top of page

Innovations Festival 2023: Printed, Flexible, Hybrid, 3D, Wearable, & Textile Electronics

Online event by TechBlick, 22 June 2023, 10:30am - 9:30pm CET:. 71 talks from 66 organisations, with 59 highlight videos and clips.

(Free-to-Attend) Innovations Festival: RESHAPING the Future of Electronics

We invite engineers, researchers, entrepreneurs, inventors, and end users from around the world to join 500+ participants, 65+ presenters, and 50+ exhibitors online on 22 June at the interactive TechBlick Innovation Festival

#AdditiveElectronics #PrintedElectronics #3DElectronics #WearableTextiles #TextileElectronics  #SoftElectronics #SustainableElectronics

This is a carefully curated event weaving together fantastic talks with superb networking and immersive virtual exhibition where you can move around with your own avatar.

The programme covers all key application and technology advancements, reflecting the beautiful diversity of this field.

The networking will happen in the immersive virtual platform as well as in round-robin speed networking sessions.

Topics covered

R2R Nanolithography, Nano-Scale Wafer Printing, Smart Skin Patches, 3D Touch Surfaces, Quantum Dots, Stretchable Liquid Metal Inks, Jet Metallization, Laser Induced Forward Transfer, Fuel Cells, Printed Batteries, Organic Photovoltaics, R2R PCB Production, Hybrid Circuits, 3D Electronics, InMold Electronics, Smart Surfaces, Ultra Fine Line Printing, Novel Interconnect Technology, E-Textiles, Printed Displays, Printed Sensors, Printed Sensors, Innovative Paste Technologies, Smart Packaging, Additively Manufactured Electronics, OTFTs, Perovskites, Inkjet, Aerosol, Electrohydrodynamic Printing, Advanced Dispensing, 3D Printing, LIFT, Digital Plating, Direct Wire, Robotic Platforms, Ink-Less Printing, Path Planning and Control, Selective Jetting, Lighting, 3D Printed Electronics, PCB Production, Semiconductor Packaging, EMI Shielding, Microwave and mmWave Devices, Semiconductor Production, Photovoltaics, Photodetectors, Quantum Dots, QLEDs, OLED-QLED, MicroLEDs, Circuit and/or PCB Design and Prototyping, Ceramic (HTCC/LTCC), Batteries, Screen Printing, Assembly, R2R, Electronic Textiles, Wearable Medical Sensors, Intelligent Skin Patches.

