top of page

Thomas Kolbusch

Coatema Coating Machinery GmbH

* All members of the platform can watch the entire presentation.

 

Please register to become a member.

​

14:16 - 16:59

Other snippets from this talk

Summary of the clip:

Can Laser-Induced Forward Transfer (LIFT) bridge the gap between low-viscosity inkjet printing and high-throughput roll-to-roll manufacturing?

While conventional inkjet systems struggle with nozzle clogging and strict rheological constraints, LIFT technology accommodates exceptionally high-viscosity regimes. By utilizing a slot die to pre-coat a carrier belt, this process bypasses traditional fluidic bottlenecks, enabling the deposition of highly loaded functional inks up to 30,000 centipoise. This capability opens new pathways for depositing dense, high-performance materials that were previously incompatible with digital printing.

The mechanical robustess of this digital deposition method is further highlighted by its tolerance for large particulate matter. Capable of processing particle sizes up to 100 micrometers within wet ink layers of 10 to 15 microns, the system prevents the sedimentation and clogging issues that plague fine-nozzle architectures. This makes it an ideal candidate for printing advanced functional slurries, large-flake graphene, and coarse metallic conductors without sacrificing structural integrity.

Transitioning LIFT to continuous roll-to-roll production requires sophisticated material management to remain economically viable. To prevent massive material waste, the system integrates a continuous ink recycling loop that maintains stable viscosity over long production runs, replacing only the volume deposited onto the substrate. This closed-loop recycling enables the uninterrupted deposition of complex, unbroken circuits over hundreds of meters of flexible substrate.

In this short video, you can learn:
* How pre-inking a carrier belt allows LIFT to process high-viscosity functional inks up to 30,000 centipoise.
* The particle size and wet layer thickness thresholds that distinguish LIFT from traditional inkjet printing.
* The critical role of continuous ink recycling and viscosity control in enabling roll-to-roll digital deposition.

📋 **Clip Abstract**
The speaker discusses the technical operating window of a continuous LIFT printing system, detailing its viscosity limits, wet layer thicknesses, and particle size capabilities. He also explains the necessity of a continuous material recycling loop to maintain ink stability during long roll-to-roll production runs.

🎤 Speaker: Thomas Kolbusch
🏢 Company: Coatema Coating Machinery GmbH
📅 Event: Printed Electronics Innovation Day 2024
📍 Location: TechBlick | Online Platform

🌐 Learn more at the next TechBlick event: https://www.techblick.com

#LaserInducedForwardTransfer, #MicroLEDMassTransfer, #PerovskiteQuantumDots, #DiffractiveWaveguides, #AugmentedRealityDisplays, #FlexibleElectronics

This is a highlight of the presentation:

​

Printed Electronics Innovation Day 2024

Display Innovation Day 2024

​

TechBlick | Online Platform

Organised By:

TechBlick

​

More Highlights from the same talk.

03:06 - 05:23

Why is lot-size-one digital fabrication the key to localizing electronics manufacturing in Europe?

Why is lot-size-one digital fabrication the key to localizing electronics manufacturing in Europe?

Digital fabrication’s biggest advantage is that lot size one becomes real: one product can be made for the same cost as millions. Additive manufacturing and 3D printing already demonstrate this point. The stated target is to develop digital fabrication systems that also produce products in lot size one, because printed electronics is seen as having a big future, specifically in Europe.

For wearables, sensors, integrated smart systems and the Internet of Things, the argument is to use technologies that differentiate Europe from mass markets and mass-production methods in Asia. That means localization of production: in the area where products are sold, they are produced. It also means using Industry 4.0, combining digital fabrication and additive manufacturing, and using big data in the process to produce printed electronics.

The model is Manufaktur 2.0 with digital fabrication: small factories in houses producing goods used directly at the site where they were produced, like Europe started 100 years ago. One size can cost the same as millions, with personalized design for each customer—a big USP. It shifts global manufacturing to local manufacturing, supports sustainability and circular economy, reduces carbon footprint, and is a productivity boost for old economies and Europe, the real fourth revolution.

In this short video, you can learn:
* Lot size one means one product can be produced for the same cost as millions.
* Localization of production uses Industry 4.0, digital fabrication plus additive manufacturing, and big data in the process.
* Manufaktur 2.0 returns small factories producing personalized goods at the point of use, supporting sustainability and circular economy.

📋 **Clip Abstract** The clip explains that digital fabrication makes lot size one real: one product at the same cost as millions, as additive manufacturing and 3D printing already show, with a target to develop digital fabrication systems for products in lot size one. It links printed electronics in Europe to wearables, sensors, integrated smart systems and IoT, localized production using Industry 4.0, digital fabrication plus additive manufacturing, and big data, under a Manufaktur 2.0 model with sustainability and circular-economy benefits.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#LotSizeOne, #DigitalFabrication, #AdditiveManufacturing, #Manufaktur20, #PrintedElectronics, #LocalManufacturing

12:51 - 14:36

How are drop-on-demand inkjet heads, fluid recirculation and photonic sintering scaled on roll-to-roll lines?

