlin
- ▶ How does heat and mass transfer fundamentally limit the speed of drying processes? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ What is the core principle behind using lasers to *improve*, not replace, conventional drying? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ At what stage of the drying process is laser technology most effectively applied, and why? · The Future of Electronics RESHAPED USA | Boston 2025
- ▶ Why settle for inkjet's viscosity limitations when Laser-Induced Forward Transfer can print high-viscosity materials with zero contact? · Printed Electronics Innovation Day 2024
- ▶ Can laser drying cut your roll-to-roll drying footprint in half while slashing operational costs by 30%? · Printed Electronics Innovation Day 2024
- ▶ How do you get from 10,000 to 100,000 fuel cell stacks per year without your cycle time killing your business? · The Future of Electronics RESHAPED 2024