Talks

  • The potential of femtoliter-level droplet with super inkjet systems. Dr.Kazuhiro Murata, CEO, Founder, Sij Technology.
  • 3D Additive Lithography for Electronics. Jeroen Sol, Scientist Innovator, TNO at Holst.
  • Cd-free Quantum Dot Colour Converters for MicroLED Applications. Mohammad Kiaee, Materials Scientist, QustomDot. MicroLED technology is on its way to replacing traditional display technologies by bringing added value propositions to the consumer market, including high brightness, excellent lifetime, high resolution, and superior efficiency, with applications spanning from wearable devices, augmented/virtual reality, and ultrahigh-definition TVs. To date, challenges in scaling pick-and-place processes and pro…
  • Using SSAIL technology for fast development of flexible circuits. Tadas Kildusis, CCO, Akoneer. Selective Surface Activation Induced by a Laser (SSAIL) technology is one of the new methods that can address the challenges in circuit formation on flexible substrates. By adapting laser and chemical plating parameters, SSAIL can be used on a wide range of flexible substrate materials to create high-precision and high-quality circuit patterns with strong adhesion, making it highly suitable for us…
  • Inkjet printable stretchable electrodes for organic electronic applications.. Manuel Gensler, Physical Chemist, Research Scientist, Fraunhofer IAP.
  • Sustainable materials and processes for printed electronics. Zachary J. Davis, Team Manager, Danish Technological Institute. The DTI Printed Electronics group has been focused on development of sustainable materials and processes for printed electronics. In this talk you will hear from two of our EU projects, concerning the use of bio-based materials for on body EMG measurements and the use of copper materials and digital printing methods for sustainable production of membrane switches and electrochemical sensors. Fin…
  • Revolutionizing Microelectronics Applications with XTPL's Ultra-Precise Deposition Solution. Lukasz Kosior, Business Development Manager, XTPL.
  • Printed & Organic Electronics Services at RISE Research Institute of Sweden – For Greener Electronics. Duncan Platt, Group Manager, RISE Research Institutes of Sweden.
  • Join the printing Ecosystem with the SUSS LP50 platform. Dennis Kuppens, Product manager inkjet, SUSS MicroTec.
  • Every Object Becomes Interactive With Printed Electronics. Philip Renners, Vice President Research & Development, Witte Technology.
  • Laser Sintering - a sustainable and rapid post-process for high volume production. Alexander Goerk, Business Development Manager, Hamamatsu. Diode lasers are by far the most efficient method to introduce thermal energy into NIR absorbing materials. Fortunately, most conductive inks absorb the 940nm of the Hamamatsu cw SPOLD laser, allowing a homogeneous and rapid sintering result comparable to other thermal post-processing technologies. The use of laser line optics favours scalable, yet highly sustainable high volume production, for ex…
  • Challenges in Printing Ion-Selective Sensors on Skin-Compatible Films. Andrzej Pepłowski, R&D Technologist/Project Manager, Warsaw University.
  • Speed Networking. , Speed Networking.
  • Speed Networking. , Speed Networking.
  • Smart and Smarter, with Additive Manufacturing Solution, Beyond Simple Sustainable RFID antenna/inlay.. Phil Chen, General Manager, Smooth & Sharp. S&S’s DOP, Direct On Paper is a sustainable paper RFID antenna solution which is both plastic-free and avoids chemical etching process. A HF loop antenna can be printed directly onto standard graphic printing paper with DOP solution. More than 10 years ago, PragmatIC created a new type of integrated circuit (IC) called FlexICs, that are thin, flexible and ultra-low cost, aimed at connecting for…
  • Reliable Mass Production of E-Textiles by Using Embroidery Technology. Steliyan Vasilev, ZSK/3E Smart Solutions. Embroidery is a textile manufacturing technique that has its roots in historic hand-stitched garment design. However, with the invention of computers, this textile manufacturing technique has seen a resurgence due to its high levels of material optimization. Embroidery allows the textile engineer to place single fibers, yarns, fiber bundles, or even wires with high precision in a variable, predesi…
  • Highly Scaled Gravure Printing. Rolf Meyerhans, NSM Norbert Schläfli. nsm, based in Zofingen, Switzerland is a company which specializes in the developing and manufacturing of high-precision printing and coating systems in the field of Printed Electronics. Rolf joint nsm in 2022. He has over 30 years worked in the development of mechanical components. He gained a long experience in mechanical design, dimensioning, process analysis and structural simulations. He is r…
  • Piezotech® Electroactive for Organic Electronics. Fabrice Domingues Dos Santos, R&D & General Manager, Arkema.
  • Methods for Printed and Additively-Manufactured Electronics: “which one(s) should I use for my application”?. Neil Chilton, Technical Director, Printed Electronics Ltd. With an increasingly large number of electronic additive-manufacturing processes available, it can be confusing to know which methods are applicable for your application. Printed Electronics Limited (PEL) is a manufacturer and product development company with very long experience printable electronics. PEL also represent some of the leading equipment manufacturers in the industry. In this short pr…
  • Sense your Future: your tailor-made solution using PyzoFlex®. Gregor Scheipl, Marketing Business Development Executive, Joanneum Research. PyzoFlex® represents a smart sensor technology that can easily be integrated as an additional component in a wide variety of surfaces/structures. This allows existing or new products to be equipped with additional sensory functions. It is based on completely (screen-)printed physical sensors that react to pressure and temperature changes as well as to structure-borne sound (vibration). The core el…