How are drop-on-demand inkjet heads, fluid recirculation and photonic sintering scaled on roll-to-roll lines?

On the machine, a Fujifilm Dimatic printhead runs in operation, and the development work covered fluid recirculation systems and overall digital-printing control, including dropwatching systems. The integration scope also includes NIR and photonic sintering, plus artificial intelligence to detect whether a printhead nozzle is closing. The design effort is therefore not only the head itself but the control and recirculation involved.

The scaling plan starts with a 300 mm system to be installed this year or at the beginning of next year in the R&D center, providing a complete inline process on 300 mm. From there, the intention is to scale to 500 mm and 1,000 mm, and the designs for those widths are already ready. The inkjet system sits in the front part of the unit.

The inkjet system must fit into the existing frame of the units so it can be combined with NIR and normal electrically heated dryers. Different inkjet systems can be integrated, and print capabilities have already been demonstrated at exhibitions. This is described as the first part beside laser patterning in digital fabrication; another system used daily is explicitly not digital.

In this short video, you can learn:
* A Fujifilm Dimatic printhead is operated on the machine, with development covering fluid recirculation and overall digital-printing control including dropwatching.
* The roadmap moves from a 300 mm inline R&D system to 500 mm and 1,000 mm, with designs ready.
* Inkjet integration must fit existing frames and can be combined with NIR and normal electrically heated dryers, alongside laser patterning.

📋 **Clip Abstract** Digital printing development covers a Fujifilm Dimatic printhead, fluid recirculation, dropwatching and AI-based nozzle-closing detection, with NIR and photonic sintering integrated into the process. The scale-up path starts at 300 mm inline and moves to 500 mm and 1,000 mm, while the inkjet unit is designed to fit existing frames and combine with NIR and electric dryers.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#InkjetPrintheads, #FluidRecirculation, #PhotonicSintering, #NozzleClosingDetection, #PrintedElectronics, #DigitalFabrication

09:52 - 11:20

What inline metrology and process steps were integrated into the Thessaloniki pilot line?

What inline metrology and process steps were integrated into the Thessaloniki pilot line?

The pilot line at the University of Thessaloniki combined standard and digital processes, including laser and inkjet, with measurement and control at multiple points. It integrated printing, slot-die coating, laser scribing, highly accurate registration control, further printing, the first inkjet system for digital fabrication, and winding. Inline quality control used ellipsometry and inline Raman, described as very unique at the time.

The described operation covered 20 meters, while the unit is stated as 90 meters in length, running at 30 meters per minute with a 300-millimeter working width. This remains a pilot-scale tool rather than a big-scale operation, despite the line length and speed. The process sequence runs from printing and coating through laser scribing and registration control to inkjet digital fabrication and final winding.

The unit is now to be upgraded in the European project REAL-NANO to add more inline quality-control functionality. That upgrade targets greater measurement and control capability on the existing pilot line. The transcript identifies ellipsometry and inline Raman as the original inline quality-control methods and lists registration control as very accurate within the process chain.

In this short video, you can learn:
* The Thessaloniki pilot line integrated printing, slot-die coating, laser scribing, registration control, inkjet digital fabrication, and winding.
* Its inline quality control used ellipsometry and inline Raman, with an upgrade planned under REAL-NANO for more functionality.
* The unit is 90 meters long and runs at 30 meters per minute with a 300-millimeter working width, remaining pilot-scale.

📋 **Clip Abstract** The clip details a pilot line at the University of Thessaloniki that measured and controlled standard and digital laser/inkjet processes across printing, slot-die coating, laser scribing, registration control, inkjet fabrication, and winding. It cites ellipsometry and inline Raman for inline quality control and notes a REAL-NANO upgrade to add more inline quality-control functionality on a 90-meter, 30-meter-per-minute, 300-millimeter-wide pilot unit.

About the speaker:
* Speaker: Thomas Kolbusch
* Company: Coatema Coating Machinery GmbH
* Event: Printed, Flexible, Hybrid & InMold Electronics 2021
* Location: Online

Join TechBlick - the home of printed electronics, additive electronics, hybrid electronics, sustainable electronics
https://www.techblick.com/

#InlineRaman, #EllipsometryQC, #SlotDieCoating, #LaserScribing, #PrintedElectronics, #FlexibleElectronics


Other talks by Thomas Kolbusch


More highlights from Thomas Kolbusch

More Snippets
CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page