  • Printed platinum and palladium? Really!. Klaus Mertens, CEO, OrelTech. Inkjet printed silver and copper can be considered “established” at least among printed electronics insiders – with their industry adoption starting to pick up speed. As a result, new variants of particle inks and innovations and curing have been emerging, which gives industrial producers a few curing options beyond brute heating. In contrast, the range of metals available for printing – esp. high…
  • Printed Electronics – a true booster for innovation in wearable healthcare. Pauline Hibon, Managing Director - Sales & Strategy, Quad Industries. n this presentation, we will discuss the use of printed electronics in the development of customised electrode patches and smart textiles. Quad Industries has leveraged this technology to create innovative wearable sports, healthcare and comfort products that offer several advantages over traditional approaches. Through the use of practical use cases, we will showcase the benefits of printed elect…
  • Hybrid Printed Electronics (HPE) Are The Future Of The Industry.. Ashok Sridhar, CEO, TracXon.
  • DOTITE Electrically Conductive Sintering Adhesives and Package Level Shielding for Semiconductors. David Dewey, Sales, Fujikura Kasei. Presenting DOTITE materials designed to improve performance and open up new design possibilities for semiconductors and other electronic components.
  • Unlock your project's full potential with NETO Innovation. Stéphanie Limage, Innovation Manager Associate, NETO Innovation. NETO Innovation specializes in setting up projects to finance your R&D: Horizon Europe projects, EIC (Pathfinder, Transition and Accelerator), Eureka and National French projects. Our team is composed of 3 PhDs with expertise in green energies (solar, hydrogen, batteries, bio-energy, carbon capture and storage), printed and flexible hybrid electronics and their related applications (IoT, EMI shiel…
  • Time to Think Beyond Stretch in Wearable Electronics. Saeed Madadi, Celanese. Celanese Intexar™ line of Stretchable, Washable inks and films have been the premier materials for transforming materials into smart garments since 2018. Since the pandemic, the adoption of wearable technology has taken off not only in fitness applications but also healthcare. As such the testing requirements and needs have changed since the advent of wearable technology. Learn how the Celanese …
  • Robust internet-of-thing devices for digital agriculture, food, healthcare and smart infrastructure. Ali Shakouri, Professor of Electrical and Computer Engineering, Purdue College of Engineering. Integrated circuits (ICs) have revolutionized computing and communication in the last couple of decades. There are many efforts to use similar principles to develop low-cost Internet of things (IoT) devices to help solve societal grand challenges in water, food and healthcare. Here, we present development of a low-cost printed sensor platform as well as its hybrid integration with ICs for electron…
  • The mass production of a smart textile sock that measures stress behaviour. Luc Van Neer, CEO & Owner, Metafas.
  • Exhibition Session 1. , Exhibition 1.
  • Exhibition Session 1. , Exhibition 1.
  • Overview About ELANTAS High Potential Functional Inks And Application Cases. Philipp Hölzl, Technical Sales Manager, ELANTAS Europe. In this presentation, we will talk about new inks for Heaters in the field of InMold applications. Autonomous driving comes more and more important for the automotive industry. For that reason, we need Radar System which can work under every weather conditions. We will introduce the challenge of thermoformable silver conductive ink in the field of thermoforming process and how to avoid “Hot Spots”…
  • Beyond Printing Thermistors. David Britton, Director, PST Sensors. Just over a decade ago, PST Sensors in South Africa introduced its first printed temperature sensor – a simple NTC thermistor printed on paper using its first-generation semiconducting silicon ink. In 2023, PST Sensors Europe in the UK is now implementing PST’s fourth generation sensor ink in EV batteries, agrifoodtech and healthtech. The latest generation of inks exhibit improved adhesion to a wi…
  • Sustainable & smart packaging New social and industrial challenges for printed electronics. Thomas Kolbusch, Director Sales, Marketing, Technology, VP, Coatema Coating Machinery GmbH. Smart packaging is becoming increasingly important in the context of steadily rising packaging waste. Plastic films and paper materials are used in a wide range of daily life products. The largest amount of this use is attributable to the packaging industry e.g., food and pharmaceutical packaging. Global production of packaging-related materials is continuously growing and as a result the industry…
  • Advancements In Multimaterial Printing Of Hybrid Ceramic-Based Components With Machine Learning Optimization. Prashantkumar Pandey, Scientific Assistant, Fraunhofer IKTS. In recent years, there has been a growing demand for advanced electronic components that exhibit improved functionalities and enhanced design flexibility. Traditional manufacturing techniques often struggle to meet these requirements, particularly in the case of ceramics. These materials are characterized by outstanding properties, but which are inherently difficult to shape and process. However, …
  • Additive Manufacture of Copper Micro-Wire Transparent Heaters. Chris O'Connor, VP, Global Business Group, Eastman Kodak. Many flexible heater products are produced using printing techniques. As applications requiring transparent antennas increase in number, it makes sense to use similar additive manufacturing techniques for flexible heaters. In all cases, each mass-produced heater is a replicate of the last, making their manufacture well suited for “analog” print manufacturing, such as flexography. The use of hig…
  • With Digital Printing Technologies towards Sustainable Electronics. Dr. Florian Janek, Hahn-Schickard. Printing technologies have several advantages compared to conventional electronics, e.g. printed circuit board technology, including a more resource-efficient use of materials. Especially, digital printing processes such as inkjet and aerosol jet are environmentally friendly and can be used flexibly. The processes mentioned are able to use a wide range of materials and functionalise a variety of s…
  • Surface modification of wearable microneedle-based biosensor systems. Dr. Giorgio C. Mutinati, Senior Research Engineer & Project Manager, AIT Austrian Institute of Technology. To serve the increasing demand for low-cost and easy-to-use point-of-care (POC) diagnostic systems for healthcare and lifestyle, upscaling of the underlying biosensor system concepts using novel functionalization strategies for sample preparation or signal generation is crucial. The Molecular Diagnostics competence unit of the AIT Austrian Institute of Technology GmbH addresses this need by invest…
  • Digital Screen Printing: A Future Game Changer for Printed Electronics Manufacturing. Marcel Strobel, Chief Operating Officer, Quantica3D. In this talk, we will explore how digital screen printing could potentially revolutionize the manufacturing of printed electronics. Marcel Strobel will introduce NovoJet, an additive manufacturing technology that enables this new method of production. Diving into the benefits that come with it, including the ability to print complex circuitry and its cost-effectiveness for small to medium-sized pr…
  • Latest coating line: premises, challenges and outcomes. Marco de Luca, Division Manager Flexible Substrates, Coveme.
  • Room temperature bonding in printed and flexible electronics – realizing novel solutions with a focus on cost and sustainability. Morten Lindberget, VP Business Development and Sales, CondAlign AS. CondAlign develops and produces adhesive anisotropic conductive films, based on their unique technology. These adhesive ACFs combine unique properties making them very well suited for room temperature bonding in the printed, flexible and hybrid electronics area. They do not require any post processing, and are ideal for efficiently bonding to temperature sensitive substrates, for instance in a pic…
  • Materials for Next-Generation Organic Photovoltaic Modules. Arthur Hendsbee, Technology Director, Brilliant Matters. Organic photovoltaic technologies are a 3rd generation solar technology which has been steadily improving in the past decade due to rapid evolutions in materials design, device stacks and processing strategies. Due to their high efficiency, non-toxic nature and low-cost-high-volume manufacturing potential, several market-ready applications are now emerging for this technology. For instance, photov…
  • Multilayer Silicon RF System-in-Package Technique Using Magnetically Aligned ZTACH® ACE. John Yundt, Vice President of Sales and Business Development, SunRay Scientific. In this work, we propose a novel packaging concept for highly integrated RF systems using SunRay Scientific’s magnetically aligned ZTACH® ACE. We demonstrate the ability to "grow" z-axis interconnects allowing for multilayer packages that are not sensitive to the height between pads. Using this effect, we introduce two approaches to integrating multiple silicon wafers on top of each other, creatin…
  • Sustainable flexPCB Production: Reflow-solderable Printed Electronics. Kevin Schmid, Manager & Engineer, Innovation Lab. InnovationLab presents a novel printed circuit boards (PCBs ) production method based on additive manufacturing, which helps to meet higher environmental standards for electronics production while also reducing costs. The circuits are screen printed and are compatible with a conventional reflow soldering processes.
  • Accelerating Innovation with Henkel’s PTC Ink Solutions. Thibaut Soulestin, Application Engineer EIMEA, Henkel. Henkel Adhesive Technologies has developed a large material portfolio of conductive inks and coatings suitable for printed electronics technology. Today, a global, cross-functional Printed Electronics Team manages the development of printed electronics applications with a cross-industry focus on market trends driven by digital transformation, building on more than four decades of market and materi…
  • Exhibition Session 2. , Exhibition 2.
  • Exhibition Session 2. , Exhibition 2.
  • Micro Assembly For SiC-Based Power Modules. Aart-Jan Hoeven, International Project / Technology Manager, DoMicro. The technology for integrating dies is an important enabler for the realization of advanced applications. This includes applications with power modules. Critical steps for the integration of such modules are in the micro assembly, for example in the wire bonding and the die attach. This presentation will highlight results from work on these steps in a project for prototyping power modules for elec…
  • Next Generation 3D Formable Substrates. Menno Bos, Sales Manager International, KIMOTO.
  • Making an Impact with Inkjet. Additive process in Electronics Production. The Future of Additive Manufacturing. Kai Keller, VP Business Development Europe, Notion Systems.
  • Looking for a printed electronics company ?. David Lafourcade, Business Development Manager, BeLink Solutions. Belink Solutions has capitalized a strong knowledge of high volume manufacturing capabilities in conventional electronics as well as screen printing solutions. We design and produce from POC to mass production, flexible, expandable electronics, as well as 2D and 3D printed electronics with components or even modules! We manage the complete manufacturing process from screen printing to the final …
  • Opportunities and challenges of printed force sensors on 3D substrates. Stefan Ernst, CEO, binder ITZ. The demand for printed sensors is constantly growing over the last few years. Of special importance for various industrial applications are force sensors. They measure stress or bending along one or more axis. Conventional sensors need a time consuming gluing process to mount the sensor onto the substrate. The force sensors from binder are printed directly onto the component where measuring is nee…
  • Arrays for On-Demand Water Quality Monitoring. Adam Scotch, Tech Leader | Materials Scientist, Brewer Science.
  • Recent Developments of Conductive Inks for Printed Electronics. Alan Brown, Business Development Manager, Nagase ChemteX.
  • HPCAP, the smallest fountain pen in the world: design with submicronic precision. Amin M'BARKI, Co-Founder & CEO, Hummink.
  • Utilizing NanoJet Aerosol Printing on Non-Planar Surfaces. Dov Henry Phillips, Sales Manager, IDS.
  • New PTC Printed Carbon Resistor Pastes for Self-regulating Heaters. Gregory Berube, Director of Innovations Americas, Heraeus. For decades, polymer thick-film (PTF) systems have provided a low-cost option for screen-printing simple electronic circuits, especially on temperature sensitive substrates. The ability to apply PTF pastes on a wide variety of substrates has facilitated numerous applications, for instance membrane touch-switch keypads, buss bars for touch screens, various types of sensors, and flexible circuitry.…
  • Inkjet & Dispensing for Printed Electronics: R&D to prototype and Pilot Production. Paul Best, CEO, ImageXpert. In this presentation, ImageXpert will discuss new technologies in inkjet for evaluating and optimizing processes in R&D and production. These tools allow you to build a better understanding of your inkjet process, improve the performance, and accelerate the rate of development. We will explore the latest analysis tools, from new dropwatching technologies to smarter prototyping printers.
  • Unlocking the Full Potential of Silver Nanowires: Highly Conductive Inks and Composites. Ajay A. Virkar, Co-Founder / CTO, C3Nano. Silver Nanowires (AgNWs) have long been recognized as excellent building blocks for transparent conductive inks and coatings, but recent proprietary breakthroughs by C3Nano have led to the development of new classes of highly concentrated AgNW-based inks and dispersions with exceptional properties. In this talk, we will describe the advantages of NWs as conductive fillers in inks and composites ov…
  • Exhibition Session 3. , Exhibition 3.
  • Exhibition Session 3. , Exhibition 3.
  • Hybrid Electronics Integration – A Bridge Between Packaging and Systems. Janos Veres, Director & VP of Engineering, NextFlex. NextFlex, together with its extended ecosystem network, has been exploring the potential for novel electronics packaging and integration on a system level. This includes electronics integration in wearables, textiles, medical, and high-density integration of RF circuitry, all the way to integration of antennas on the skins of aerial vehicles. Such high-level integration is enabled by the combinati…
  • How Far Can We Flex?. Alicen Pittenger, Director of Sales, Conductive Technologies. An overview of the expanding role of a contract manufacturer in the production of flexible wearable technologies.
  • Fabrication of Multi-Sensor Vital Sign Patches for Ambulatory Care. Mark Poliks, SUNY Distinguished Professor, Bingham University.
  • Towards High-Performance Printed Electronics and Circuits. Ravinder Dahiya, Professor,President,Fellow, Leader, Northeastern University. The miniaturization-based advances in electronics have revolutionized computing and communication. through high-performance planar electronics. However, electronics on planar and stiff substrates does not go well with several emerging applications (e.g., robots, wearables and vehicles, digital health etc.). These applications require electronics with high-performance (similar to the conventional s…
  • Inkjet Additively printed copper Circuits With SMT Component Assembly. Pradeep Lall, Professor & Director, Auburn University.
  • Printed Energy, any shape, anywhere. Shailesh Patel, Senior Vice President Product Management, Printed Energy. Printed Energy, early-stage US based hard science company with deep expertise in electro chemistry, printed electronics, and manufacturing automation. The current focus is on flexible, printed, and thin batteries integrated into fully built-up circuits for a complete device such as active RFID. These batteries are non-toxic, environmentally friendly and can be manufactured in any shape and size b…
  • Potential for Flexible Hybrid Electronics to Enable Sustainable Manufacturing and Products. Girish Wable, Snr Manager Strategic Capabilities, Jabil.
  • New Innovations in Printing Dielectric Layers in Multilayer/Multimaterial for Additive Manufacturing of Electronics. Daniel Slep, CEO, ChemCubed. Dielectric materials play a critical role in modern electronics as they serve as insulators that prevent electrical charges from flowing between conductive parts. In recent years, significant advances have been made in the development of dielectric materials, driven by the demand for improved performance and efficiency in electronic devices. Novel methods have been developed for processing and int…
  • Optimizing the tool chain from Design through manufacturing for Printed Electronics. David Wiens, Siemens.
  • Final Networking Session. , Final Networking.
  • Final Networking Session. , Final Networking.

Organisations on stage

Sij Technology, TNO at Holst, QustomDot, Akoneer, Fraunhofer IAP, Danish Technological Institute, XTPL, RISE Research Institutes of Sweden, SUSS MicroTec, Witte Technology, Hamamatsu, Warsaw University, Speed Networking, Smooth & Sharp, ZSK/3E Smart Solutions, NSM Norbert Schläfli, Arkema, Printed Electronics Ltd, Joanneum Research, OrelTech, Quad Industries, TracXon, Fujikura Kasei, NETO Innovation, Celanese, Purdue College of Engineering, Metafas, Exhibition 1, ELANTAS Europe, PST Sensors, Coatema Coating Machinery GmbH, Fraunhofer IKTS, Eastman Kodak, Hahn-Schickard, AIT Austrian Institute of Technology, Quantica3D, Coveme, CondAlign AS, Brilliant Matters, SunRay Scientific, Innovation Lab, Henkel, Exhibition 2, DoMicro, KIMOTO, Notion Systems, BeLink Solutions, binder ITZ, Brewer Science, Nagase ChemteX, Hummink, IDS, Heraeus, ImageXpert, C3Nano, Exhibition 3, NextFlex, Conductive Technologies, Bingham University, Northeastern University, Auburn University, Printed Energy, Jabil, ChemCubed, Siemens, Final Networking.

Members watch the full recordings with slides on the TechBlick platform. Get the annual pass · All TechBlick events · Explore our content

Topics on TechBlick

CONTACT US

KGH Concepts GmbH

Mergenthalerallee 73-75, 65760, Eschborn

+49 17661704139

admin@techblick.com

TechBlick is owned and operated by KGH Concepts GmbH

Registration number HRB 121362

VAT number: DE 337022439

  • LinkedIn
  • YouTube

Sign up for our newsletter to receive updates on our latest speakers and events AND to receive analyst-written summaries of the key talks and happenings in our events.

Thanks for submitting!

© 2026 by KGH Concepts GmbH

bottom of page